CFA0207 Vishay Draloric Carbon Film Resistors, Standard FEATURES • Conformal lacquer coating • Stable film structure • Low performance and low cost applications • General purpose commodity products • Compatible with automatic insertion equipment STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE CFA0207 POWER RATING LIMITING ELEMENT 0207 TEMPERATURE TOLERANCE P70°C W VOLTAGE MAX V쓖 COEFFICIENT ppm/K % 0.33 250 + 350/- 1500 5 • Coating: beige RESISTANCE E-SERIES RANGE Ω 1R0 - 10M 24 • Marking: 4 band colour code TECHNICAL SPECIFICATIONS PARAMETER UNIT CFA0207 Rated Dissipation at 70°C W 0.33 Limiting Element Voltage 1) V쓖 ≤ 250 Insulation voltage (1 min) Veff > 500 K/W ≤ 257 Insulation Resistance Ω ≥ 109 Category Temperature Range °C - 55/+ 155 Terminal Strength, axial N > 25 Thermal Resistance Failure Rate -9 10 /h < 10 g 0.21 Weight 1)Rated voltage: PxR PACKAGING REEL 2) MODEL CODE 5000 R5 CFA0207 2)On MIN. ORDER QTY PIECES/REEL BOX PACKAGING UNITS PIECES/BOX 1 5000 MIN. ORDER QTY CODE PACKAGING UNITS A5 1 special request only ORDERING INFORMATION CFA0207 1K8 ± 5% A5 MODEL RESISTANCE VALUE TOLERANCE PACKAGING Ω % A5-Ammopack 5000 pcs Document Number 21022 Revision 05-Jun-03 For Technical Questions, contact: [email protected] www.vishay.com 1 CFA0207 Vishay Draloric Carbon Film Resistors, Standard DIMENSIONS MODEL 6 mm* L1 L D CFA0207 d DIMENSIONS [in millimeters] D max L max L1 max B d e 2.5 6.5 7.5 53 ± 1 0.6 7.5 • Taping in accordance with IEC60286-1 • D and L measured in accordance with IEC60294 • d in accordance with IEC60301 Rated Power (%) Temperature rise (°C) e B 150 100 120 100 80 60 50 40 20 0 0 0.2 0.4 0.6 TEMPERATURE RISE 0 -55 0.8 Power (W) -25 0 25 DERATING 50 75 70 100 125 155 Ambient Temperature (°C) PERFORMANCE 1) REQUIREMENTS 1) TEST CONDITIONS OF TEST Endurance Test at 70°C IEC 60115-1 4.25.1 1000 hours at 70°C, 1.5 hours “ON”, 0.5 hours “OFF” ≤ ± 3.0% Endurance at UCT IEC 60115-1 4.25.3 1000 hours at 155°C without load ≤ ± 3.0% Overload Test IEC 60115-1 4.13 Short time overload 5s at 2.5 x rated voltage or ≤ twice the limiting element voltage ≤ ± 0.75% Thermal Shock IEC 60115-1 4.19, IEC 60068-2-14 Rapid change between upper and lower category temperature ≤ ± 0.5% Climatic Sequence IEC 60115-1 4.23 Dry heat, damp heat cyclic, cold, low air pressure ≤ ± 1.5% Damp Heat Steady State IEC 60115-1 4.24, IEC 60068-2-3 56 days at 40°C and 93% relative humidity ≤ ± 3.0% Resistance to Soldering Heat IEC 60115-1 4.18, IEC 60068-2-20 10 seconds at 260°C solder bath temperature ≤ ± 1.0% Robustness of Terminations IEC 60115-1 4.16 Tensile, bending and torsion ≤ ± 0.25% Vibration IEC 60115-1 4.22 0.75mm or 10g, 10Hz - 500Hz 6 hours ≤ ± 0.25% For ohmic values between 10R and 1M APPLICABLE SPECIFICATIONS CECC40000/40100/EN 140000/IEC 60115-1 www.vishay.com 2 For Technical Questions, contact: [email protected] Document Number 21022 Revision 05-Jun-03