Document 184-1 Midi Spring Air Core Inductors ® • Air core inductors feature high Q and current handling • Acrylic top provides a flat surface for pick and place • Solder coated leads ensure reliable soldering Weight 0.10 – 0.16 g Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 500/7″ reel; 2000/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 4.2 mm pocket depth PCB washing Only pure water or alcohol recommended Part number1 Inductance2 (nH) Percent tolerance3 Q4 typ min Test freq. (MHz) SRF min5 (GHz) DCR max6 (mOhm) Irms7 (A) 1812SMS-22N_L_22 1812SMS-27N_L_27 1812SMS-33N_L_33 1812SMS-39N_L_39 1812SMS-47N_L_47 5,2 5,2 5,2 5,2 5,2 135100 135100 130100 135100 135100 150 150 150 150 150 3.2 2.7 2.5 2.1 2.1 4.2 4.0 4.8 4.4 5.6 3.0 3.5 3.0 3.0 3.0 1812SMS-56N_L_56 1812SMS-68N_L_68 1812SMS-82N_L_82 1812SMS-R10_L_100 1812SMS-R12_L_120 5,2 5,2 5,2 5,2 5,2 125100 120100 120100 115100 125100 150 150 150 150 150 1.5 1.5 1.3 1.2 1.1 6.2 8.2 9.4 12.3 17.3 3.0 2.5 2.5 1.7 1.5 1812SMS-R15_L_150 5,2 145100 150 0.75 33.0 1.2 1. When ordering, specify tolerance, termination and packaging codes: 1812SMS-R12GLC Tolerance:G =2% J = 5% Termination:L=RoHS compliant tin-silver (96.5/3.5) over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape, 500 parts per full reel. B =Less than full reel. In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked, 2000 parts per full reel. 2. Inductance tested at 150 MHz on an Agilent/HP 4286A LCR meter or equivalent with a Coilcraft SMD-A test fixture and correlation. 3. Tolerances in bold are stocked for immediate shipment. 4. Q tested at 150 MHz on an Agilent/HP 4291A Impedance Analyzer with an Agilent/HP 16193 test fixture or equivalents. 5. SRF tested on the Agilent/HP 8753D Network Analyzer or equivalent and a Coilcraft CCF1248 test fixture. 6. DCR tested on the Cambridge Technology Model 510 Micro-ohmmeter or equivalent. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. For part marking data see www.coilcraft.com/colrcode.cfm. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 184-1 Revised 05/18/12 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information. Document 184-2 Designer’s Kit C318 contains 12 each of all 5% values. Designer’s Kit C318-2 contains12 each of all 2% values. Midi Spring Air Core Inductors ® Typical L vs Frequency Typical Q vs Frequency 250 250 200 200 22 nH 150 68 nH 100 39 nH 22 nH 50 0 1000 100 10 1 10000 Frequency (MHz) Q factor Inductance (nH) 120 nH 39 nH 150 68 nH 120 nH 100 50 0 10 1 100 Frequency (MHz) 1000 10000 Irms Derating 120 110 90 80 70 60 50 40 30 25°C Percent of rated Irms 100 20 10 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (°C) Dimensions are in US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] inches mm Document 184-2 Revised 05/18/12 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information.