STMICROELECTRONICS ST7F264

®
ST7C254-INDART, ST7C334-INDART, ST7F264-INDART,
ST7F521-INDART, ST7FLIT0-INDART, ST7FLIT2-INDART
In-Circuit Debugging and In-Circuit Programming Tool for ST7
DATA BRIEF
The inDart-ST7 is a powerful, low-cost In-Circuit
Debugging (ICD) and In-Circuit Programming (ICP)
tool, developed for ST7 in partnership with Softec
Microsystems (www.softecmicro.com).
The inDART-ST7 takes advantage of the ST7
Visual Develop (STVD7) Integrated Development
Environment and ST7 In-Circuit Communication
(ICC) capability to deliver ICD and ICP for a wide
range of ST7 Flash microcontrollers. Hardware and
software debugging features include real-time code
execution, stepping and breakpoints.
InDart-ST7 offers parallel or USB connection to the
host PC, depending on the model, and 10-pin ICC
connection for connecting to evaluation or application board
Figure 1: InDart-ST7
In-circuit debugging features:
●
Source level and symbolic debugging
●
Unlimited instruction breakpoints
●
Execution control including instruction stepping
●
Advanced breakpoints on data, access type,
access range, stack...(depending on model)
●
Watch variables, registers and peripherals
inDART Kit Contents
In-circuit programming features:
●
●
inDART ICC interface board to connect the host
PC to an evaluation or application board
●
Evaluation board that includes an ST7 (except
for the STXF-InDART)
●
inDART edition of the STVD7 integrated
development environment
Blank Check/Erase/Read/Verify for Flash,
EEPROM memory and option bytes
Microcontroller
InDART
Advanced
breakpoints
Real time
All ST7 Flash MCUs
STXF-INDART/USB
Yes 1
Yes 2
ST7FLITE0x
ST7FLIT0-IND/USB
Yes 1
Yes 2
Yes (ST7FLite09 – DIP16)
USB
ST7FLITE2x
ST7FLIT2-IND/USB
Yes
1
Yes
2
Yes (ST7FLite29 – DIP16)
USB
ST72F264
ST7F264-IND/USB
Yes
1
Yes
2
Yes (ST7F2649 – SDIP32)
USB
ST72F521
ST7F521-IND/USB
Yes
1
Yes
2
ST72C104
ST72C215
ST72C216
ST72C254
ST7C254-INDART
Yes
Yes (ST7C254 – SDIP32)
Parallel
ST72C124
ST72C314
ST72C334
ST7C334-INDART
Yes
Yes (ST7C334 – DIP56)
Parallel
ST7FLITE0x
ST7FLITE0-INDART
Yes
Yes (ST7FLite09 – DIP16)
Parallel
ST72F26x
ST7F264-INDART
Yes
Yes (ST7F264 – SDIP32)
Parallel
1
Host PC
connection
USB
Yes (ST7F521 – TQFP64)
3
Advanced breakpoints only for MCUs with on-chip debug module
2 Real
Evaluation board
(MCU)
3
USB
This evaluation board also supports ST72F32x
time, with breakpoint limitation for MCUs without on chip debug modules
February 2005
Version 1.0
1/2
INDART
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are
subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products
are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics.
All other names are the property of their respective owners
© 2005 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
2/2