UNISONIC TECHNOLOGIES CO., LTD U74HC32 CMOS IC QUADRUPLE 2-INPUT POSITIVE-OR GATES DESCRIPTION DIP-14 The UTC U74HC32 devices contain four independent 2-input OR gates. They perform the Boolean function Y = A • B or Y = A+B in positive logic. SOP-14 FEATURES * Wide Operating Voltage Range of 1.0V ~ 7.0V * Low Power Consumption, 20µA Max ICC * ±20mA Output Drive at 5V * Low Input Current of 1µA Max TSSOP-14 *Pb-free plating product number: U74HC32L ORDERING INFORMATION Order Number Normal Lead Free Plating U74HC32-D14-T U74HC32L-D14-T U74HC32-S14-T U74HC32L-S14-T U74HC32-S14-R U74HC32L-S14-R U74HC32-P14-T U74HC32L-P14-T Package Packing DIP-14 SOP-14 SOP-14 TSSOP-14 Tube Tube Tape Reel Tube U74HC32L-D14-R (1)Packing Type (2)Package Type (3)Lead Plating www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd (1) R: Tape Reel, T: Tube (2) D14: DIP-14, S14: SOP-14, P14: TSSOP-14 (3) L: Lead Free Plating, Blank: Pb/Sn 1 of 5 QW-R502-075,B U74HC32 CMOS IC PIN CONFIGURATION 1A 1 14 VCC 1B 2 3 13 12 4B 1Y 2A 4 11 4Y 3B 2Y 5 6 10 9 GND 7 8 3Y 2B 4A 3A LOGIC DIAGRAM (positive logic) A B Y FUNCTION TABLE (each inverter) INPUT A H X L B X H L OUTPUT Y H H L UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-075,B U74HC32 CMOS IC ABSOLUTE MAXIMUM RATINGS (unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Supply Voltage Range VCC 1.0~7.0 V IIK (VIN<0 or VIN>VCC (see Note 1) ±20 mA Input Clamp Current IOK (VOUT<0 or VOUT>VCC(see Note 1) ±20 mA Output Clamp Current Continuous Output Current IO(VOUT = 0 ~ VCC) ±25 mA Continuous Current Through VCC or GND ±50 mA Storage Temperature TSTG -65 ~ +150 ℃ Note : 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER SYMBOL SOP-14 DIP-14 TSSOP-14 Thermal Resistance Junction Ambient θJA RATINGS 86 80 113 UNIT ℃/W ℃/W ℃/W RECOMMENDED OPERATING CONDITIONS (TA = 25℃) PARAMETER Supply Voltage SYMBOL VCC High-Level Input Voltage VIH Low- Level Input Voltage VIL TEST CONDITIONS VCC = 2 V VCC = 4.5 V VCC = 6 V VCC = 2 V VCC = 4.5 V VCC = 6 V MIN 2 1.4 3 4.2 TYP 4.5 Input Voltage VIN 0 Output Voltage VOUT 0 Input transition Rise/Fall Time dt/dv VCC = 4.5 V Operating Free-Air Temperature TA -40 Note: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. MAX 6 0.7 1.5 2 VCC VCC 500 85 UNIT V V V V V V V V V ns ℃ ELECTRICAL CHARACTERISTICS (Ta=25℃, unless otherwise noted) PARAMETER SYMBOL High-Level Output Voltage VOH Low-level Input Voltage VOL TEST CONDITIONS MIN VCC =4.5V, VIN = VIH or VIL, IOH=−20µA 4.4 VCC =4.5V, VIN = VIH or VIL, IOH=−4mA 3.98 VCC =4.5V, VIN = VIH or VIL, IOL=20µA VCC =4.5V, VIN = VIH or VIL, IOL=4mA VCC =6V, VIN=VCC or 0 VCC =6V, VIN=VCC or 0, IOUT=0 TYP MAX UNIT 4.5 V 4.3 0.001 0.1 V 0.18 0.26 ±0.1 ±100 nA 20 µA Input Current IIN Quiescent Supply Current ICC Operating Characteristics Power Dissipation Capacitance Per Cpd No load 20 Gate Note: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw pF 3 of 5 QW-R502-075,B U74HC32 CMOS IC SWITCHING CHARACTERISTICS OVER RECOMMENDED OPERATING FREE-AIR TEMPERATURE RANGE (Ta = 25℃, CL = 50 pF, unless otherwise specified) PARAMETER SYMBOL FROM(INPUT) TO(OUTPUT) Propagation Delay from A or B to Y VCC 2V tpd A or B Y Output Rise and Fall Time tT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Y MIN TYP MAX 43 UNIT 4.5V 18 ns 6V 2V 4.5V 6V 15 33 19 17 ns 4 of 5 QW-R502-075,B U74HC32 CMOS IC TEST CIRCUIT AND WAVEFORMS Output C L (Note) Note: CL includes probe and jig capacitance. VCC 1/2 * VCC Input 1/2 * VCC tPLH tPHL GND VOH 1/2 * VCC Output 1/2 * VCC VOL UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-075,B