Power PCB Relay
G6C
• Subminiature 20.07 L x 14.99 W x 9.91 H mm
(0.79 L x 0.59 W x 0.39 H in).
• Low power consumption (200 mW).
• Semi-sealed and sealed types available.
• Unique moving magnet armature (Moving Loop System)
reduces relay size, magnetic interference, and contact
bounce time.
• Single and double-winding latching types available.
• High sensitivity in a compact package.
• Long life assured by high contact pressure.
Ordering Information
To Order: Select the part number and add the desired coil voltage rating (e.g., G6C-1117P-US-DC6).
Type
Non-latching
Contact form
SPST-NO
Construction
Sealed
SPST-NO + SPST-NC
SPST-NO
G6C-2114P-US
Semi-sealed
SPST-NO + SPST-NC
Single-winding latching contact
SPST-NO
SPST-NO
SPST-NO + SPST-NC
G6CU-1117P-US
G6CU-2117P-US
Sealed
SPST-NO + SPST-NC
SPST-NO
G6CU-1114P-US
G6CU-2114P-US
Semi-sealed
SPST-NO + SPST-NC
Dual-winding latching contact
G6C-1117P-US
G6C-2117P-US
Sealed
SPST-NO + SPST-NC
SPST-NO
Model
G6C-1114P-US
G6CK-1114P-US
G6CK-2114P-US
Semi-sealed
G6CK-1117P-US
G6CK-2117P-US
■ Accessories
Back Connecting Sockets
Relay
G6C-1114P-US
Model
P6C-06P
G6C-1117P-US
G6C-2114P-US
G6C-2117P-US
G6CU-1114P-US
G6CU-1117P-US
G6CU-2114P-US
G6CU-2117P-US
G6CK-1114P-US
P6C-08P
G6CK-1117P-US
G6CK-2114P-US
G6CK-2117P-US
644
Power PCB Relay
G6C
Specifications
■ Contact Data
Non-latching
Load
SPST-NO
Resistive load
(p.f. = 1)
Rated load
SPST-NO + SPST-NC
Inductive load
(p.f. = 0.4) (L/R = 7 ms)
Resistive load
(p.f. = 1)
Inductive load
(p.f. = 0.4) (L/R = 7 ms)
10 A at 250 VAC
5 A at 250 VAC
8 A at 250 VAC
3.5 A at 250 VAC
10 A at 30 VDC
5 A at 30 VDC
8 A at 30 VDC
3.5 A at 30 VDC
Contact material
Ag-Alloy
Carry current
10 A
Max. operating voltage
380 VAC, 125 VDC
Max. operating current
10 A
Max. switching capacity
2,500 VA, 300 W
Min. permissible load
10 mA, 5 VDC
8A
8A
1,250 VA, 220 W
2,000 VA, 240 W
875 VA, 170 W
Latching
Load
SPST-NO
Resistive load
(p.f. = 1)
Rated load
SPST-NO + SPST-NC
Inductive load
(p.f. = 0.4) (L/R = 7 ms)
Resistive load
(p.f. = 1)
Inductive load
(p.f. = 0.4) (L/R = 7 ms)
10 A at 250 VAC
5 A at 250 VAC
8 A at 250 VAC
3.5 A at 250 VAC
10 A at 30 VDC
5 A at 30 VDC
8 A at 30 VDC
3.5 A at 30 VDC
Contact material
Ag-Alloy
Carry current
10 A
Max. operating voltage
380 VAC, 125 VDC
Max. operating current
10 A
Max. switching capacity
2,500 VA, 300 W
Min. permissible load
10 mA, 5 VDC
8A
1,250 VA, 220 W
8A
3.5 A
2,000 VA, 240 W
875 VA, 105 W
■ Coil Data
Non-latching
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Armature
OFF
Armature
ON
3
66.70
45
0.078
0.067
5
40
125
0.22
0.18
6
33.30
180
0.36
0.29
12
16.70
720
1.32
1.13
24
8.30
2,880
4.96
4.19
Pick-up
voltage
Dropout
voltage
Maximum
voltage
% of rated voltage
70% max.
10% min.
160% max.
at 23°C (73°F)
Power
consumption
(mW)
Approx. 200
130% max.
at 70°C
(158° F)
Single-winding Latching Type
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Set pick-up
voltage
Reset pick-up
voltage
Maximum
voltage
% of rated voltage
3
66.70
45
0.09
5
40
125
0.25
6
33.30
180
0.36
12
16.70
720
1.75
24
8.30
2,880
5.83
70% max.
