UNISONIC TECHNOLOGIES CO., LTD RB521S30 DIODE SCHOTTKY BARRIER DIODES FEATURES - * Miniature surface mounting type * Low forward voltage drop (VF=0.40V Typ. at 200mA) * Low reverse leakage current * Fast switching speed + SOD-523 *Pb-free plating product number: RB521S30L ORDERING INFORMATION Order Number Normal Lead Free Plating RB521S30-CC2-R RB521S30L-CC2-R Package Packing SOD-523 Tape Reel RB521S30L-CC2-R (1)Packing Type (2)Package Type (3)Lead Plating (1) R: Tape Reel (2) CC2: SOD-523 (3) L: Lead Free Plating, Blank: Pb/Sn MARKING 5M Lead Plating www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-012,A RB521S30 DIODE ABSOLUTE MAXIMUM RATINGS (Single Diode @TA=25℃) PARAMETER SYMBOL RATINGS UNIT Maximum Reverse Voltage (DC) VR 30 V Average Rectified Forward Current IOUT 200 mA Non-repetitive Peak Forward Surge Current IFSM 1 A ℃ Junction Temperature TJ +125 ℃ Storage Temperature TSTG -40 ~ +125 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA=25℃, unless otherwise specified) PARAMETER Forward Voltage Drop Reverse Leakage Current SYMBOL CONDITIONS VF IF=200mA IR VR=10V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX 0.5 30 UNIT V µA 2 of 3 QW-R601-012,A RB521S30 DIODE TYPICAL CHARACTERISTICS Total Capacitance Forward Voltage Characteristics 1000 Ta = 25℃ f = 1MHz 3 1 -25 ℃ 25 ℃ Ta = = 12 5℃ 75 ℃ 1 Ta = Ta = 2 10 Ta Forward Current, IF (mA) Total Capacitance, CT (pF) 100 0.1 0.01 0 0.001 0 4 2 8 6 12 10 0 14 0.2 0.3 0.4 0.5 0.6 Forward Voltage, VF (V) Reverse Voltage, VR (V) Reverse Voltage Characteristics Forward CurrentDerating Curve 10000 100 Ta = 125℃ 1000 80 Reverse Current, IR (µA) Average Rectified Forward Current, IOUT (%) 0.1 60 40 20 0 Ta = 75℃ 100 Ta = 25℃ 10 1 Ta = -25℃ 0.1 0 25 50 75 100 125 150 Ambient Temperature, Ta(℃) 0.01 0 10 20 30 Reverse Voltage, VR (V) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-012,A