Document 295 -1 SMT Power Inductors - DO3314 • Only 3.3 mm square, 1.4 mm high! • Handles current up to 1.7 Amps rms Designer’s Kit C358 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 45.9 – 50.2 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Part number1 DO3314-102ML_ DO3314-152ML_ DO3314-222ML_ DO3314-332ML_ DO3314-472ML_ DO3314-682ML_ DO3314-822ML_ DO3314-103ML_ DO3314-153ML_ DO3314-223ML_ DO3314-333ML_ L2 DCR3 SRF4 ±20%max typ Isat5 Irms6 (µH) (Ohms)(MHz) (A) (A) 1.0 0.11 160 2.101.70 1.5 0.14 140 2.001.40 2.2 0.20 90 1.601.30 3.3 0.26 80 1.401.20 4.7 0.32 60 1.201.10 6.8 0.44 45 0.920.80 8.2 0.47 45 0.900.75 10 0.52 40 0.800.75 15 0.86 30 0.680.65 22 1.20 20 0.560.50 33 1.62 15 0.510.40 1. When ordering, please specify termination and packaging codes: DO3314-333MLC Termination: L = RoHS compliant silver-palladium-platinum-glass frit Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4191A or equivalent. 5. DC current at which the inductance drops 10% (typ) from its value without current. 6. Current that causes a 40°C temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 295-1 Revised 10/08/08 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 295-2 SMT Power Inductors - DO3314 Series Typical L vs Frequency Typical L vs Current 100 100 33 µH 10 µH 10 Inductance (µH) Inductance (µH) 33 µH 3.3 µH 1 µH 1 0.1 0.01 1 0.1 10 10 10.0 µH 3.3 µH 1.0 µH 1 0.1 0.01 10 Current (A) Irms Derating XXX Y Internal code 120 110 100 90 80 0.130 ±0.008 3,3 ±0,2 Dash number 70 0.130 ±0.008 3,3 ±0,2 60 50 0.055 max 1,4 40 25°C Percent of rated Irms 1 0.1 Frequency (MHz) 30 0.024 0,61 Recommended Land Pattern 0.049 1,24 20 10 0 -40 -20 0 20 40 60 80 100 0.025 0,64 120 140 Ambient temperature (°C) 0.040 ±0.005 1,02 ±0,127 Dimensions are in inches mm US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] 0.148 3,76 0.050 1,27 0.148 3,76 Document 295-2 Revised 10/08/08 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.