70% min.
160% max.
at 23°C (73°F)
Power
consumption
(mW)
Approx. 200
130% max.
at 70°C
(158°F)
Note: The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with a tolerance of ±10%.
Power PCB Relay
G6C
645
■ Coil Data
Dual-winding Latching Type
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Set
Coil
Set
pick-up
voltage
Reset
Coil
3
93.50
32.10
0.03
0.03
5
56
89.30
0.07
0.08
6
46.70
129
0.10
0.12
12
23.30
514
0.37
0.47
24
11.70
2,056
1.56
1.46
Reset
pick-up
voltage
Maximum
voltage
Power
consumption
(mW)
% of rated voltage
70% max.
70% max.
160% max.
Approx. 280
at 23°C (73°F)
110% max.
at 70°C
(158°F)
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with a tolerance of ±10%.
2. Operating characteristics are measured at a coil temperature of 23°C (73°F).
3. The minimum pulse width of the set and reset voltage is 20 ms.
■ Characteristics
Non-latching
Contact resistance
30 mΩ max.
Operate (set) time
10 ms max. (mean value: approx. 5 ms)
Release (reset) time
Bounce time
Operating
frequency
Latching
10 ms max. (mean value: approx. 2 ms)
Operate
Approx. 3 ms
Release
Approx. 3 ms
Mechanical
18,000 operations/hour
Electrical
1,800 operations/hour (under rated load)
Insulation resistance
1,000 MΩ min. (at 500 VDC)
Dielectric strength
2,000 VAC, 50/60 Hz for 1 minute between coil and contacts, non-latching types
2,000 VAC, 50/60 Hz for 1 minute between contacts of different poles, non-latching
1,000 VAC, 50/60 Hz for 1 minute between contacts of same pole, non-latching
250 VAC, 50/60 Hz for 1 minute between set and reset coils, latching types
Surge withstand voltage
Vibration
Shock
4,500 V x 40 µs (between coil and contacts, non-latching)
Mechanical durability
10 to 55 Hz; 1.50 mm (0.06 in) double amplitude
Malfunction durability
10 to 55 Hz; 1.50 mm (0.06 in) double amplitude
Mechanical durability
Approx. 100 G
Malfunction durability
Approx. 10 G
Ambient temperature
-25 to 70°C (-13° to 158°F)
Humidity
Service life
45 to 85% RH
Mechanical
50 million operations min. (at operating frequency of 18,000 operations/hour)
Electrical
See “Characteristic Data”
Weight
Approx. 5.6 g (0.20 oz)
Note: Data shown are of initial value.
646
Power PCB Relay G6C
■ Characteristic Data
Non-latching Types
Maximum switching capacity
Ambient temperature
maximum voltage
(reference only)
Rated operating voltage (V)
Rated operating voltage (V)
Maximum voltage (%)
Rated operating current (A)
Service life (x103 operations)
SPST-NO + SPST-NC
Rated operating current (A)
SPST-NO
Electrical service life
Rated operating current (A)
Ambient temperature (°C)
Latching Types
Maximum switching capacity
Ambient temperature
maximum voltage
(reference only)
Rated operating voltage (V)
Rated operating voltage (V)
Maximum voltage (%)
Rated operating current (A)
Service life (x103 operations)
SPST-NO + SPST-NC
Rated operating current (A)
SPST-NO
Electrical service life
Rated operating current (A)
Ambient temperature (°C)
Dimensions
Unit: mm (inch)
■ Non-latching Relays
G6C-
117P-US
Terminal arrangement/
Internal connections
(Bottom view)
Mounting holes
[Bottom view, Tolerance ±2.54 (0.10)]
G6C-1117P-US, G6C-1114P-US
Note:
and
indicate mounting orientation marks.
Power PCB Relay
G6C
647
G6C-
114P-US
Terminal arrangement/
Internal connections
(Bottom view)
Mounting holes
[Bottom view, Tolerance ±2.54 (0.10)]
G6C-1117P-US, G6C-1114P-US
■ Latching Relays
Single winding types, 1-pole
G6CU-1117P-US, G6CU-1114P-US
Terminal arrangement/
Internal connections
(Bottom view)
Mounting holes
(Bottom view)
Terminal arrangement/
Internal connections
(Bottom view)
Mounting holes
(Bottom view)
Single winding types, 2-pole
G6CU-2117P-US, G6CU-2114P-US
Note:
648
and
indicate mounting orientation marks.
