Document 893 -1 High Frequency, High Current Power Inductors • Excellent Q factors – up to 230 at 400 MHz! • Current handling as high as 57 Amps • Inductance values from 22 to 257 nH Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver over copper Ambient temperature –40°C to +125°C with Irms current, +125°C to +145°C with derated current Storage temperature Component: –40°C to +145°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Mean Time Between Failures (MTBF) 1 billion hours PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Irms (A)5 Inductance2 DCR Q test SRF typ4 (mOhm) ±20% Q3 freq 20°C 40°C Weight Part number1 (nH) typ (MHz) (MHz) typ max rise rise (g) 1010VS-23NME_ 23.5 95 100 923 1.051.20 18.0 26.0 0.49 1010VS-46NME_ 46.5 150 100 526 1.501.62 17.9 25.5 0.65 1010VS-79NME_ 79.0 135 50 386 1.952.11 17.8 25.0 0.82 1010VS-111ME_ 111150 50382 2.53 2.73 15.7 22.0 0.98 1010VS-141ME_ 146140 50433 3.08 3.33 14.1 19.3 1.23 1212VS-22NME_ 22.0 200 100 918 0.480.55 40.5 57.0 2.20 1212VS-42NME_ 42.0 195 50 557 0.700.77 38.0 52.0 2.70 1212VS-66NME_ 66.0 200 50 480 0.900.99 35.0 48.0 3.20 1212VS-90NME_ 90.0 175 50 444 1.101.21 33.0 45.0 3.70 1212VS-111ME_ 117165 50399 1.30 1.43 32.0 44.0 4.20 2014VS-33NME_ 33230 100620 0.63 0.74 32.5 43.0 1.60 2014VS-66NME_ 66200 50413 0.90 1.00 31.5 42.5 2.30 2014VS-111ME_ 108210 50320 1.20 1.34 31.0 42.0 3.10 2014VS-151ME_ 155205 50296 1.44 1.60 29.4 39.7 3.60 2014VS-201ME_ 202200 50262 1.70 1.82 26.3 35.8 4.40 2014VS-251ME_ 257200 50230 1.94 2.15 24.9 34.5 5.00 1. When ordering, specify packaging code: 2014VS-251MEC Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape. B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked. 2. Inductance measured at 1.0 MHz, 0.1 Vrms, 0 A using an Agilent/HP HP4291A impedance analyzer with an Agilent/HP 16193A test fixture or equivalents. 3. Q measured at the specified frequency using an Agilent/HP 4291A impedance analyzer or equivalent. 4. SRF measured using an Agilent/HP 8753 network analyzer or equivalent and a Coilcraft CCF1199 test fixture 5. Current that causes the specified temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 893-1 Revised 01/23/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 893-2 High Frequency, High Current Power Inductors – 1010VS, 1212VS, 2014VS L vs Frequency 1000 Q vs Frequency 300 561RAU 1010VS 561RAU 1010VS 250 23.5 nH 225 100 79 nH 175 146 nH Q Factor Inductance (nH) 200 111 nH 79 nH 111 nH 150 125 146 nH 100 46.5 nH 46.5 nH 75 50 23.5 nH 25 10 1 100 10 0 1000 1 10 Frequency (MHz) 1000 100 1000 Frequency (MHz) 300 615RAU 1212VS 615RAU 1212VS 250 225 66 nH 22 nH 175 Q Factor Inductance (nH) 200 117 nH 100 90 nH 66 nH 42 nH 150 90 nH 125 117 nH 100 42 nH 75 50 22 nH 25 10 1 100 10 0 1000 1 10 Frequency (MHz) 1000 100 1000 Frequency (MHz) 300 643RAU 2014VS 643RAU 2014VS 250 257 nH 200 202 nH 175 Q Factor Inductance (nH) 225 155 nH 100 108 nH 33 nH 202 nH 150 66 nH 108 nH 155 nH 257 nH 125 100 66 nH 75 33 nH 50 25 10 1 10 100 1000 0 1 Frequency (MHz) US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] 