Ordering number : ENN7291 SBE805 Silicon Schottky Barrier Diode SBE805 30V, 500mA Rectifier Features [SBE805] 2.9 4 0.15 0.2 5 3 0.05 0.6 • unit : mm 1294 0.6 • Low forward voltage (VF max=0.55V). Fast reverse recovery time (trr max=10ns). Composite type with 2 diodes contained in the CPH package currently in use, improving the mounting efficiency greatly. The chips incorporated are both equivalent to the SB05-03C. 2.8 • Package Dimensions 1.6 • 1 2 0.4 1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode 0.9 0.7 0.2 0.95 0.4 Specifications SANYO : CPH5 Absolute Maximum Ratings at Ta=25°C (Value per element) Parameter Symbol Conditions Ratings Unit Repetitive Peak Reverse Voltage VRRM 30 V Non-repetitive Peak Reverse Surge Voltage VRSM IO 35 V 500 mA Average Output Current Surge Forward Current Junction Temperature IFSM Tj Storage Temperature Tstg 50Hz sine wave, 1 cycle 5 A --55 to +125 °C --55 to +125 °C Electrical Characteristics at Ta=25°C (Value per element) Parameter Symbol Reverse Voltage VR Forward Voltage VF Reverse Current IR C Interterminal Capacitance Reverse Recovery Time Thermal Resistance trr Rth(j-a) Conditions IR=150µA IF=500mA VR=15V Ratings min typ max 30 VR=10V, f=1MHz IF=IR=100mA, see specified Test Circuit. Unit V 0.55 V 30 µA 16 pF 10 300 ns °C / W Marking : SE Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O1002 TS IM TA-3609 No.7291-1/3 SBE805 Electrical Connection 3 1 2 10µs 50Ω 100Ω 10Ω 10mA 100mA Duty≤10% 1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode 100mA 4 5 trr Test Circuit (Top view) 5V IF -- VF 2 trr IR -- VR 2 Reverse Current, IR -- µA 3 125 °C 75° C 25° C 0.1 7 5 3 2 --25° C 2 2 100°C 100 5 75°C 2 10 50°C 5 2 25°C 1.0 5 0.01 2 7 5 0.1 5 2 3 0 0.1 0.2 0.3 0.4 0.5 0.6 Forward Voltage, VF -- V 0 0.7 10 7 5 3 2 10 7 5 20 25 30 35 ITR10728 IS -- t 7 Current waveform 50Hz sine wave Surge Forward Current, IS(Peak) -- A 100 15 Reverse Voltage, VR -- V f=1MHz 3 7 5 ITR10727 C -- VR 2 Interterminal Capacitance, C -- pF Ta=125°C 5 Ta= Forward Current, IF -- A 1000 1.0 7 5 6 IS 20ms t 5 4 3 2 1 0 1.0 2 3 5 7 10 2 Reverse Voltage, VR -- V 3 5 7 100 ITR10729 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ITR10730 No.7291-2/3 SBE805 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2002. Specifications and information herein are subject to change without notice. PS No.7291-3/3