Power PCB Relay G6C
Unit: mm (inch)
Double winding types, 1-pole
G6CK-1117P-US, G6CK-1114P-US
Terminal arrangement/
Internal connections
(Bottom view)
Mounting holes
(Bottom view)
Terminal arrangement/
Internal connections
(Bottom view)
Mounting holes
(Bottom view)
Mounting height of relay
width connecting socket
Mounting holes
(Bottom view)
Double winding types, 2-pole
G6CK-2117P-US, G6CK-2114P-US
■ Accessories
Connecting sockets – P6C-06P, P6C-08P
P6C-06P
P6C-08P
Note:
and
indicate mounting orientation marks.
Power PCB Relay
G6C
649
■ Approvals
UL (File No. E41643)/CSA (File No. LR31928)
Type
G6C-1114P-US
Contact form
SPST-NO
Coil rating
3 to 60 VDC
G6C-1117P-US
Contact ratings
10 A, 250 VAC (General purpose)
10 A, 30 VDC (Resistive)
TV-5
1/4 HP, 125 VAC
1/4 HP, 250 VAC (Motor load)
1/3 HP, 250 VAC (Motor load)
600 WT, 120 VAC (Tungsten)
530 VA, 265 VAC, 2 A max. pilot duty
43.2 VA, 30 VDC, pilot duty
22 LRA, 3.6 FLA, 30 VDC
B300 pilot duty
G6C-2114P-US
SPST-NO +
G6C-2117P-US
SPST-NC
3 to 60 VDC
8 A, 250 VAC (General purpose)
8 A, 30 VDC (Resistive)
TV-5
1/4 HP, 125 VAC
1/4 HP, 250 VAC (Motor load)
600 WT, 120 VAC (Tungsten)
530 VA, 265 VAC, 2 A max. pilot duty
43.2 VA, 30 VDC, pilot duty
22 LRA, 3.6 FLA, 30 VDC
B300/R300 pilot duty
G6C(U/K)-1114P-US
SPST-NO
3 to 60 VDC
G6C(U/K)-1117P-US
10 A, 250 VAC (General purpose)
10 A, 30 VDC (Resistive)
1/6 HP, 125 VAC (Motor load)
TV-5
1/4 HP, 125 VAC
1/4 HP, 250 VAC (Motor load)
1/3 HP, 250 VAC (Motor load)
600 WT, 120 VAC (Tungsten)
G6C(U/K)-2114P-US
SPST-NO +
G6C(U/K)-2117P-US
SPST-NC
3 to 60 VDC
8 A, 250 VAC (General purpose)
8 A, 30 VDC (Resistive)
1/6 HP, 125 VAC (Motor load)
TV-5
1/4 HP, 125 VAC
1/4 HP, 250 VAC (Motor load)
1/3 HP, 250 VAC (Motor load)
600 WT, 120 VAC (Tungsten)
VDE (File No. 2314)
Type
G6C-1117P-VD
Contact form
SPST-NO
Coil rating
DC3, 12, 24V
G6C-1114P-VD
Contact ratings
250 VAC
10 A (Resistive)
5 A (Inductive)
G6C-2117P-VD
SPST-NO +
G6C-2114P-VD
SPST-NC
DC3, 12, 24V
250 VAC
7 A (Resistive)
3.5 A (Inductive)
Note: 1. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance characteristics
individually defined in this catalog.
2. In the interest of product improvement, specifications are subject to change.
650
Power PCB Relay G6C
MEMO
Power PCB Relay
G6C
651
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotations, acknowledgments, invoices, purchase orders and other
documents, whether electronic or in writing, relating to the sale of products or
services (collectively, the "Products") by Omron Electronic Components LLC
("Seller"). Seller hereby objects to any terms or conditions proposed in
Buyer's purchase order or other documents which are inconsistent with, or in
addition to, these Terms.
2. Prices; Payment. All prices stated are current, subject to change without
notice by Seller. Buyer agrees to pay the price in effect at time of shipment.
