Sharma Film Capacitors formerly SAHA MKT 050 SERIES Formerly MKT 1.85 series INTRODUCTION The MKT 050 Series Metallized Polyester Film Capacitors are miniature capacitors with 5 mm lead spacing. This series covers a wide range of values and voltages and exhibit excellent high frequency characteristics. In addition to specific applications such as Blocking, Bypassing and Coupling, this series is widely used in all General Purpose applications. FEATURES value and Voltage range • Wide miniature size • Ultra retardant case and potting • Flame dimensions and surface finish due to molded case construction • Consistent in tape & reel form for automatic insertion • Available • Self healing capability DIMENSIONS AND TOLERANCES: "d"= 0.5 to 0.6mm (0.020 to 0.024") for dimension “T”≤ 3.5mm (0.138”) "d"= 0.6 mm (0.024") for dimension “T” >3.5mm (0.138”) "LL'' = 4.0 +1.5mm (0.16 +0.06") for Bulk Supply PULSE RISE TIME (dv/dt) Volts per µsec. GENERAL SPECIFICATIONS: Dissipation factor: For capacitance ≤ 0.1 µF = 0.010 max at 1 KHz, 0.015 max at 10 KHz, 0.030 max at 100 KHz. For capacitance > 0.1 µF = 0.0010 max at 1 KHz, 0.0015 max at 10 KHz. Insulation resistance: For nominal voltage < 100 V DC; ≥10,000 M Ohms for C ≤ 0.10 µF, ≥1,000 seconds for C > 0.10 µF. For nominal voltage ≤ 100 V DC; ≥ 30,000 M Ohms for C ≤ 0.10 µF, ≥1,000 seconds for C> 0.10 µF at a temperature of 25 ± 5 °C. Capacitance tolerance: ±5%(J), ±10%(K) and ±20%(M) Voltage Test: 1.6 times the rated voltage applied between terminals for 2 seconds at a temperature of 25 ± 5 °C Temperature range: -55 to 100 °C with derating above 85 °C Climatic category: F M D RATED Capacitance dv/dt VOLTAGE RangeµF value 50 63 0.001-1.0 0.001-1.0 4 8 100 >0.0068 10 100 0.0033-0.0068 15 100 >0.0033 30 250 400 0.001-1.0 0.001-1.0 20 40 LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. Capacitance change shall remain within ±5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. Taping Dimensions for MKT 050 Series (5mm Pitch) DESCRIPTION d Lead wire dia. P Tapingpitch P0 Sprocketholepitch P1 Centering of lead wire P2 Centering of the body p Lead spacing dS Component alignment H Height from Sproket Center to component body W Tape width W 0 Width of adhesive tape W 1 Sprocket hole alignment D0 Positionholediameter t Tape thickness DIMENSION TOLERANCES mm Inches mm Inches 0.5 to 0.6 0.020 to 0.024 ±0.05 ±0.002 12.7 0.500 ±1 ±0.039 12.7 0.500 ±0.2 ±0.008 3.85 0.152 ±0.7 ±0.028 6.35 0.250 ±1.3 ±0.051 5 0.197 +0.6/ -1.1 +0.024/ -0.043 0 0.000 ±2 ±0.079 16.0, 16.5 0.630, 0.650 ±0.5 ±0.020 or 18.5 or 0.728 18 0.709 +1.0/ -0.5 +0.039/ -0.020 6 min. 0.236 min. 9 0.354 ±0.5 ±0.020 4 0.157 ±0.2 ±0.008 0.7 0.028 ±0.2 ±0.008 TEL:(949)642-SECI Packaging Specifications Bulk, Tape/Reel & Ammo Pack BOX SIZE T x H x L 2.5 x 6.5 x 7.2 3.0 x 6.5 x 7.2 3.5 x 7.5 x 7.2 4.5 x 9.5 x 7.2 5.0 x 10.0 x 7.2 6.0 x 11.0 x 7.2 7.2 x 13.0 x 7.2 SECI Engineers & Buyers' Guide BULK CARTON 3000 3000 2000 1500 1000 2000 1500 TAPED REEL PACK AMMO PACK 2500 3500 2100 2900 1800 2500 1400 1900 1200 NA 1000 NA 800 NA FAX:(949)642-7327 Sharma Film Capacitors formerly SAHA MKT 050 SERIES CASE DIMENSIONS Case Dimensions in Millimeters 50V • 63V • 100V • 250V • 400V Voltage 50 V DC / 30 V AC 63 V DC / 40 V AC 100 V DC / 63 V AC 250 V DC / 160 V AC Cap Value Dimensions in MM Dimensions in MM Dimensions in MM DIMENSIONS IN MM in µF 0.001 L H T S L H T S L H T S 400 V DC / 200 V AC DIMENSIONS IN MM L 7.2 H 6.5 T 2.5 S 5.0 L 7.2 H 6.5 T 2.5 S 5.0 0.0015 7.2 6.5 2.5 0.0022 0.0033 7.2 7.2 6.5 6.5 2.5 2.5 5.0 7.2 6.5 2.5 5.0 5.0 5.0 7.2 7.2 6.5 6.5 2.5 2.5 5.0 5.0 0.0047 7.2 6.5 2.5 5.0 7.2 6.5 2.5 5.0 0.0068 7.2 6.5 2.5 5.0 7.2 6.5 2.5 5.0 7.2 6.5 3.0 5.0 0.01 0.015 7.2 7.2 6.5 6.5 2.5 2.5 5.0 5.0 7.2 7.2 6.5 6.5 2.5 2.5 5.0 5.0 7.2 7.2 7.5 9.5 3.5 4.5 5.0 5.0 0.022 0.033 7.2 7.2 6.5 6.5 2.5 2.5 5.0 5.0 7.2 7.2 6.5 7.5 3.0 3.5 5.0 5.0 7.2 7.2 9.5 10.0 4.5 5.0 5.0 5.0 7.2 11.0 6.0 5.0 0.047 7.2 6.5 2.5 5.0 7.2 6.5 3.0 5.0 7.2 9.5 4.5 5.0 0.068 7.2 6.5 2.5 5.0 7.2 7.5 3.5 5.0 7.2 9.5 4.5 5.0 0.1 0.15 7.2 7.2 6.5 6.5 2.5 3.0 5.0 5.0 7.2 7.2 6.5 7.5 2.5 3.5 5.0 5.0 7.2 7.2 9.5 10.0 4.5 5.0 5.0 5.0 7.2 7.2 11.0 13.0 6.0 7.2 5.0 5.0 0.22 0.33 0.47 7.2 7.2 7.2 7.5 7.5 9.5 3.5 3.5 4.5 5.0 5.0 5.0 7.2 7.2 7.2 7.5 9.5 10.0 3.5 4.5 5.0 5.0 5.0 5.0 7.2 11.0 6.0 5.0 7.2 13.0 7.2 5.0 0.68 1.0 7.2 7.2 10.0 11.0 5.0 6.0 5.0 5.0 7.2 11.0 6.0 5.0 Case Dimensions in Inches 50V • 63V • 100V • 250V • 400V Voltage 50 V DC / 30 V AC 63 V DC / 40 V AC 100 V DC / 63 V AC 250 V DC / 160 V AC 400 V DC / 200 V AC Cap Value in µF DimensionsinInches L H T S DimensionsinInches L H T S DimensionsinInches L H T S DimensionsinInches L H T S DimensionsinInches L H T S 0.001 0.0015 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.0022 0.0033 0.0047 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.0068 0.01 0.015 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.118 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.295 0.138 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.374 0.177 0.197 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.256 0.256 0.295 0.295 0.374 0.394 0.433 0.098 0.118 0.138 0.138 0.177 0.197 0.236 0.197 0.197 0.197 0.197 0.197 0.197 0.197 TEL:(949)642-SECI 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.256 0.256 0.256 0.295 0.295 0.374 0.394 0.433 0.098 0.098 0.098 0.138 0.138 0.177 0.197 0.236 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.256 0.256 0.256 0.295 0.374 0.394 0.433 0.098 0.098 0.118 0.138 0.177 0.197 0.236 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.256 0.295 0.374 0.374 0.433 0.512 0.512 SECI Engineers & Buyers' Guide 0.118 0.138 0.177 0.177 0.236 0.283 0.283 0.197 0.283 0.374 0.177 0.197 0.197 0.283 0.394 0.197 0.197 0.197 0.283 0.433 0.236 0.197 0.197 0.197 0.197 0.197 FAX:(949)642-7327