STMICROELECTRONICS ST72C254G2M6

INDART, STXF-INDART/USB
ST7FLIT0-IND/USB, ST7C334-INDART
In-circuit debugging and in-circuit programming tool for ST7
Data brief
Features
■
In-circuit debugging features:
– Source level and symbolic debugging
– Unlimited instruction breakpoints
– Execution control including instruction
stepping
– Advanced breakpoints on data, access
type, access range, stack...(depending on
model)
– Watch variables, registers and peripherals
■
In-circuit programming features: Blank
check/erase/read/verify for Flash EEPROM
memory and option bytes
The inDART kit contains:
Description
■
inDART ICC interface board to connect the
host PC to an evaluation or application board
The inDART is a powerful, low-cost in-circuit
debugging (ICD) and in-circuit programming (ICP)
tool, developed for ST7 in partnership with Softec
Microsystems™.
■
Evaluation board that includes an ST7 (except
for the STXF-INDART)
■
inDART edition of the STVD7 integrated
development environment:
The inDART takes advantage of the ST7 Visual
Develop (STVD7) integrated development
environment and ST7 in-circuit communication
(ICC) capability to deliver ICD and ICP for a wide
range of ST7 Flash microcontrollers.
Hardware and software debugging features
include real-time code execution, stepping and
breakpoints.
The inDART offers parallel or USB connection to
the host PC, depending on the model, and 10-pin
ICC connection for connecting to evaluation or
application board.
May 2011
Table 1.
inDART order code
Microcontroller
STXF-INDART/USB
All ST7 Flash MCUs
ST7FLIT0-IND/USB
ST7FLITE0x
see www.smh-tech.com
ST7FLITE2x
see www.smh-tech.com
ST72F264
see www.smh-tech.com
ST72F521
see www.smh-tech.com
ST72C104
ST72C215
ST72C216
ST72C254
ST7C334-INDART
ST72C124
ST72C314
ST72C334
see www.smh-tech.com
ST7FLITE0x
see www.smh-tech.com
ST72F26x
Doc ID 11211 Rev 3
For further information contact your local STMicroelectronics sales office.
Device summary
1/3
www.st.com
3
Ordering information
INDART, STXF-INDART/USB, ST7FLIT0-IND/USB, ST7C334-INDART
Ordering information
InDART starter kits can be ordered from Softec Microsystems™ or from your nearest ST distributor or
sales office. Use the following table to determine which inDART MCU is best adapted to your
requirements.
Table 2.
InDART details
Microcontroller
Order code
Advanced
Real time
breakpoints
Evaluation board (MCU)
Host PC
connection
All ST7 Flash
MCUs
STXF-INDART/USB
Yes(1)
Yes(2)
ST7FLITE0x
ST7FLIT0-IND/USB
Yes(1)
Yes(2)
Yes (ST7FLite09 – DIP16)
USB
(1)
Yes (ST7FLite29 – DIP16)
USB
Yes (ST7F2649 – SDIP32)
USB
USB
ST7FLITE2x
see www.smh-tech.com
Yes
Yes(2)
ST72F264
see www.smh-tech.com
Yes(1)
Yes(2)
ST72F521
see www.smh-tech.com
(1)
Yes(2)
ST72C104
ST72C215
ST72C216
ST72C254
see www.smh-tech.com
Yes
Yes (ST7C254 – SDIP32)
Parallel
ST72C124
ST72C314
ST72C334
ST7C334-INDART
Yes
Yes (ST7C334 – DIP56)
Parallel
ST7FLITE0x
see www.smh-tech.com
Yes
Yes (ST7FLite09 – DIP16)
Parallel
ST72F26x
see www.smh-tech.com
Yes
Yes (ST7F264 – SDIP32)
Parallel
Yes
Yes (ST7F521 –
TQFP64)(3)
USB
1. Advanced breakpoints only for MCUs with on-chip debug module
2. Real time, with breakpoint limitation for MCUs without on chip debug modules
3. This evaluation board also supports ST72F32x
For more information and documentation, please refer to the Softec Microsystems™ web site or the
STMicroelectronics microcontroller support site on www.st.com.
Revision history
Table 3.
Document revision history
Date
Revision
01-Feb-2005
1
Initial release.
30-Mar-2009
2
Modified references to inDart-ST7 to inDART, in line with product family name.
30-May-2011
3
Modified Table 1: Device summary and Table 2: InDART details.
Added INDART to root part number list.
2/3
Changes
Doc ID 11211 Rev 3
INDART, STXF-INDART/USB, ST7FLIT0-IND/USB, ST7C334-INDART
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 11211 Rev 3
3/3