TDE0160 Proximity Detectors Features ■ Supply Voltage +4 to +36V ■ Supply Current < 1.2mA ■ Loss Resistance 5 to 50kΩ ■ Oscillator Frequency < 1MHz ■ Output Transistors I = 20mA, VCE(sat) ≤ 1.1V SO14 Description The TDE0160 is designed to detect metal bodies by the effect of Eddy currents on the HF losses of a coil. It has two complementary open collector outputs with peak limiting. Hysteresis is adjustable, and an electronic switching circuit is incorporated for disabling both outputs. An internal zener diode maintains the supply voltage to the circuit in “dipole“ operation. Schematic Diagram November 2005 Rev 2 1/18 www.st.com 18 TDE0160 Contents 1 Internal schematic diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Operating Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Typical Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5 Package Mechanical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/18 TDE0160 1 Figure 1. 1 Internal schematic diagram Internal schematic diagram Pin connection diagram (top view) 3/18 TDE0160 2 Electrical ratings 2 Electrical ratings Table 1. Absolute maximum ratings Symbol Parameter Value Unit VCC Supply Voltage 36 V VO Output Voltage (1) 36 V Output Current (I1 - I3) 40 mA IZ Zener Current 40 mA TJ Junction Temperature +150 °C IO (I1 - I3) Toper Ambient Temperature Range –25 to 85 °C Tstg Storage Temperature Range –65 to 150 °C 1. Internal peak limiting to protect against transient voltage surges. 2.1 Electrical characteristics Tamb = +25°C, unless otherwise specified. Table 2. Symbol Electrical Characteristcs Parameter VCC Supply Voltage Test conditions Min. 11 4 9 - 11 3 Typ. VZ Zener Voltage ICC Supply Current VLIM Limiting I = 0.1mA 1 or 3 42 VSAT Output Transistor Saturation Voltage I1 or I3 = +20mA 1 or 3 0.9 ILEAK Output Transistor Leakage Current V = +30V 1 or 3 VTH Switching Threshold Rn Negative Resistance IZ = 20mA Pin 11 12 (2) 90 5kΩ < RH < 50kΩ, 110 Max. Unit 36 V 4 V 1.2 mA V 1.1 V 2 µA 130 mV 2 % Rn = RH f = 100kHz, RS = 0 HYST Inherent Hysteresis R2 = 0 1 PHYST Programmed Hysteresis H < 15% Rs fOSC Oscillation Frequency FSW Switching Frequency TD Switching Time-delay TRE Switching Response Time % Rs + RH 1 (with matched oscillator circuit) MHz 750 Hz 0.5Cd s (µF) Note: 4/18 2. See Characteristics Curves Cd = 10nF, V CC = +20V 10 µs TDE0160 3 3 Operating Mode Operating Mode If IC exceeds ICO = V(ref) / R d the switch cuts off the output transistor and tests the value of current IC, with time costant 0.5C d On power up the internal start system cuts off the output transistors until VCC reaches a value permitting normal operation of the circuit. Figure 2. Switching Operation 5/18 TDE0160 3 Operating Mode Figure 3. Negative resistence vs Frequency Figure 4. Zener voltage vs Junction Temp. Figure 5. Switching threshold vs Junction temperature Figure 6. Negative resistance vs Junction temperature 6/18 TDE0160 3 Operating Mode Figure 7. Loss resistance vs Detection Range Figure 8. MILD Steel 7/18 TDE0160 4 Typical Applications 4 Table 3. 8/18 Typical Applications Component Values (see figures 9, 10, 11) Symbol Value Unit CA 10 nF Cf 1 nF Cd 10 nF CO 390 pF LO 65µH to 1MHz Rd 10 kΩ RH 15 kΩ RS 3 kΩ RL 2.5 kΩ VCC 20 V fO ~1 MHz emean 2.5 mm Φ coil 14 mm Core COFELEC 432FP Straded wire 15 x 5/100 TDE0160 Figure 9. 4 Typical Applications Application Scheme (A) 9/18 TDE0160 Figure 10. Application Scheme (B) 10/18 TDE0160 4 Typical Applications Figure 11. Application Scheme (C) 11/18 TDE0160 5 Package Mechanical Data 5 Package Mechanical Data Table 4. SO14 Mechanical Data mm. inch Dim. MIN. MAX. MIN. TYP. MAX. A 1.35 1.75 0.053 0.069 A1 0.1 0.25 0.004 0.010 A2 1.10 1.65 0.043 0.065 B 0.33 0.51 0.013 0.020 C 0.19 0.25 0.007 0.010 D 8.55 8.75 0.337 0.344 E 3.8 4.0 0.150 0.157 e 1.27 0.050 H 5.8 6.2 0.228 0.244 h 0.25 0.50 0.010 0.020 L 0.4 1.27 0.016 0.050 k 0° 8° 0° 8° ddd Figure 12. Package Dimension 12/18 TYP 0.100 0.004 TDE0160 Table 5. 5 Package Mechanical Data Tube Shipment Information Tube Mechanical Data mm. inch. A 6.60 ±0.10 0.260 ±0.004 B 1.90 ±0.10 0.075 ±0.004 C 0.60 ±0.10 0.024 ±0.004 D 7.80 ±0.10 0.307 ±0.004 E 4.30 ±0.10 0.169 ±0.004 BASE QUANTITY 100 pcs. BULK QUANTITY 2000 pcs. Figure 13. Tube Dimension 13/18 TDE0160 5 Package Mechanical Data Table 6. Tape & Reel Shipment Information TAPE MECHANICAL DATA mm. inch D 1.50 +0.1/0 0.059 +0.004/0 E 1.75 ±0.1 0.069 ±0.004 Po 4.00 ±0.1 0.157 ±0.004 T max. 0.40 0.016 D1 min. 1.50 0.059 F 7.5 ±0.05 0.295 ±0.002 K max. 6.50 0.256 P2 2.00 ±0.05 0.079 ±0.002 R 40 1.575 W 16.00 ±0.30 0.630 ±0.012 P1 12.00 0.472 Ao, Bo, Ko 0.05 min to 0.90 max. 0.002 min to 0.035 max. Figure 14. Tape Specification 14/18 TDE0160 Table 7. 5 Package Mechanical Data Reel Mechanical Data mm. inch Tape size 16.0 ±0.30 0.630 ±0.012 A max. 330.0 12.992 B min. 1.5 0.059 C 13.0 ±0.20 0.512 ±0.008 D min. 20.2 0.795 N min. 60 2.362 G 16.4 +2/-0 0.646 +0.079/-0 T max. 22.4 0.882 Figure 15. Tape & Reel Shipment Information 15/18 TDE0160 6 Order codes 6 16/18 Order codes Part number Temp range Package Packing TDE0160FP 150°C SO14 Tube TDE0160FPT 150°C SO14 Tape and Reel TDE0160 7 7 Revision history Revision history Date Revision 18-Nov-2005 2 Changes Final release. 17/18 TDE0160 7 Revision history Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18