Sharma Film Capacitors formerly SAHA MKT 075 SERIES Formerly MKT 1.67 series DIMENSIONS AND TOLERANCES: INTRODUCTION: The MKT 075 Series Metallized Polyester Film Capacitors are specially designed for use in thickly populated Printed Circuit Boards where miniaturization is important. These capacitors are widely used in all General Purpose applications. "d" - 0.6 mm (0.024") for dimension “T” = 4mm (0.160”) "d" - 0.8 mm (0.032") for dimension "T" > 4mm (0.160") "LL'' - 6.0 ± 1.0mm (0.24 ± 0.04") Tolerance on "s" ± 0.4mm (0.016") FEATURES: Wide value and Voltage range Flame retardant case and potting Consistent dimensions and surface finish due to molded case construction Self healing capability • • • • GENERAL SPECIFICATIONS: Dissipation factor: ≤ 0.015 at 10 K Hz for capacitance< 1.0 µF Insulation resistance: For nominal voltag e≤ 100 V DC, ≥10,000 M Ohm for C≤ 0.1µF, ≥1,000 seconds for C> 0.1 µF, For nominal voltage > 100 V DC ≥30,000 , M Ohm for C≤ 0.33µF, ≥10,000 seconds for C> 0.33 µF.Capacitance tolerance: ±5%(J), ±10%(K)and ±10%(M) Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at temperature of 25 ± 5 °C Temperature range: -55 to 100 °C with derating above 85 °C Climatic category: F M D PULSE RISE TIME (dv/dt) RATED dv/dt - VOLTAGE LIFE TEST DETAILS: Volts per µsec. per µ VoltsSeconds 100 6 250 15 400 30 630 40 Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. 2. 3. 4. Capacitance change shall remain within ±5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible. MKT 075 SERIES Case Dimensions Case Dimensions in Inches 100V • 250V Case Dimensions in Millimeters100V • 250V VOLTAGE 100 V DC / 63 V AC Capacitance in µF Dimensions in Millimeters L 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 H 10.5 10.5 10.5 10.5 10.5 10.5 10.5 µF 4.0 4.0 4.0 4.0 4.0 5.0 6.0 S 7.5 7.5 7.5 7.5 7.5 7.5 7.5 Dimensions in Millimeters L H T S 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 9.0 9.0 9.0 9.0 9.0 11.0 11.0 12.0 4.0 4.0 4.0 4.0 4.0 5.0 5.0 6.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 DC/AC 630 V DC / 250 V AC Dimensions in Millimeters L 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 9.0 9.0 9.0 9.0 9.0 11.0 12.0 T VOLTAGE 400 V DC / 200 V AC Capacitance in DC/AC 250 V DC / 160 V AC 10.5 10.5 10.5 10.5 10.5 10.5 H 9.0 9.0 9.0 9.0 11.0 12.0 T 4.0 4.0 4.0 4.0 5.0 6.0 S 7.5 7.5 7.5 7.5 7.5 7.5 Tel:(949)642-SECI Dimensions in Millimeters L H T S 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 9.0 9.0 9.0 9.0 9.0 9.0 11.0 12.0 4.0 4.0 4.0 4.0 4.0 4.0 5.0 6.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 VOLTAGE 100 V DC / 63 V AC Capacitance in µF Dimensions in Inches L 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 H 0.413 0.413 0.413 0.413 0.413 0.413 0.413 µF 0.157 0.157 0.157 0.157 0.157 0.197 0.236 Dimensions in Inches S 0.295 0.295 0.295 0.295 0.295 0.295 0.295 L H T S 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.354 0.354 0.354 0.354 0.354 0.433 0.433 0.472 0.157 0.157 0.157 0.157 0.157 0.197 0.197 0.236 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 DC/AC 630 V DC / 250 V AC Dimensions in Inches L 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.354 0.354 0.354 0.354 0.354 0.433 0.472 T VOLTAGE 400 V DC / 200 V AC Capacitance in DC/AC 250 V DC / 160 V AC 0.413 0.413 0.413 0.413 0.413 0.413 H 0.354 0.354 0.354 0.354 0.433 0.472 SECI Engineers & Buyers' Guide T 0.157 0.157 0.157 0.157 0.197 0.236 Dimensions in Inches S 0.295 0.295 0.295 0.295 0.295 0.295 L H T S 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.354 0.354 0.354 0.354 0.354 0.354 0.433 0.472 0.157 0.157 0.157 0.157 0.157 0.157 0.197 0.236 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 Fax:(949)642-7327