P4SMA SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE 5.5 to 214 Volts PEAK PULSE POWER 400 Watts SMA/DO-214AC Unit: inch (mm) FEATURES • For surface mounted applications in order to optimize board space. .114(2.90) .098(2.50) • Low profile package • Built-in strain relief .062(1.60) .047(1.20) • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O .181(4.60) .157(4.00) • High temperature soldering : 260°C /10 seconds at terminals .096(2.44) .078(2.00) .012(.305) .006(.152) • In compliance with EU RoHS 2002/95/EC directives MECHANICAL DATA .060(1.52) .030(0.76) • Case: JEDEC DO-214AC,Molded plastic over passivated junction. • Terminals: Solder plated,solderable per MIL-STD-750, Method 2026 • Polarity: Color band denotes positive end (cathode) .008(.203) .002(.051) .208(5.28) .188(4.80) • Standard Packaging:12mm tape (EIA-481) • Weight: 0.002 ounce, 0.064 gram DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types P4SMA6.8 thru types P4SMA250. Electrical characteristics apply in both directions. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. R ating Symbol Value Uni ts Peak Pulse Power D i ssi pati on on T A = 25 OC (Notes 1,2,5, Fi g.1) PPPM 400 Watts Peak Forward Surge C urrent per Fi g.5 (Note 3) IFSM 40 Amps Peak Pulse C urrent on 10/1000s waveform(Note 1)Fi g.2 IPPM see Table 1 Amps Steady State Power D i ssi pati on (NOTE 4) PM(AV) 1.0 Watts Operati ng Juncti on and Storage Temperature Range TJ,TSTG -55 to +150 O C NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25 OC per Fig. 2. 2. Mounted on 5.0mm2 copper pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minutes maximum. 4. Lead temperature at 75 OC = TL. 5. Peak pulse power waveform is 10/1000uS. STAD-MAY.25.2007 PAGE . 1 P4SMA SERIES Reverse Stand-off Voltage Part Number Breakdown Voltage Test Current VBR @ I T BI V Max. Clamp Voltage P eak Pulse Current VC @ I PP I PP I R @ VRWM VRWM UNI Reverse L e a ka g e IT M i n. M a x. V V 6.12 Marking C ode UNI BI mA µA µA V A UNI BI 7.48 10 1000 2000 10.8 38 MZA NZA 400W Transient Voltage Suppressor P4SMA6.8 P4SMA6.8C 5.5 P4SMA6.8A P4SMA6.8CA 5.8 6.45 7.14 10 1000 2000 10.5 40 MZB NZB P4SMA7.5 P4SMA7.5C 6.05 6.75 8.25 10 500 1000 11.7 36 MZC NZC P4SMA7.5A P4SMA7.5CA 6.4 7.13 7.88 10 500 1000 11.3 37 MZD NZD P4SMA8.2 P4SMA8.2C 6.63 7.38 9.02 10 200 400 12.5 33 MZE NZE P4SMA8.2A P4SMA8.2CA 7.02 7.79 8.61 10 200 400 12.1 35 MZF NZF P4SMA9.1 P4SMA9.1C 7.37 8.19 10 1 50 100 13.8 30 MZG NZG 7.78 8.65 9.5 1 50 100 13.4 31 MZH NZH 8.1 9 11 1 10 20 15 28 MZJ NZJ 9.5 10.5 1 10 20 14.5 29 MZK NZK P4SMA9.1A P4SMA9.1CA P4SMA10 P4SMA10C P4SMA10A P4SMA10CA 8.55 P4SMA11 P4SMA11C 8.92 9.9 12.1 1 5 10 16.2 26 MZL NZL P4SMA11A P4SMA11CA 9.4 10.5 11.6 1 5 10 15.6 27 MZM NZM P4SMA12 P4SMA12C 9.72 10.8 13.2 1 5 5 17.3 24 MZN NZN P4SMA12A P4SMA12CA 10.2 11.4 12.6 1 5 5 16.7 25 MZP NZP P4SMA13 P4SMA13C 10.5 11.7 14.3 1 5 5 19 22 MZQ NZQ P4SMA13A P4SMA13CA 11.1 12.4 13.7 1 5 5 18.2 23 MZR NZR P4SMA15 P4SMA15C 12.1 13.5 16.5 1 5 5 22 19 MZS NZS P4SMA15A P4SMA15CA 12.8 14.3 15.8 1 5 5 21.2 20 MZT NZT P4SMA16 P4SMA16C 12.9 14.4 17.6 1 5 5 23.5 18 MZU NZU P4SMA16A P4SMA16CA 13.6 15.2 16.8 1 5 5 22.5 19 MZV NZV P4SMA18 P4SMA18C 14.5 16.2 19.8 1 5 5 26.5 16 MZW NZW P4SMA18A P4SMA18CA 15.3 17.1 18.9 1 5 5 25.2 17 MZX NZX P4SMA20 P4SMA20C 16.2 18 22 1 5 5 29.1 14 MZY NZY PSMA20A P4SMA20CA 17.1 19 21 1 5 5 27.7 15 MZZ NZZ P4SMA22 P4SMA22C 17.8 19.8 24.2 1 5 5 31.9 13 MXA NXA P4SMA22A P4SMA22CA 18.8 20.9 23.1 1 5 5 30.6 14 MXB NXB P4SMA24 PSMA24C 19.4 21.6 26.4 1 5 5 34.7 12 MXC NXC P4SMA24A P4SMA24CA 20.5 22.8 25.2 1 5 5 33.2 13 MXD NXD P4SMA27 P4SMA27C 21.8 24.3 29.7 1 5 5 39.1 11 MXE NXE P4SMA27A P4SMA27CA 23.1 25.7 28.4 1 5 5 37.5 11.2 MXF NXF P4SMA30 P4SMA30C 24.3 27 33 1 5 5 43.5 10 MXG NXG P4SMA30A P4SMA30CA 25.6 28.5 31.5 1 5 5 41.4 10 MXH NXH P4SMA33 P4SMA33C 26.8 29.7 36.3 1 5 5 47.7 9 MXJ NXJ P4SMA33A P4SMA33CA 28.2 31.4 34.7 1 5 5 45.7 9 MXK NXK P4SMA36 P4SMA36C 29.1 32.4 39.6 1 5 5 52 8 MXL NXL P4SMA36A P4SMA36CA 30.8 34.2 37.8 1 5 5 49.9 8.4 MXM NXM P4SMA39 P4SMA39C 31.6 35.1 42.9 1 5 5 56.4 7.4 MXN NXN P4SMA39A P4SMA39CA 33.3 37.1 41 1 5 5 53.9 7.8 MXP NXP P4SMA43 P4SMA43C 34.8 38.7 47.3 1 5 5 61.9 6.8 MXQ NXQ STAD-MAY.25.2007 PAGE . 2 P4SMA SERIES Reverse Stand-off Voltage Part Number Breakdown Voltage Test Current VBR @ I T BI V Max. Clamp Voltage P eak Pulse Current VC @ I PP I PP I R @ VRWM VRWM UNI Reverse L e a ka g e IT M i n. M a x. V V Marking C ode UNI BI mA µA µA V A UNI BI 400W Transient Voltage Suppressor P4SMA43A P4SMA43CA 36.8 40.9 45.2 1 5 5 59.3 7.1 MXR NXR P4SMA47 P4SMA47C 38.1 42.3 51.7 1 5 5 67.8 6.2 MXS NXS P4SMA47A P4SMA47CA 40.2 44.7 49.4 1 5 5 64.8 5 MXT NXT P4SMA51 P4SMA51C 41.3 45.9 56.1 1 5 5 73.5 5.7 MXU NXU P4SMA51A P4SMA51CA 43.6 48.5 53.6 1 5 5 70.1 6 MXV NXV P4SMA56 P4SMA56C 45.6 50.4 61.6 1 5 5 80.5 5.2 MXW NXW P4SMA56A P4SMA56CA 47.8 53.2 58.8 1 5 5 77 5.5 MXX NXX P4SMA62 P4SMA62C 50.2 55.8 68.2 1 5 5 89 4.7 MXY NXY P4SMA62A P4SMA62CA 53 58.9 65.1 1 5 5 85 5 MXZ NXZ P4SMA68 P4SMA68C 55.1 61.2 74.8 1 5 5 98 4.3 MYA NYA P4SMA68A P4SMA68CA 58.1 64.6 71.4 1 5 5 92 4.6 MYB NYB P4SMA75 P4SMA75C 60.7 67.5 82.5 1 5 5 108 3.9 MYC NYC P4SMA75A P4SMA75CA 64.1 71.3 78.8 1 5 5 103 4.1 MYD NYD P4SMA82 P4SMA82C 66.4 73.8 90.2 1 5 5 118 3.6 MYE NYE P4SMA82A P4SMA82CA 70.1 77.9 86.1 1 5 5 113 3.7 MYF NYF P4SMA91 P4SMA91C 73.7 81.9 100 1 5 5 131 3.2 MYG NYG P4SMA91A P4SMA91CA 77.8 86.5 95.5 1 5 5 125 3.4 MYH NYH P4SMA100 P4SMA100C 81 90 110 1 5 5 144 2.9 MYJ NYJ P4SMA100A P4SMA100CA 85.5 95 105 1 5 5 137 3.1 MYK NYK P4SMA110 P4SMA110C 89.2 99 121 1 5 5 158 2.7 MYL NYL P4SMA110A P4SMA110CA 94 105 116 1 5 5 152 2.8 MYM NYM P4SMA120 P4SMA120C 97.2 108 132 1 5 5 173 2.4 MYN NYN P4SMA120A P4SMA120CA 102 114 126 1 5 5 165 2.5 MYP NYP P4SMA130 P4SMA130C 105 117 143 1 5 5 187 2.2 MYQ NYQ P4SMA130A P4SMA130CA 111 124 137 1 5 5 179 2.3 MYR NYR P4SMA150 P4SMA150C 121 135 165 1 5 5 215 2 MYS NYS P4SMA150A P4SMA150CA 128 143 158 1 5 5 207 2 MYT NYT P4SMA160 P4SMA160C 130 144 176 1 5 5 230 1.8 MYU NYU P4SMA160A P4SMA160CA 136 152 168 1 5 5 219 1.9 MYV NYV P4SMA170 P4SMA170C 138 153 187 1 5 5 244 1.7 MYW NYW P4SMA170A P4SMA170CA 145 162 179 1 5 5 234 1.8 MYX NYX P4SMA180 P4SMA180A 146 162 198 1 5 5 258 1.6 MYY NYY P4SMA180A P4SMA180CA 154 171 189 1 5 5 246 1.7 MYZ NYZ P4SMA200 P4SMA200A 162 180 220 1 5 5 287 1.5 MWA NWA P4SMA200A P4SMA200CA 171 190 210 1 5 5 274 1.5 MWB NWB P4SMA220 P4SMA220A 175 198 242 1 5 5 344 1.2 MWC NWC P4SMA220A P4SMA220CA 185 209 231 1 5 5 328 1.2 MWD NWD P4SMA250 P4SMA250C 202 225 275 1 5 5 360 1.1 MWE NWE P4SMA250A P4SMA250CA 214 237 263 1 5 5 344 1.2 MWF NWF STAD-MAY.25.2007 PAGE . 3 P PPM ,PEAK PULSE FORWARD,KW P4SMA SERIES 100 Non-Repetitve Pulse Wavefom Shown in Figure.3 O T A = 25 C 10 1.0 Mounted on 5.0mm Copper Land Areas 0.1 0.1 10 1.0 100 1000 10000 PEAK PULSE FORWARD (P PP) OR CURRENT (I PP) DERATING IN PERCENTAGE % 100 75 50 25 0 0 25 td,PULSE WIDTH, micro sec 75 100 125 150 175 200 O T A ,AMBIENT TEMPERATURE, C Fig.1 PEAK PULSE POWER RATING CURVE Fig.2 DERATING CURVE 10,000 150 I PPM ,PEAK PULSE CURRENT,% 50 O tf = 10usec Ha lf Va lue -Ip p 2 10/1000u se c Wa ve fo rm a s De fine d b ye R.E.A. 50 e -kt td 0 0 1.0 2.0 3.0 4.0 C J ,CAPACITANCE,p F Peak Value Ippm 100 Tj= 25 C f= 1.0MHZ Vsig = 50mVp -p O T A = 25 C Pulse Width (td) is Defined as the Point where the Peak Current Decayst to 50% of Ipp 1,000 Me a sure d a t Ze ro Bia s 100 Me a sure d a t Sta nd -Off Vo lta ge (VRWM) T,TIME,ms Fig.3 PULSE WAVEFORM I FSM ,PEAK FORWARD SURGE CURRENT, AMPERES 10 1.0 2.0 5.0 10 20 50 100 200 50 V( RWM), REVERSE STAND-OFF VOLTAGE, VOLTS TJ= TJm a x 8.3m s Sing le Ha lf SinepWave JEDEC M e tho d 40 Fig.4 TYPICAL JUNCTION CAPACITANCE 30 20 10 0 1 2 4 10 20 40 100 NUMBER OF CYCLES AT 60Hz Fig.5 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PLEASE REFER THE TVS APPLICATION NOTE IN PANJIT WEBSITE http://www.panjit.com/protection-transient-voltage-suppressors.html STAD-MAY.25.2007 PAGE . 4 P4SMA SERIES MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 7.5K per 13" plastic Reel T/R - 1.8Kper 7” plastic Reel LEGAL STATEMENT Copyright PanJit International, Inc 2007 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. STAD-MAY.25.2007 PAGE . 5