UTC MC4560 LINEAR INTEGRATED CIRCUIT DUAL OPERATIONAL AMPLIFIER DESCRIPTION The UTC MC4560 integrated circuit is a high-gain, wide-bandwidth, dual operational amplifier capable of driving 20V peak-to-peak into 400 Ω loads. The SOP-8 MC4560 combines many of the features of the MC4558 as well as providing the capability of wider bandwidth, and higher slew rate make the MC4560 ideal for active filters, data and telecommunications, and many instrumentation applications. The availability of the MC4560 in the surface mounted micro-package allows the MC4560 to be used in critical applications requiring very high packing densities. DIP-8 FEATURES *Operating Voltage (±4V~±18V) *Wide Gain Bandwidth Product. (10MHz typ.) *Slew Rate (4V / µs typ.) *Bipolar Technology PIN CONFIGURATION UTC OUT1 1 8 Vcc+ IN1(-) 2 7 OUT2 IN1(+) 3 6 IN2(-) Vcc- 4 5 IN2(+) UNISONIC TECHNOLOGIES CO., LTD. 1 QW-R105-014,A UTC MC4560 LINEAR INTEGRATED CIRCUIT BLOCK DIAGRAM Vcc+ IN(-) OUTPUT IN(+) Vcc- ABSOLUTE MAXIMUM RATINGS(Ta=25℃) PARAMETER Supply Voltage SYMBOL RATINGS UNIT V+/V- ±18 V Differential Input Voltage VID ±30 V Input Voltage VI ±15(note) V Power Dissipation DIP-8 SOP-8 Operating Temperature Range PD 500 300 mW mW -20 ~ +75 °C TOPR Storage Temperature Range TSTG -40 ~ +125 °C Note: For supply voltage less than ±15V, the absolute maximum input voltage is equal to the supply voltage. UTC UNISONIC TECHNOLOGIES CO., LTD. 2 QW-R105-014,A UTC MC4560 LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS (Ta=25°C , V+/V-=±15V) SYMBOL TEST CONDUCTION MIN TYP MAX UNIT Input offset voltage Input offset current Input bias current Input Resistance Large Signal Voltage Gain PARAMETER VIO IIO IB RIN Av Rs≤10kΩ RL≥2kΩ, Vo=±10V 0.3 86 0.5 5 40 5 100 6 200 500 - mV nA nA MΩ dB Maximum Output Voltage 1 VOM1 RL≥2kΩ ±12 ±14 - V ±10 ±11.5 - V ±12 ±14 - V 70 76.5 90 90 - dB dB Maximum Output Voltage 2 Input Common Mode Voltage Range Common Mode Rejection Ratio Supply Voltage Rejection Ratio VOM2 IO=25mA VICM CMR SVR Rs≤10kΩ Rs≤10kΩ Operating Current Icc - 4.3 5.7 mA Slew Rate Gain Bandwidth Product Equivalent Input Noise Voltage SR GB VNI - 4 10 1.2 - V/µs MHz µVrms UTC RIAA,RS=2kΩ, 30kHz LPF UNISONIC TECHNOLOGIES CO., LTD. 3 QW-R105-014,A UTC MC4560 LINEAR INTEGRATED CIRCUIT TYPICAL CHARACTERISTICS OPEN LOOP VOLTAGE GAIN vs. FREQUENCY (V+/V- =±15V, RL=2KΩ, Ta=25°C) MAXIMUM OUTPUT VOLTAGE SWING vs. FREQUENCY (V+/V- =±15V, Ta=25°C) MAXIMUM OUTPUT VOLTAGE SWING vs. LOAD RESISTANCE (V+/V- =±15V, Ta=25°C) EQUIVALENT INPUT NOISE VOLTAGE vs. FREQUENCY (V+/V- =±15V, Rs=50Ω, Av=60dB, Ta=25°C) OPERATING CURRENT vs. TEMPERATURE (V+/V- =±15V) UTC MAXIMUM OUTPUT VOLTAGE SWING vs. TEMPERATURE (V+/V- =±15V, RL=2kΩ) UNISONIC TECHNOLOGIES CO., LTD. 4 QW-R105-014,A UTC MC4560 LINEAR INTEGRATED CIRCUIT INPUT OFFSET VOLTAGE vs. TEMPERATURE (V+/V- =±15V) MAXIMUM OUTPUT VOLTAGE SWING vs. SUPPLY VOLTAGE (RL=400Ω, Ta=25°C) INPUT BIAS CURRENT vs. TEMPERATURE (V+/V- =±15V) OPERATING CURRENT vs. OPERATING VOLTAGE (Ta=25°C) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UTC UNISONIC TECHNOLOGIES CO., LTD. 5 QW-R105-014,A