UTC-IC MC1458L-S08-R

UNISONIC TECHNOLOGIES CO., LTD
MC1458
LINEAR INTEGRATED CIRCUIT
DUAL OPERATIONAL AMPLIFIER
„
DESCRIPTION
The UTC MC1458 is a high performance dual operational amplifier. It
is designed for a wide range of analog applications. The high gain and
wide range of operating voltages provide superior performance in
summing amplifier, voltage follower, integrator, active filter, function
generator and general feed back applications.
„
FEATURES
* Low power consumption
* Wide input voltage range
* No latch-up
* High gain
* Short-circuit protection
* Frequency compensation is unnecessary
*Pb-free plating product number: MC1458L
■
ORDERING INFORMATION
Order Number
Normal
Lead Free Plating
MC1458-D08-T
MC1458L-D08-T
MC1458-S08-R
MC1458L-S08-R
MC1458-S08-T
MC1458L-S08-T
www.unisonic.com.tw
Copyright © 2005 Unisonic Technologies Co., Ltd
Package
Packing
DIP-8
SOP-8
SOP-8
Tube
Tape Reel
Tube
1 of 5
QW-R105-008,B
MC1458
■
LINEAR INTEGRATED CIRCUIT
PIN CONFIGURATIONS
OUT1
1
8
Vcc+
IN1(-)
2
7
OUT2
IN1(+)
3
6
IN2(-)
Vcc-
4
5
IN2(+)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 5
QW-R105-008,B
MC1458
■
LINEAR INTEGRATED CIRCUIT
TEST CIRCUIT
IN-
IN+
VCC+
Q13
Q9
Q8
Q26
Q12
Q14
Q15
Q19
R9
Q1
Q2
Q18
OUT
R5
R10
R13
Q3
Q4
Q25
Q20
Q16
Q7
Q24
Q17
Q5
R1
Q6
R3
Q10
R2
R4
Q22
R12
Q23
R11
R14
VCC-
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 5
QW-R105-008,B
MC1458
■
LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS (Ta=25°C)
PARAMETER
Supply Voltage
Differential Input Voltage
Input Voltage
RATINGS
UNIT
-22 ~ +22
V
-30 ~ +30
V
-15 ~ +15
V
SOP-8
300
Power Dissipation
PD
mW
DIP-8
500
Output Short Circuit Duration
Infinite
Operating Ambient Temperature Range
TOPR
0 ~ 70
°C
Storage Temperature Range
TSTG
-65~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
■
SYMBOL
VCC
VI(DIFF)
VIN
ELECTRICAL CHARACTERISTICS (VCC=±15V,Ta=25°C, unless otherwise specified )
PARAMETER
SYMBOL
Input Offset Voltage (RS≤10kΩ)
VI(OFF)
Input Offset Current
II(OFF)
Input Bias Current
II(BIAS)
Large Signal Voltage Gain
(Vo=+-10V,RL=2kΩ)
Supply Voltage Rejection Ratio
(Rs≤10kΩ)
Supply Current(all Amp, no Load)
Input Common Mode Voltage Range
Common-Mode Rejection Ratio
(RS≤10kΩ)
Output Short-Circuit Current
Output Voltage Swing
GV
SVR
ICC
VIN(CM)
CMR
Ios
±Vopp
Slew Rate
SR
Rise Time
tr
Over-Shoot
KOS
Input Resistance
Common-Mode Input Impedance
Input Capacitance
Output Resistance
RIN
ZIN
CIN
ROUT
Full Power Bandwidth
FBW
Unity Gain Bandwidth
GBW
Gain Bandwidth Product
GBP
TEST CONDITIONS
Ta=+25°C
0°C ≤Ta ≤ 70°C
Ta=+25°C
0°C ≤ Ta ≤ 70°C
Ta=+25°C
0°C ≤Ta ≤ 70°C
Ta=+25°C
0°C ≤Ta ≤ 70°C
Ta=+25°C
0°C ≤Ta≤70°C
Ta=+25°C
0°C ≤Ta ≤ 70°C
Ta=+25°C
0°C ≤Ta ≤ 70°C
Ta=+25°C
0°C ≤ Ta ≤ 70°C
Ta=+25°C
RL=10kΩ
Ta=+25°C
RL=2kΩ
RL=10kΩ
0°C ≤Ta ≤70°C
RL=2kΩ
VIN=±10V, RL=2kΩ, CL=100pF,
Ta=+25°C, unity gain
VIN=20mV, RL=2kΩ, CL=100pF,
Ta=+25°C, unity gain
VIN=20mV, RL=2kΩ,CL=100pF,
Ta=+25°C, unity gain
50
25
77
77
RL=2kΩ,VOUT ≥ ±10V,
GV=1,THD ≤ 5%
VIN=10mV, RL=2kΩ, CL=100pF,
Ta=+25°C
VIN=10mV,RL=2kΩ, CL=100pF,
t=100kHz,Ta=+25°C
TYP MAX
1
5
6
2
200
300
30
500
800
200
90
2.3
±12
±12
70
70
10
12
10
12
10
0.2
0.3
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
0.4
5
6
90
20
14
13
35
UNIT
mV
mV
nA
nA
nA
nA
V/mV
V/mV
dB
dB
mA
mA
V
V
dB
dB
mA
V
V
V
V
0.8
V/μs
0.3
μs
5
%
2
200
1.4
75
MΩ
MΩ
pF
Ω
14
KHz
1
MHz
1
MHz
4 of 5
QW-R105-008,B
MC1458
■
LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS(Cont.)
PARAMETER
Total Harmonic Distortion
Equivalent Input Noise Voltage
Phase Margin
Gain Margin
Channel Separation
SYMBOL
THD
eN
TEST CONDITIONS
F=1kHz, Av=20dB, RL=2kΩ,
VOUT=2Vpp,CL=100pF,Ta=25°C
F=kHz, Rs=100Ω
φm
Am
Vo1/Vo2
MIN
TYP
0.02
45
65
11
120
MAX
UNIT
%
nV
√ Hz
Deg.
dB
dB
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R105-008,B