10 100 1000 Frequency (MHz) Document 893-2 Revised 01/23/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 893-3 High Frequency, High Current Power Inductors – 1010VS, 1212VS, 2014VS 1010VS 2014VS 0.100 2,54 0.160 4,06 0.375 9,53 0.394 max 10,0 XXX X XXX X 0.311 7,91 Internal code Dash number Recommended Land Pattern 0.394 max 10,0 0.770 max 19,56 Dash number 0.004 / 0,10 Internal code 0.336 ±0.01 8,55 ±0,25 Part number Height inches mm 1010VS-23N 1010VS-46N 1010VS-79N 1010VS-111 1010VS-141 0.142 0.161 0.189 0.220 0.240 3,60 4,10 4,80 5,60 6,10 Weight (g) 0.49 0.65 0.82 0.98 1.23 Recommended Land Pattern Height (See table) 0.004 / 0,10 0.296 min 7,52 0.10 2,54 1212VS 0.130 3,30 XXX X 0.515 16,08 0.472 max 12,0 0.348 8,84 Recommended Land Pattern Height (See table) 0.004 / 0,10 0.10 2,54 0.357 ±0.040 9,07 ±1,02 All dimensions are in inches . mm Part number 2014VS-33N 2014VS-66N 2014VS-111 2014VS-151 2014VS-201 2014VS-251 Height Weight inches mm (g) 0.236 5,99 1.6 0.279 7,09 2.3 0.327 8,31 3.1 0.362 9,19 3.6 0.409 10,4 4.4 0.449 11,4 5.0 0.355 9,02 Dash Internal number code 0.453 max 11,5 0.218 min 5,56 0.410 10,41 0.150 3,81 0.535 max 13,60 0.069 1,75 0.205 5,21 0.643 16,33 0.185 4,70 Height (See table) 0.211 min 5,36 0.290 7,37 Part number Height inches mm 1212VS-22N 1212VS-42N 1212VS-66N 1212VS-90N 1212VS-111 0.260 0.299 0.346 0.409 0.445 6,60 7,60 8,80 10,4 11,3 Weight (g) 2.2 2.7 3.2 3.7 4.2 0.13 3,30 0.10 2,54 Packaging 1010VS-23N250/7″ reel; ; 1000/13″ reel; 3.81 mm pocket depth 1010VS-46N250/7″ reel; ; 900/13″ reel; 4.32 mm pocket depth 1010VS-79N200/7″ reel; ; 800/13″ reel; 5.05 mm pocket depth Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing 1010VS-111175/7″ reel; ; 700/13″ reel; 5.84 mm pocket depth 1010VS-141150/7″ reel; ; 600/13″ reel; 6.35 mm pocket depth Plastic tape: 24 mm wide, 0.40 mm thick, 16 mm pocket spacing 1212VS-22N450/13″ reel; 8.86 mm pocket depth 1212VS-42N400/13″ reel; 7.87 mm pocket depth 1212VS-66N350/13″ reel; 9.02 mm pocket depth 1212VS-90N300/13″ reel; 10.67 mm pocket depth 1212VS-111250/13″ reel; 11.68 mm pocket depth Plastic tape: 24 mm wide, 0.50 mm thick, 20 mm pocket spacing 2014VS-33N500/13″ reel; 6,22 mm pocket depth 2014VS-66N450/13″ reel; 7,37 mm pocket depth 2014VS-111400/13″ reel; 8,56 mm pocket depth 2014VS-151350/13″ reel; 9,45 mm pocket depth 2014VS-201350/13″ reel; 10,67 mm pocket depth 2014VS-251250/13″ reel; 11,68 mm pocket depth Plastic tape: 44 mm wide, 0.50 mm thick, 20 mm pocket spacing US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 893-3 Revised 01/23/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: 1212VS-111MEB 1010VS-111MEB 2014VS-111MEB 1212VS-111MED 1212VS-66NMED 1010VS-46NMEC 2014VS-251MEB 2014VS-251MED 1212VS-66NMEB 1010VS-111MEC 2014VS-111MED 1010VS-23NMEB 2014VS-151MEB 2014VS-66NMED 1010VS-23NMEC 2014VS-66NMEB 1212VS-22NMED 1010VS-46NMEB 1212VS-22NMEB 1010VS-79NMEC 2014VS-201MED 1212VS-42NMED 1010VS-141MEB 1212VS-42NMEB 2014VS-33NMEB 1212VS-90NMEB 2014VS-151MED 2014VS-201MEB 1010VS-141MEC 1010VS-79NMEB 1212VS-90NMED 2014VS-33NMED