IFT COILS < P-5DJ Series> Type: P-5DJ/FM, P-5DJ/AM, P-5DJ/SW, P-5DJ/MW ◆ Product Description ・5.9×5.9mm Max.(L×W), 6.5mm Max. Height. ・Inductance:1~680μH Max. ・Operating frequency:20MHz Max. ・In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements. ◆ Feature ・Variable shielded high Q types. ・AM,SW,FM types are available. ・Internally assembled condenser is available. ・RoHS Compliance 5.8 ±0.4 3.0 6.5 Max. 5.6±0.3 3.5±0.15 3.5±0.15 3.0±0.4 1.05±0.1 +0.1 φ0.4-0.05 ◆ Dimensions(mm) 5.6±0.3 ＊ Dimension does not include solder used on coil. ＊ Pin pitch shall be measured at the root of terminal. ＊ Dimension without tolerance are approx. ◆ Connection (Bottom View) ③ ④ ④ ⑥ P-5DJ/FM ③ ④ ① ⑥ S P-5DJ/AM ④ S ③ ② ② ② ② S ① S ③ S ① ⑥ P-5DJ/SW S ① ⑥ P-5DJ/MW “S” is winding start Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1 IFT COILS < P-5DJ Series> Type: P-5DJ/FM, P-5DJ/AM, P-5DJ/SW, P-5DJ/MW ◆ Specification ( P－5DJ/FM, Part No.:4162-T124) Item (1−3) Frequency Unloaded Measuring Conditions 10.7MHz ± 3% Q Capacity (Int.) Variable 60 Min. 10.7 MHz 47± 10% Within Ext. stray capacity 6pF between (1-3) at measuring. ◆ Specification ( P－5DJ/AM Part No.:4161-T118) （3−1） Item Tuning frequency 450 kHz ± 2% Measuring Conditions Variable Unloaded Q 60 Min. 450 kHz Capacity(Int.) 180pF ± 10% Within Ext. Stray capacity 5pF between (3-1) at measuring. ◆ Specification( P－5DJ/SW Part No.:4165-T123) Item (１−３) Inductance Unloaded Q 60µH ± 4％ Variable 65 Min. Measuring Conditions 2.52MHz 2.52 MHz ◆ Specification( P－5DJ/MW Part No.:4164-T078) Item (１−３) Inductance Unloaded Q 680µH ± 5％ Variable 75 Min. Measuring Conditions 796kHz 796kHz Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2