LAN Transformer< SMD Type: CLP Series> Type: CLP285C ◆ Product Description ・28.0mm Max.×15.0mm Typ. (L×W),6.0mm Max. Height. ・Pulse transformer + filter module for LAN 10/100 Base-T(IEEE802.3). ・In addition to the typical parameters shown here, custom designs are available. ◆ Feature ・10/100Base-T discrete quad port modules. ・Ideally used in LAN applications, DSL router, Wireless router. Hub, Switch, etc. ・RoHS Compliance. 6.0 Max. ◆ Dimensions 15.0 Typ. (mm) 21 28.0 Max. 15.2 ±0.38 40 1 1.27X38 1.00Typ. 20 ] 35 0 1 . 9 4 . 2 0 [ ◆ Land Pattern (mm) ] 0 3 0 . 0 [ 6 7 . 0 L 0 4 × and pattern ] 0 9 0 . 0 [ 9 2 . 2 0 4 × ] 0 9 18 .4 2. 10 [ C24105NP CN ◆Schematics(Bottom) + 4 X T 0 4 4 X T 9 3 D N + G 4 M CX R 8 37 3 1 + 4 D T 2 4 D T 3 4 d d V T C 4 + 4 D R + 2 X T 0 3 2 X T 9 2 D N + G 2 M CX R 8 27 2 2 X R 6 2 + 1 X R 1 3 3 X T 2 3 4 2 D N G M C 3 5 2 2 0 1 + 3 D T 9 3 D T 1 1 + 2 D T 2 1 2 D T 3 1 2 d d V T C 5 1 2 D R 7 1 + 1 D R 6 1 1 D R 6 3 + 3 X R 4 3 3 X R 5 3 D N G M C 3 3 + 3 X T 5 4 D R 7 + 3 D R 6 3 D R 8 3 d d V T C 4 X R 4 1 + 2 D R 1 X R + 1 X T 1 2 8 1 1 d d V T C 1 X T 2 2 9 1 1 D T Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 LAN Transformer< SMD Type: CLP Series> Type: CLP285C ◆ Specification(C24105NP) Item Specification (RX) Specification (TX) Condition Insertion loss -1.0dB Min. -1.0dB Min. 0.1~100MHZ Return loss -18dB Max. -18dB Max. 1~30MHz -14.4dB Max -14.4dB Max 40MHz -13.1dB Max. -13.1dB Max. 50MHz -12dB Max. -12dB Max. 60~80MHz -37dB Max. -37dB Max. 1~60MHz -25dB Max. -25dB Max. 60~200MHz Differential to common Mode rejection OCL Turns ratio Cross talk Hipot 350μH Min. 350μH Min. 1:1±2% 1:1±2% -55dB Max. -55dB Max. -45dB Max. -45dB Max. -40dB Max. -40dB Max. -33dB Max. -33dB Max. AC 1500Vrms 100kHz,100mV,8mA DC bias 100kHz, 100mV 1MHz 30MHz 60MHz 100MHz 0.5mA, 1Min, 50/60Hz Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2