Payments for Products received are due net 30 days unless otherwise stated
in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of
invoices sent to Buyer after deducting transportation charges, taxes and
duties, and will be allowed only if (i) the invoice is paid according to Seller's
payment terms and (ii) Buyer has no past due amounts owing to Seller.
4. Currencies. If the prices quoted herein are in a currency other than U.S. dollars, Buyer shall make remittance to Seller at the then current exchange rate
most favorable to Seller and which is available on the due date; provided that if
remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller available during
the period between the due date and the date remittance is actually made.
5. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the importation or sale of the Products.
6. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Seller or required to be collected directly or
indirectly by Seller for the manufacture, production, sale, delivery, importation,
consumption or use of the Products sold hereunder (including customs duties
and sales, excise, use, turnover and license taxes) shall be charged to and
remitted by Buyer to Seller.
7. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Seller, Seller reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Seller may (without liability
and in addition to other remedies) cancel any unshipped portion of Products
sold hereunder and stop any Products in transit until Buyer pays all amounts,
including amounts payable hereunder, whether or not then due, which are
owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Seller fully against all costs or expenses arising in
connection therewith.
9. Force Majeure. Seller shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:
1. Shipments shall be by a carrier selected by Seller;
2. Such carrier shall act as the agent of Buyer and delivery to such carrier
shall constitute delivery to Buyer;
3. All sales and shipments of Products shall be FOB shipping point (unless
otherwise stated in writing by Seller), at which point title to and all risk of
loss of the Products shall pass from Seller to Buyer, provided that Seller
shall retain a security interest in the Products until the full purchase price is
paid by Buyer;
4. Delivery and shipping dates are estimates only.
5. Seller will package Products as it deems proper for protection against
normal handling and extra charges apply to special conditions.
11. Claims. Any claim by Buyer against Seller for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Seller within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products
from Seller in the condition claimed.
12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Seller (or such other period expressed
in writing by Seller). Seller disclaims all other warranties, express or implied.
(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Seller further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer
responsible for labor charges for removal or replacement thereof) the noncomplying Product or, at Seller's election, to repay or credit Buyer an amount
equal to the purchase price of the Product; provided that in no event shall
Seller be responsible for warranty, repair, indemnity or any other claims or
expenses regarding the Products unless Seller's analysis confirms that the
Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of
any Products by Buyer must be approved in writing by Seller before shipment.
Seller shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies, or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing
are not to be construed as an amendment or addition to the above warranty.
13. Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN
CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in
no event shall liability of Seller exceed the individual price of the Product on
which liability is asserted.
14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and
its employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Seller and defend or settle
any action brought against Seller to the extent that it is based on a claim that
any Product made to Buyer specifications infringed intellectual property rights
of another party.
15. Property; Confidentiality. The intellectual property embodied in the Products is
the exclusive property of Seller and its affiliates and Buyer shall not attempt to
duplicate it in any way without the written permission of Seller. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling
shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and
strictly prevent disclosure to any third party.
16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right
and no course of dealing between Buyer and Seller shall operate as a waiver
of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder
without Seller's written consent. (c) Law. These Terms are governed by Illinois law (without regard to conflict of law principles). Federal and state courts
in Illinois shall have exclusive jurisdiction for any dispute hereunder.
(d) Amendment. These Terms constitute the entire agreement between Buyer
and Seller relating to the Products, and no provision may be changed or
waived unless in writing signed by the parties. (e) Severability. If any provision
hereof is rendered ineffective or invalid, such provision shall not invalidate any
other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice.. (g) Definitions. As used
herein, "including" means "including without limitation".
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to
separate industry or government regulations.
(iii)Use in consumer products or any use in significant quantities.
(iv)Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's
programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as a
guide for the user in determining suitability and does not constitute a warranty.
It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your
application. Please consult with your Seller representative at any time to confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the best
of our knowledge as of the date of this publication, with the requirements of the
European Union's Directive on the Restriction of certain Hazardous Substances ("RoHS"), although the requirements of RoHS do not take effect until
July 2006. These requirements may be subject to change. Please consult our
website for current information.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
Cat. No. JB301-E3-01
3/05
OMRON CANADA, INC.
OMRON ON-LINE
885 Milner Avenue
Toronto, Ontario M1B 5V8
Global - http://www.omron.com
USA - http://www.components.omron.com
Canada - http://www.omron.ca
416-286-6465
Specifications subject to change without notice
Printed in USA