UNISONIC TECHNOLOGIES CO., LTD DTD114E NPN SILICON TRANSISTOR NPN DIGITAL TRANSISTOR (BUILT- IN BIAS RESISTORS) FEATURES * Built-in bias resistors that implies easy ON/OFF applications. * The bias resistors are thin-film resistors with complete isolation to allow negative input. EQUIVALENT CIRCUIT *Pb-free plating product number:DTD114EL ORDERING INFORMATION Order Number Normal Lead Free Plating DTD114E-AE3-R DTD114EL-AE3-R DTD114E-AL3-R DTD114EL-AL3-R Package SOT-23 SOT-323 Pin Assignment 1 2 3 G I O G I O Packing Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd 1 of 3 QW-R206-043,B DTD114E NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER SYMBOL RATING UNIT Supply Voltage VCC 50 V Input Voltage VIN -10~+40 V Output Current IOUT 500 mA Power Dissipation PD 200 mW Junction Temperature TJ 150 °C Storage Temperature TSTG -55 ~ +150 °C Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL SPECIFICATIONS (Ta=25°C, unless others specified) PARAMETER SYMBOL VIN(OFF) Input Voltage VIN(ON) Output Voltage VOUT(ON) Input Current IIN Output Current IOUT(OFF) DC Current Gain hFE Input Resistance R1 Resistance Ratio R2/R1 Transition Frequency fT *Transition frequency of the device TEST CONDITIONS VCC =5V, IOUT =100μA VOUT =0.3V, IOUT =10mA IOUT/IIN =50mA/2.5mA VIN=5V VCC =50V, VIN =0V VOUT =5V, IOUT =50mA VCE =10V, IE =−50mA, f=100MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX 0.5 UNIT 0.1 0.3 0.88 0.5 V mA μA 10 1 200 13 1.2 kΩ 3 56 7 0.8 V MHz 2 of 3 QW-R206-043,B DTD114E NPN SILICON TRANSISTOR DC Current Gain, hFE Output Voltage, VOUT(ON) (mV) TYPICAL CHARACTERISTICS UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R206-043,B