UNISONIC TECHNOLOGIES CO., LTD SB160 Preliminary DIODE 1.0A SCHOTTKY BARRIER RECTIFIER DESCRIPTION The UTC SB160 is a Schottky Rectifier with high current capacity and low forward voltage. The UTC SB160 is suitable for polarity protection ,low voltage and high frequency inverters and free wheeling applications DO-41 FEATURES * High Current Capability * Low Forward Voltage ORDERING INFORMATION Ordering Number Lead Free Halogen Free SB160L-Z41-R SB160G-Z41-R Note: Pin Assignment: A: Anode, K: Cathode www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd Package DO-41 Pin Assignment 1 2 K A Packing Tape Reel 1 of 2 QW-R601-066.a SB160 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA =25°C unless otherwise specified.) PARAMETER SYMBOL RATINGS UNIT Peak Repetitive Reverse Voltage VRRM 60 V Working Peak Reverse Voltage VRWM 60 V DC Blocking Voltage VR 60 V RMS Reverse Voltage VR(RMS) 42 V Forward Voltage (IF=1.0A) (Note 3) VFM 0.7 V Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 40 A (JEDEC Method) Average Rectified Output Current (Note 2) IO 1.0 A T = 25°C 0.5 mA Peak Reverse Current at Rated DC A IRM Blocking Voltage (Note 3) TA= 100°C 5.0 mA Operating Temperature TJ -65~+150 °C Storage Temperature TSTG -65~+150 °C Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Measured at ambient temperature at a distance of 9.5mm from the case. 3. Short duration test pulse used to minimize self-heating effect. THERMAL DATA PARAMETER Junction to Ambient SYMBOL θJA RATINGS 50 UNIT °C/W UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R601-066.a