MBR1635 - MBR16150 16.0 AMPS. Schottky Barrier Rectifiers TO-220AC .185(4.70) .175(4.44) .412(10.5) MAX .113(2.87) .103(2.62) Features .27(6.86) .23(5.84) .594(15.1) .587(14.9) Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection Higho temperature soldering guaranteed: 260 C/10 seconds,0.25”(6.35mm)from case PIN1 2 .16(4.06) .14(3.56) .11(2.79) .10(2.54) .56(14.22) .53(13.46) .037(0.94) .027(0.68) .025(0.64) .014(0.35) .205(5.20) .195(4.95) PIN 1 Mechanical Data .055(1.40) .045(1.14) DIA .154(3.91) .148(3.74) PIN 2 Cases: JEDEC TO-220AC molded plastic body Terminals: Pure tin plated, lead free. solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.08 ounce, 2.24 grams CASE Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol MBR MBR MBR MBR MBR MBR MBR Units Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current O at Tc=125 C Peak Repetitive Forward Current (Rated VR, o Square Wave, 20KHz) at Tc=125 C Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at: o (Note 2) IF=16A, TC=25 C o IF=16A, TC=125 C Maximum Instantaneous Reverse Current o @Tc=25 C at Rated DC Blocking Voltage (Note 2) o @ Tc=125 C VRRM VRMS VDC 1690 16100 16150 90 100 150 63 70 105 90 100 150 V V V IFRM 32 A IFSM 150 A IRRM 1.0 VF 0.63 0.57 0.75 0.65 0.85 0.75 0.95 0.92 V IR 0.5 15 0.5 10 10,000 500 3.0 -65 to +150 -65 to +175 0.3 7.5 0.1 5 mA mA V/uS pF Cj RθJC TJ TSTG Notes: 1660 60 42 60 A dV/dt Storage Temperature Range 1650 50 35 50 16 Typical Junction Capacitance Operating Junction Temperature Range 1645 45 31 45 I(AV) Voltage Rate of Change (Rated VR) Maximum Typical Thermal Resistance(Note 3) 1635 35 24 35 0.5 A o C/W o C o C 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case Per Leg with Heatsink Size of 2” x 3”x 0.25” Al-Plate. Version: A06 RATINGS AND CHARACTERISTIC CURVES (MBR1635 THRU MBR16150) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.1- FORWARD CURRENT DERATING CURVE 350 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 20 16 12 8 4 250 200 150 100 50 1 0 0 FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 NUMBER OF CYCLES AT 60Hz 100 FIG.4- TYPICAL REVERSE CHARACTERISTICS 50 Tj=125 0C 10 INSTANTANEOUS FORWARD CURRENT. (A) 150 10 INSTANTANEOUS REVERSE CURRENT. (mA) 40 50 100 o CASE TEMPERATURE. ( C) Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 300 Pulse Width=300 s 1% Duty Cycle 1 Tj=25 0C 0.1 MBR1635-MBR1645 MBR1650-MBR1660 MBR1690-MBR16150 Tj=125 0C 1 Tj=25 0C 0.1 0.01 MBR1635-MBR1645 MBR1650-MBR16150 0.01 0 0.1 0.2 0.3 0.4 0.001 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0 TRANSIENT THERMAL IMPEDANCE. ( OC/W) JUNCTION CAPACITANCE.(pF) 6,000 Tj=25 0C f=1.0MHz Vsig=50mVp-p 1,000 500 1 40 60 80 100 120 140 FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS FIG.5- TYPICAL JUNCTION CAPACITANCE 100 0.1 20 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FORWARD VOLTAGE. (V) 10 REVERSE VOLTAGE. (V) 100 100 10.0 1 0.1 0.01 0.1 1 10 T, PULSE DURATION. (sec) Version: A06 100