IFT COILS < Pin Type: P-7 Series> Type: P-7GL/AM, P-7GL/FM, P-7GL/MW, P-7GL/SW ◆ Product Description ・7.6×7.6mm Max.(L×W), 8.7mm Max. Height. ・Inductance:1~820µH Max. ・Operating frequency:20MHz Max. ・In addition to the reference versions of parameters shown here,custom designs are available to meet your exact requirements ◆ Feature ・Variable shielded type. ・AM,FM,MW,SW types are available. ・Internally assembled condenser is available. ・Ideally used in Radio (FM,AM,MW,SW),TV. Transceiver ・RoHS Compliance 8 .2 ±0.5 7.5 4 .5 ± 0.2 4.5 ±0.2 7.3 ±0.3 φ 0.5 ±0. 1 1.0 ±0.2 ◆ Dimensions (mm) +1.0 3.0-0.5 7.3 ±0.3 * Dimension does not include solder used on coil. * Pin pitch shall be measured at the root of terminal. * Dimension without tolerance are approx. . ◆ Connection (Bottom View) ③ ④ S ③ ④ ⑥ P-7GL/AM ① P-7GL/FM ③ ④ ⑥ S ① P-7GL/MW ③ ④ S ② ② ② ② S ① ` ⑥ S ① ⑥ P-7GL/SW “S” is winding start. Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 IFT COILS < Pin Type: P-7 Series> Type: P-7GL/AM, P-7GL/FM, P-7GL/MW, P-7GL/SW ◆ Specification(P-7GL/AM) (Part No. S01085041) (1-3) Item 455kHz±3% Frequency 50 Unloaded Q Capacity(Int.) Measuring Condition Variable 455kHz Min. 180pF±10% Within Ext. stray capacity 5pF between (1-3) at measuring. ◆ Specification( P-7GL/FM) (Part No. 2132-T003) (3-1) Item Frequency 10.7MHz±2% Variable 60 Unloaded Q Capacity(Int.) Measuring Condition Min. 100pF±10 % 10.7MHz Within Ext. stray capacity 5pF between (3-1) at measuring. ◆ Specification( P-7GL/MW) Item (Part No. S01085055) (1−3) Inductance 130μH ± 4% Unloaded Q 60 ◆ Specification( P-7GL/SW) Item Measuring Condition Variable 796KHz 796KHz Min. (Part No. S01080168) (2−3) Inductance 3.1 mH ± 5% Unloaded Q 40 Min. Measuring Condition Variable 252 KHz 252 KHz Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2