LAN Transformer< SMD Type: CLP Series> Type: CLP0712 ◆ Product Description ・13.05mm×9.75mm Max. (L×W),5.8mm Max. Height. ・Pulse transformer + Filter module for LAN 10/100 Base-T(IEEE802.3). ・In addition to the typical parameters shown here, custom designs are available. ◆ Feature ・10/100Base-T discrete single port modules. ・Ideally used in LAN and PoE-enabled LAN applications, router, Hub, switch, etc. ・RoHS Compliance. ◆ Dimensions (mm) Stamp ◆Schematics(Bottom) 7.3 1.5 ◆ Land Pattern (mm) 1.5 0.8 1.27 1.27 1.27 1.27 9.69 Please refer to the sales offices on our website for a representative near you www.sumida.com 1/4 LAN Transformer< SMD Type: CLP Series> Type: CLP0712 ◆ Specification (SAMPLE NO.: 6500-T001) Specification Item Insertion Loss Ｔｘ Ｒｘ 1.0 dB Max 1.0 dB Max 1∼100MHz 17 dB Min 17 dB Min 1∼30MHz 15 dB Min 15 dB Min 40MHz 13 dB Min 13 dB Min 50MHz 12 dB Min 12 dB Min 60∼80MHz 45 dB Min 45 dB Min 30MHz 40 dB Min 40 dB Min 60MHz 35 dB Min 35 dB Min 100MHz 50 dB Min 50 dB Min 30MHz 45 dB Min 45 dB Min 60MHz 40 dB Min 40 dB Min 100MHz 1CT:1CT±5％Within 1CT:1C±5％Within Return Loss Differential to common Mode rejection Cross talk Turns ratio Voltage isolation (1-8)-(9-16) Condition AC 1500 V(50/60Hz) for 2 seconds 0.5mArms Please refer to the sales offices on our website for a representative near you www.sumida.com 2/4 LAN Transformer< SMD Type: CLP Series> Type: CLP0712 ◆ Insertion loss test circuit ◆ Return loss test circuit Please refer to the sales offices on our website for a representative near you www.sumida.com 3/4 LAN Transformer< SMD Type: CLP Series> Type: CLP0712 ◆ Differential to common mode rejection test circuit ◆ Cross talk test circuit Please refer to the sales offices on our website for a representative near you www.sumida.com 4/4