Ordering number : ENN6944A SBS805 Schottky Barrier Diode SBS805 30V, 1A Rectifier Applications • Package Dimensions High frequency rectification (switching regulators, converters, choppers). unit : mm 1294 • 3 0.4 0.4 1 0.05 2 0.95 0.7 4 2.8 1.6 1 Electrical Connection 5 0.15 3 0.6 4 0.6 • 5 0.9 • 2.9 Low forward voltage (IF=0.5A, VF max=0.40V) (IF=1.0A, VF max=0.47V). Short reverse recovery time(trr max.=15ns). Composite type with 2 low VF SBDs in one package, facilitating high-density mounting. The SBS805 is composed of 2 chips that are equivalent to the SBS005. 0.2 • 0.2 [SBS805] Features 1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode SANYO : CPH5 1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode 2 Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Repetitive Peak Reverse Voltage VRRM 30 V Nonrepetitive Peak Reverse Surge Voltage 30 V Average Output Current VRSM IO Surge Forward Current IFSM 50Hz sine wave, 1 cycle 1 A 10 A Junction Temperature Tj --55 to +125 °C Storage Temperature Tstg --55 to +125 °C Marking : SD Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N0901 GI IM / 31901GI IM No.6944-1/3 SBS805 Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage Forward Voltage VR VF1 IR=1mA IF=0.5A VF2 IR IF=1A VR=15V C VR=10V, f=1MHz Reverse Current Interterminal Capacitance Reverse Recovery Time trr Rth(j-a) Thermal Resistance Ratings Conditions min typ Unit max 30 V 0.35 0.40 0.42 0.47 V 500 µA 35 IF=IR=100mA, See specified Test Circuit. Mounted on a ceramic board (600mm2✕0.8mm) V pF 15 ns °C/W 110 trr Test Circuit 100Ω 10Ω 100mA 50Ω 10µs 10mA 100mA Duty≤10% 5V trr IF -- VF 10 Reverse Current, IR -- mA 1.0 7 5 3 2 Ta= 100 125°C ° 75° C C 50° C 25° C 3 2 0.01 0 0.1 0.3 0.4 Average Forward Power Dissipation, PF(AV) -- W 0.9 0.8 (2) (4) (3) 0.5 Rectangular wave 0.4 θ 0.3 360° 0.2 Sine wave 0.1 0.4 50°C 25°C 0.1 7 5 3 2 0 0.6 5 10 15 20 25 Reverse Voltage, VR -- V 0.8 180° 360° 1.0 Average Forward Current, IO -- A 30 IT00628 C -- VR 1000 (1) 0.2 75°C 1.0 7 5 3 2 f=1MHz 7 5 0.7 0 0 100°C IT00627 PF(AV) -- IO (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 0.6 10 7 5 3 2 0.6 0.5 Forward Voltage, VF -- V 1.0 5°C Ta=12 0.01 0.2 Interterminal Capacitance, C -- pF Forward Current, IF -- A 3 2 0.1 7 5 IR -- VR 100 7 5 3 2 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.2 1.4 IT00629 1.0 1.0 2 3 5 7 10 2 Reverse Voltage, VR -- V 3 5 7 100 IT00630 No.6944-2/3 SBS805 IS -- t Surge Forward Current, IFSM(Peak) -- A 12 Current waveform 50Hz sine wave Is 10 20ms t 8 6 4 2 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 IT00631 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2001. Specifications and information herein are subject to change without notice. PS No.6944-3/3