GBU6A-GBU6M Single Phase 6.0AMP.Glass Passivated Bridge Rectifiers GBU Features Ideal for printed circuit board Reliable low cost construction Plastic material has Underwriters Laboratory Flammability Classification 94V-0 High case dielectric strength of 1500VRMS Surge overload rating to 175 amperes peak High temperature soldering guaranteed: 260oC / 10 seconds / .375”, (9.5mm) lead lengths at 5 lbs., (2.3kg) tension Mechanical Data Case: Molded plastic body. Weight: 0. 3 ounce, 8.0 grams Mounting torque: 5 in. lb. max. Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Symbol GBU GBU GBU GBU GBU GBU GBU Units 6G 6A 6B 6D 6K 6M 6J VRRM 50 100 200 400 600 800 1000 V VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TC = 100 oC Peak Forward Surge Current, 8.3 ms Single Half Sne-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 3.0A @ 6.0A Maximum DC Reverse Current @ TA=25 oC at Rated DC Blocking Voltage @ TA=125 oC Typical Junction Capacitance (Note 3) Typical Thermal Resistance (Note 1, 2) Operating Temperature Range I(AV) 6.0 A IFSM 175 A VF 1.0 1.1 5.0 500 V IR Cj RθJA RθJC TJ 211 94 7.0 2.0 -55 to +150 -55 to + 150 Storage Temperature Range TSTG 1. Mounted on Al. Plate Heatsink of 2” x 3” x 0.25”. Notes: 2. Bolt on Heatsink with silicone Thermal Compound for Maximum Heat Transfer with #6 Screws. 3. Measured at 1.0 MHZ and Applied Reverse Voltage of 4.0 Volts. http://www.luguang.cn uA uA pF mail:[email protected] o C/W o o C C GBU6A-GBU6M Single Phase 6.0AMP.Glass Passivated Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES FIG.2- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT FIG.1-MAXIMUM FORWARD CURRENT DERATING CURVE 500 4 2 HEAT-SINK MOUNTG 2.6 x 1.4 x 0.06" THK (6.5 x 3.5 x 0.15 cm)AI. PLATE 0 50 0 100 150 o CASE TEMPERATURE. ( C) INSTANTANEOUS REVERSE CURRENT. (mA) AVERAGEFORWARDCURRENT.( mA) 6 100 Tj=125 0C 10 1 0.1 Tj=25 0C 50-400V 600-1000V 0.01 0 175 80 100 20 40 60 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 150 125 Tj=150 C 8.3ms Single Half Sine Wave 100 FIG.4- TYPICAL JUNCTION CAPACITANCE 500 Tj=25 0C 75 300 50 25 0 1 100 2 10 5 20 NUMBER OF CYCLES AT 60Hz 100 50 FIG.5- TYPICAL FORWARD CHARACTERISTICS PER BRIDGE ELEMENT JUNCTION CAPACITANCE.(pF) PEAK FORWARD SURGE CURRENT. (mA) FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT GBU6A-GBU6G 250 200 150 100 GBU6J-GBU6M 50 0 0.1 0.5 1 2 5 10 20 50 100 INSTANTANEOUS FORWARD CURRENT. (A) REVERSE VOLTAGE. (V) 40 20 10 4 2 1 0.4 Tj=25 0C Pulse Width=300ms 1% Duty Cycle 0.2 0.1 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 INSTANTANEOUSFORWARD VOLTAGE. (V) http://www.luguang.cn mail:[email protected] 200 500 800