UTC 1617 CMOS IC 6 TONES SIREN/ALARM SOUND GENERATOR DESCRIPTION The UTC 1617 is a CMOS design for 6 different alarm sounds application. The sound of UTC 1617 will be generated in cycling sequence. By the way, UTC 1617 is also partitioned to 6 types for single tone siren/alarm sound generator. The types of UTC 1617 Series are listed as following. 1617: 6 tones on chip. 1617A: Single tone which be outputted from 1617’s 1st sound. 1617B: Single tone which be outputted from 1617’s 2nd sound. 1617C: Single tone which be outputted from 1617’s 3rd sound. 1617D: Single tone which be outputted from 1617’s 4th sound. 1617E: Single tone which be outputted from 1617’s 5th sound. 1617F: Single tone which be outputted from 1617’s 6th sound. DIP-8 *Pb-free plating product number: 1617L FEATURES * Low operating voltage: 2V ~ 5V. * On-chip RC oscillator. * Low stand by current. * CMOS process. PIN CONFIGURATION OSC2 1 OSC1 2 8 NC 7 VDD UTC 1617 INI 3 6 BZ2 GND 4 5 BZ1 PIN DESCRIPTIONS Pin No 1 2 3 4 5 6 7 8 Symbol OSC2 OSC1 INI GND BZ1 BZ2 VDD NC UTC I/O I O I O O - Function Oscillator pin with external resistor. An internal pull-up resistor. Might disable BZ1, BZ2, when connected to GND. Power supply pin (-). Audio output pins. Power supply pin (+) . No connecting. UNISONIC TECHNOLOGIES CO., LTD. 1 QW-R502-016,C UTC 1617 CMOS IC ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT VDD -0.3 ~ 6 V Input Voltage Vi -0.3 ~ VDD+0.3 V Output Voltage Vo -0.3 ~ VDD+0.3 V Operating Temperature Topr 0 ~ 65 °C Storage Temperature Tstg -40 ~ 125 °C Supply Voltage ELECTRICAL CHARACTERISTICS (Unless otherwise specified: VDD=3V , Ta=25°C) PARAMETER SYMBOL MIN. TYP. MAX. UNIT VDD 2 3 5 V 300 500 Operating Voltage Operating Current Iop BZ1, BZ2 Driving Current Ioh Iol 1 Operating Frequency Fop 70 uA 1 mA mA 80 128 K Hz APPLICATION CIRCUIT (Ⅰ) VDD 12V IN5392 2.2K 10µ/16V 1K 945 ZD 100 3.3 V 882 UTC 1617 0.01µ UTC 1 OSC2 51K 2 OSC1 3 INI 4 GND NC VDD BZ2 BZ1 8 7 6 5 680 UNISONIC TECHNOLOGIES CO., LTD. 2 QW-R502-016,C UTC 1617 CMOS IC APPLICATION CIRCUIT (Ⅱ) VDD 12V IN5392 2.2K 10µ/16 V 1K 772 772 945 ZD 100 UTC 1617 0.01µ 1 51K 2 3 4 945 3.3 V OSC2 OSC1 INI GND 8 NC 7 VDD 6 680 BZ2 5 BZ1 680 882 100 882 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UTC UNISONIC TECHNOLOGIES CO., LTD. 3 QW-R502-016,C