LAN Transformer< SMD Type: CLP Series> Type: CLP236 ◆ Product Description ・23.5mm×11.5mm Max. (L×W),6.9mm Max. Height. ・Pulse transformer + filter module for LAN 10/100 Base-T(IEEE802.3). ・In addition to the typical parameters shown here, custom designs are available. ◆ Feature ・10/100Base-T discrete single port modules. ・Ideally used in LAN and PoE-enabled LAN applications, router, Hub, switch, etc. ・RoHS Compliance. ◆ Dimensions (mm) ◆ Land Pattern (mm) 8 CH SD68515NP-K 1 1 16 5.08 23.5 MAX. 0.55 8 sumida 9 Stamp·Data code 捺印 製造密番 9 0.2 11.2±0.3 16 10-2.54 9.2±0.3 sumida 6.9 MAX. 12.6±0.3 ◆Schematics(Bottom) 10-2.54 RD+ 1 7 RX+ 9 16 1 14-1.02 8 13.72 14-2.54 5 CT RD- 2 6 RX- CT 3 TD- 15 11 TX- CT 14 12 CMT TD+ 16 10 TX+ Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 LAN Transformer< SMD Type: CLP Series> Type: CLP236 ◆ Specification Turns Ratio Part No. RX TX SD68515NP-K 1CT:1CT 1CT:1CT SD68517 1CT:1CT 1CT:1CT SD49783 1CT:1CT 1.4CT:1CT SD1013 1CT:1CT 1.4CT:1CT SD49743 1CT:1CT 2CT:1CT Parameters(SD68515NP-K) SPECIFICATION Inductance (1-2)/(15-16) Insertion Loss Return Loss Common Mode Rejection Cross Talk Hipot (1-2)-(7-6), (15-16)-(11-10) CONDITION (TX) (RX) 350μH Min. 350μH Min. 100kHz,100mV,8mA DC bias -1.0dB Min. -1.0dB Min. 0.1～100MHz -18.0dB Max. -18.0dB Max. 1～30MHz -18.0dB Max. -18.0dB Max. 40MHz -16.0dB Max. -16.0dB Max. 50MHz -12.0dB Max. -12.0dB Max. 60～80MHz -43.0dB Max. -43.0dB Max. 30MHz -43.0dB Max. -43.0dB Max. 60MHz -40.0dB Max. -40.0dB Max. 100MHz -55.0dB TYP. -55.0dB TYP. 30MHz -50.0dB TYP. -50.0dB TYP. 60MHz -50.0dB TYP. -50.0dB TYP. 100MHz AC 1500Vrms 1Minute Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2