MBRS1035 - MBRS10150 10.0 AMPS. Surface Mount Schottky Barrier Rectifiers D2PAK Features Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection High temperature soldering guaranteed: o 260 C/10 seconds,0.25”(6.35mm)from case Mechanical Data 2 Dimensions in inches and (millimeters) Cases: JEDEC D PAK molded plastic body Terminals: Pure tin plated, lead free. solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.08 ounce, 2.24 grams Maximum Ratings and Electrical Characteristics o Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol MBRS MBRS MBRS MBRS MBRS MBRS MBRS Units Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current See Fig. 1 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) VRRM VRMS VDC 1045 45 31 45 1035 35 24 35 1090 90 63 90 10100 10150 100 150 70 105 100 150 V V V 10 A IFSM 120 A IRRM 1.0 VF － 0.57 0.84 0.72 Maximum Instantaneous Reverse Current @ TJ =25 oC at Rated DC Blocking Voltage (Note 2) @ TJ=100 oC IR Typical Junction capacitance CJ Operating Junction Temperature Range 1060 60 42 60 I(AV) Maximum Instantaneous Forward Voltage at (Note 2) IF=10A, Tc=25oC IF=10A, Tc=125oC IF=20A, Tc=25oC IF=20A, Tc=125oC Maximum Thermal Resistance, Junction to Case 1050 50 35 50 0.5 0.80 0.70 0.95 0.85 0.85 0.71 － － 0.1 15 390 60 2.0 TJ -65 to +175 -65 to +175 - 54 - 1.05 － － － V 0.1 5.0 220 10 300 RΘJA RΘJC Storage Temperature Range TSTG Notes: 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle. A mA mA pF o C/W o o C C Version: B07 RATINGS AND CHARACTERISTIC CURVES (MBRS1035 THRU MBRS10150) FIG.1- FORWARD CURRENT DERATING CURVE FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 10 160 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) RESISTIVE OR INDUCTIVE LOAD 8 6 4 2 0 Tj=Tj max. 8.3ms Single Half Sine-Wave JEDEC Method 140 120 100 80 60 40 0 50 100 o CASE TEMPERATURE. ( C) 150 1 180 10 100 NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL REVERSE CHARACTERISTICS PER LEG FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG 50 IR-INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT. (A) Tj=150 0C 20 10 Tj=100 0C 5.0 3.0 1.0 Tj=25 0C Tj=100 0C 10 1.0 Tj=25 0C 0.1 0.01 0.5 0 0.2 0.1 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 1.0 TRANSIENT THERMAL IMPEDANCE. ( OC/W) JUNCTION CAPACITANCE.(pF) 500 MBR MBR MBR S10 S109 50-M 0-MB 200 S10 35-M BRS RS10 BRS 106 0 104 5 150 100 0 0.01 60 80 100 100 600 300 40 FIG.6- TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG FIG.5- TYPICAL JUNCTION CAPACITANCE 1000 400 20 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FORWARD VOLTAGE. (V) 0.1 1 REVERSE VOLTAGE. (V) 10 80 10 1 0.1 0.01 0.1 1 10 T, PULSE DURATION. (sec) Version: B07 100