VCXO C5410 Typical Applications Features Base Stations Test Equipment Switching AT-Cut Crystal Dual-inline oscillator Surface Mount Option Previous Vectron Model Numbers TQDILVC; TQDILVH Frequency range 1 MHz – 80 MHz Standard frequencies 16.384; 32.768; 34.368 MHz; 51.840; 61.44; 68.736 MHz Frequency stabilities1 Parameter Min vs. operating temperature range (Referenced to +25°C) Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging /1. Year Typ -20.0 Min -10.0 -2.0 -1.0 -2.0 Typ Units Operating temp range Ordering Code5 +20.0 ppm -20 … +70°C D205 Max. +10.0 +2.0 +1.0 +2.0 Units ppm ppm ppm ppm Units VDC Max. Condition @vc=Vs/2 fo < 80 MHz VS ± 5% Load ± 10% fo < 80 MHz Supply voltage Parameter Supply voltage (Vs) Min 4.75 Typ 5.0 Max. 5.25 40 mA 3.135 3.3 3.465 VDC 40 mA Current consumption Supply voltage (Vs) Current consumption Condition Ordering Code5 SV050 @ HCMOS fo < 60.0 MHz SV033 @ HCMOS RF output Parameter Signal Min Load Rise and Fall time Duty cycle Typ Max. HCMOS 15.0 5 60 40 Units Condition pF ns % Ordering Code5 RFH @ 15 pF 10 to 90 % @ Vs/2 Frequency Tuning (EFC) Parameter Tuning Range Linearity Tuning Slope Control Voltage Range Frequency control input impedance Min ±100.0 Typ ±140.0 0.5 10 2.5 Max. ±200.0 10 Positive 4.5 Units ppm % VDC kΩ Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Condition v.2005-02-11 · page 1 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax VCXO C5410 Additional parameters Parameter Phase Noise Min Weight Processing & Packing Typ -80 -110 -135 -145 -150 Max. Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 10 100 1 10 100 Condition Hz @16,384 Hz MHz kHz HCMOS kHz 5.0 V kHz Typ. for fo < 30 MHz -70 -90 -85 -80 -90 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 10 100 1 10 100 Hz Hz kHz kHz kHz 6 handling&processing note g Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax @32,768 MHz HCMOS 5.0 V Typ. for fo > 30 MHz v.2005-02-11 · page 2 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax VCXO C5410 Enclosures Type G125 Package Codes: Code Height “H” A1 7.5 Type G175 Pin Length “L” 5.85 Code B1 Height “H” 9.4 20,7max. 22,7max. G 125 15,24±0,3 Pin Length “L” NA 14 8 1 7 9,4; G175 Standard 1 5 ,1 m a x . 1 0 ,9 m a x . H= Pin 1 corner ± 0 ,2 8 13,1m ax. 14 7,62 ±0,3 7 4,58 ±0,5 12,2±0,5 1 G 175 18,5max. H = 7,5max.; G125 Standard H S Auflage fläche S H 0,1 15,24 ø0,45 ± 0 ,1 ±0,1 1 3 ,2 5,85m in. 0,8m ax. 1,8 ±0,1 Dimensions: mm Dimensions: mm Pin Connections 1 7 8 14 Pin Connections Control Voltage (Vc) Ground (Case) RF Output Supply Voltage Input (Vs) 1 7 8 14 Outline Drawing: G125 Control Voltage (Vc) Ground (Case) RF Output Supply Voltage Input (Vs) Outline Drawing: G175 Marking C5410A1-xxxx frequency * C AYYWW Absolute Maximum Ratings Parameter Supply voltage (Vs) Min Operable temperature range Storage temperature range -30 -40 Typ Max. 7 Units V +80 +90 °C °C Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Condition v.2005-02-11 · page 3 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax VCXO C5410 Standard Shipping Method Lage im Gurt Position in tape Pin 1 A Abwickelrichtung Unwinding direction X B P Gurtunterseite Tape buttom side K Gurtoberseite Tape upper side *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] G175 44 Quantity per meter 50 Quantity per reel 300 Dimension P 20 Recommended Reflow Profile SMD oscillators must be on the top side of the PCB during the reflow process. Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2005-02-11 · page 4 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax VCXO C5410 How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative: Model Stability Code Supply Voltage Code RF Output Code Package Code RFH A1 C5410 Example: Step 2 C5410 D205 SV050 The factory representative will then respond with a Vectron Model Number in the following Configuration: Model Package Code Dash Dash Number C5410 [Customer Specified Package Code] - [Factory Generated 4 digit number] Typical P/N = C5410A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2005-02-11 · page 5 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax