COILCRAFT DO3340P

Document 171-1
SMT Power Inductors – DO3340P
• Excellent current handling – up to 3.5 Arms with an 8 A saturation
current rating for a 10 µH part.
Designer’s Kit C310 contains 3 of each part
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant gold over nickel over phos bronze.
Other terminations available at additional cost.
Weight 1.8 – 2.8 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+105°C with derated current
Storage temperature Component: –40°C to +105°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 225 per 13″ reel Plastic tape: 24 mm wide,
0.4 mm thick, 24 mm pocket spacing, 11.4 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
L DCRSRF
Part ±20%2
max typ Isat3 Irms4
number1
(µH) (Ohms)(MHz) (A) (A)
DO3340P-103ML_ 10
DO3340P-153ML_ 15
DO3340P-223ML_ 22
DO3340P-333ML_ 33
DO3340P-473ML_ 47
DO3340P-683ML_ 68
DO3340P-104ML_100
DO3340P-154ML_150
DO3340P-224ML_220
DO3340P-334ML_330
DO3340P-474ML_470
DO3340P-684ML_680
DO3340P-105ML_1000
0.04035 8.03.5
0.05018 7.03.0
0.06613 5.52.5
0.08011 4.02.0
0.110 9.0 3.81.6
0.17 7.0 3.01.2
0.22 5.5 2.5 1.2
0.34 4.5 2.0 0.9
0.44 3.5 1.6 0.7
0.70 3.0 1.2 0.6
0.95 2.5 1.0 0.3
1.15 2.0 1.0 0.2
2.0
1.5 0.8 0.1
1. When ordering, please specify termination and packaging codes:
DO3340P-105MLD
Termination: L= RoHS compliant gold over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging:D
=13″ machine-ready reel. EIA-481 embossed plastic
tape (225 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP
4263B LCR meter or equivalent.
3. DC current at which inductance drops 10% (typ) from its value without
current.
4. Current that causes a 20°C temperature rise from 25°C ambient
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 171-1 Revised 01/12/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 171-2
SMT Power Inductors – DO3340P Series
Typical L vs Frequency
Typical L vs Current
10000
10000
1000 µH
100 µH
100
10 µH
10
1
0.01
1000 µH
1000
Inductance (µH)
Inductance (µH)
1000
100 µH
100
10 µH
10
1
0.1
10
1
0.1
100
10
1
Current (A)
Frequency (MHz)
Irms Derating
0.510
max*
12,95
Internal code
Dash number
120
90
80
0.333
typ
8,47
70
60
an additional 0.01/0,254
* Allow
in length and 0.005/0,127 in
0.450
max*
11,43
50
height for optional tin-lead and
tin-silver-copper application.
40
30
20
0
-40
-20
0
20
40
60
80
100
Recommended
Land Pattern
0.145
3,69
0.100
2,54
10
Finish
Part marking since Feb. 2005.
Parts manufactured prior to that
date may have color dots. Visit
www.coilcraft.com/colrpowr.cfm
for color dot marking details.
25°C
Percent of rated Irms
Start
X
0.370
max
9,40
100
XXX
110
0.405
10,29
0.110
2,79
120
Ambient temperature (°C)
0.300
7,62
Dimensions are in
0.100
2,54
0.115
2,92
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 171-2 Revised 01/12/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.