GBU601 THRU GBU607 Single Phase 6.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 6.0 Amperes GBU Features UL Recognized File # E-96005 Ideal for printed circuit board Reliable low cost construction Plastic material has Underwriters Laboratory Flammability Classification 94V-0 Surge overload rating to 175 amperes peak High temperature soldering guaranteed: 260oC / 10 seconds / .375”, (9.5mm) lead lengths at 5 lbs., (2.3kg) tension .310(7.90) .290(7.40) 0.125(3.2)x45 CHAMFER .160(4.1) .140(3.5) .075 (1.9)R .085(2.16) .065(1.65) .100(2.54) .085(2.16) Mechanical Data Case: Molded plastic body. Terminals: Plated leads solderable per MIL-STD750, Method 2026. Weight: 0. 3 ounce, 8.0 grams Mounting torque: 5 in. lb. max. .140(3.56) .130(3.30) .880(22.3) .860(21.8) .020R(TYP.) .080(2.03) .060(1.52) .050(1.27) .040(1.02) 9 TYP. .740(18.8) .720(18.3) .190(4.83) .210(5.33) .080(2.03) .065(1.65) .085(2.16) .075(1.90) .710(18.0) .690(17.5) .022(0.56) .018(0.46) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol GBU GBU Type Number 601 602 50 100 Maximum Recurrent Peak Reverse Voltage VRRM 35 70 Maximum RMS Voltage VRMS 50 100 Maximum DC Blocking Voltage VDC Maximum Average Forward Rectified Current @TC = 100℃ Peak Forward Surge Current, 8.3 ms Single Half Sne-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 6.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ Typical Thermal Resistance (Note 1, 2) Typical Junction Capacitance (Note 3) Operating Temperature Range GBU GBU GBU GBU GBU Units 603 604 605 606 607 200 140 200 400 280 400 600 420 600 800 1000 560 700 800 1000 V V V I(AV) 6.0 A IFSM 175 A VF 1.0 V 5.0 500 7.0 2.0 uA uA ℃/W IR RθJA RθJC Cj 211 94 -55 to +150 -55 to + 150 TJ pF ℃ ℃ TSTG Notes: 1. Mounted on Al. Plate Heatsink of 2” x 3” x 0.25” 2. Bolt on Heatsink with silicone Thermal Compound for Maximum Heat Transfer with #6 Screws. 3. Measured at 1.0 MHZ and Applied Reverse Voltage of 4.0 Volts. Storage Temperature Range - 660 - RATINGS AND CHARACTERISTIC CURVES (GBU601 THRU GBU607) FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT FIG.2-MAXIMUM FORWARD CURRENT DERATING CURVE 6 150 AVERAGE FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 175 125 Tj=150 C 8.3ms Single Half Sine Wave 100 75 50 25 4 2 HEAT-SINK MOUNTG 2" x 3" x 0.25" AI-PLATE 0 0 1 2 10 5 20 50 100 50 0 FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 500 40 100 INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT. (A) 100 20 10 4.0 2.0 1.0 Tj=125 0C 10 1 0.1 Tj=25 0C Pulse Width=300ms 1% Duty Cycle Tj=25 0C 0.2 0 0.6 150 o FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 0.4 100 CASE TEMPERATURE. ( C) NUMBER OF CYCLES AT 60Hz 50-400V 600-1000V 0.01 0.7 0.8 0.9 1.0 1.1 1.2 1.3 INSTANTANEOUSFORWARD VOLTAGE. (V) 0 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) - 661 - 100