Filter Coils < Pin Type: Y-5 Series> Type: Y-5,Y-5G ◆ Product Description ・6.1×6.1mm Max.(L×W), 8.0mm Max. Height. ・Operating frequency:0.1~20MHz ・In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements ◆Feature ・Variable(Y-5G) and fixed(Y-5) shielded types are both available. ・Two chip capacitors can be internally mounted in one section. ・Ideally used as video frequency LC filters for VCR, video cameras, etc. (LPF, BPF, Delay Line and Equalizers). ・RoHS Compliance 5.8 ± 0. 3 MAX .8. 0 3.0 3.5±0.3 2.5±0.3 Y-5G 5 .8 ±0.3 MAX. 8.0 +1 .0 -0.5 3 .0 3.5±0.3 0.6±0.2 +0.1 φ0.4-0.05 Y-5 MAX.6.1 + 1.0 - 0 .5 0.6±0.2 MAX .6 . 1 + 0.1 φ0.4 - 0.05 ◆Dimensions (mm) ± 0.3 2.5 Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1 Filter Coils < Pin Type: Y-5 Series> Type: Y-5,Y-5G ◆ Testing Circuit Y-5 ◆ Specification (Y-5, Part Number: 2539-JPS-030) Item Specification Input impedance (Rin) 470Ω Output impedance (Rout) 6.8kΩ Attenuation 7.0MHz 3.0dB±3.0dB within 11.2MHz 30dB Min.. 0.1MHz 1.0dB Max. Insertion loss Frequency Response (Attenuation 0dB at 0.1MHz) Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2 Filter Coils < Pin Type: Y-5 Series> Y-5,Y-5G R1 ◆ Testing Circuit { Rint ① ② R2 ③ { Type: Rout Rg Y-5G S.G. ∼ C1 E.V. C2 ④ ⑥ r2 Rin=Rg+R1=1.8KΩ Rout=1.8KΩ C1=C2=430pF±2% ◆ Specification(Y-5G,Part Number: 2540-T024) Item Spec. A Input impedance (Rin) 1.8kΩ Output impedance (Rout) 1.8kΩ Attenuation 2.63MHz 3.0dB±3.0dB within 2.97MHz 3.0dB±3.0dB within 2.0MHz 18dB Min. 3.6MHz 18dB Min. Insertion loss 2.8MHz 4.5dB Max. Group delay time 2.8MHz 1230ns±250ns within Frequency Response (Attenuation 0dB at 2.8MHz) R1 ① ② R2 ③ { { Rint Rout Rg S.G. ∼ C1 ⑥ ④ E.V. C2 r2 Please refer to the sales offices on our website for a representative near you www.sumida.com 3/3