MC1403 2.5V PRECISION SERIAL VOLTAGE REFERENCE ■ ■ ■ ■ OUTPUT VOLTAGE : 2.5V ±1% INPUT VOLTAGE RANGE : 4.5V to 40V QUIESCENT CURRENT : 1.2mA typ. OUTPUT CURRENT : 10mA DESCRIPTION The MC1403 is a serial 2.5V bandgap voltage reference. The major advantages are the 1% precision, the wide input voltage range (4.5V to 40V) and the low quiescent current (1.5mA max.) D SO8 (Plastic Micropackage) ORDER CODE Part Number MC1403 Package Temperature Range D • 0°C, +70°C D = Small Outline Package (SO) - also available in Tape & Reel (DT) PIN CONNECTIONS (top view) 8 7 6 5 Vref 1 - Vin 2 - Vout 3 - GND 4 - N.C. 5 - N.C. 6 - N.C. 7 - N.C. 8 - N.C. 1 February 2002 2 3 4 1/3 MC1403 ABSOLUTE MAXIMUM RATINGS Symbol Parameter VIN Input Voltage Tstg Storage Temperature Range Value Unit 40 V -65 to +150 °C Value Unit Input Voltage (IOUT =0mA) 4.5 to 40 V Operating Free Air Temperature Range 0 to +70 °C OPERATING CONDITIONS Symbol VIN Toper Parameter ELECTRICAL CHARACTERISTICS Tamb = 25°C, VIN =15V (unless otherwise specified) Symbol VOUT ∆ Vout -----------------∆T Parameter Min. Typ. Max. 2.475 2.5 2.525 10 40 2 7 V Output Voltage IOUT = 0mA Temperature Coefficient of Output Voltage IOUT = 0mA ppm/°C ∆VOUT Output Voltage change Over the Full Temperature Range Reg line Line regulation IOUT = 0mA, 4.5V ≤Vi ≤15V IOUT = 0mA, 15V ≤V i ≤40V 3 4.5 Reg Load Regulation 0 ≤ IOUT ≤ 10mA 10 IQ 2/3 load IOUT = 0mA Quiescent Current IOUT = 0mA Unit mV mV 1.2 1.5 mV mA MC1403 PACKAGE MECHANICAL DATA 8 PINS - PLASTIC MICROPACKAGE (SO) s b1 b a1 A a2 C c1 a3 L E e3 D M 5 1 4 F 8 Millimeters Inches Dimensions Min. A a1 a2 a3 b b1 C c1 D E e e3 F L M S Typ. Max. 0.65 0.35 0.19 0.25 1.75 0.25 1.65 0.85 0.48 0.25 0.5 4.8 5.8 5.0 6.2 0.1 Min. Typ. Max. 0.026 0.014 0.007 0.010 0.069 0.010 0.065 0.033 0.019 0.010 0.020 0.189 0.228 0.197 0.244 0.004 45° (typ.) 1.27 3.81 3.8 0.4 0.050 0.150 4.0 1.27 0.6 0.150 0.016 0.157 0.050 0.024 8° (max.) Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States © http://www.st.com 3/3