Document 585-1 Shielded Power Inductors – LPS5015 • Very low DCR; excellent current handling • 5.0 × 5.0 mm footprint; less than 1.5 mm tall Designer’s Kit C350 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Weight 102 – 107 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Isat (A)5 Irms (A)6 DCR SRF 2 3 4 Inductance max typ 10% 20% 30% 20°C40°C Part number1 ±20% (µH) (Ohms)(MHz) drop drop drop rise rise LPS5015-102MR_ 1.0 0.050 1833.63.83.91.90 2.65 LPS5015-132MR_ 1.3 0.065 1502.52.62.81.70 2.35 LPS5015-182MR_ 1.8 0.075 1282.62.82.91.50 2.15 LPS5015-222MR_ 2.2 0.090 1162.42.62.71.40 2.00 LPS5015-332MR_ 3.3 0.125881.92.02.01.30 1.80 LPS5015-472MR_ 4.7 0.150731.61.71.81.20 1.62 LPS5015-562MR_ 5.6 0.175671.61.61.61.10 1.45 LPS5015-682MR_ 6.8 0.225571.31.41.50.90 1.25 LPS5015-822MR_ 8.2 0.280491.31.31.40.85 1.05 LPS5015-103MR_ 10 0.300441.21.31.30.80 0.95 LPS5015-123MR_ 12 0.350401.01.11.20.75 0.84 LPS5015-153MR_ 15 0.360 38 0.800.840.860.730.84 LPS5015-183MR_ 18 0.550 35 0.750.770.800.700.83 LPS5015-223MR_ 22 0.675 31 0.700.730.750.600.82 LPS5015-333MR_ 33 0.750 24 0.550.590.600.500.70 LPS5015-473MR_ 47 1.00 18 0.460.480.490.450.57 LPS5015-563MR_ 56 1.13 17 0.400.430.450.400.52 LPS5015-683MR_ 68 1.45 15 0.330.380.390.350.47 LPS5015-104MR_ 100 1.95 12 0.300.330.340.300.42 LPS5015-124MR_ 120 2.50 10 0.250.280.300.270.37 LPS5015-154MR_ 150 3.40 9.3 0.230.250.260.250.33 LPS5015-224MR_ 220 4.50 7.3 0.200.210.220.220.29 LPS5015-334MR_ 330 7.40 5.7 0.150.170.180.170.22 LPS5015-474MR_ 470 7.50 4.9 0.120.120.130.160.21 LPS5015-564MR_ 560 8.50 4.3 0.100.110.120.140.190 LPS5015-684MR_ 680 10.6 4.0 0.100.110.110.130.175 LPS5015-105MR_ 1000 15.0 3.20.0800.0900.0930.10 0.150 LPS5015-155MR_ 1500 25.0 2.50.0800.0860.0880.0900.140 LPS5015-185MR_ 1800 28.0 2.20.0780.0830.0860.0850.130 LPS5015-225MR_ 2200 36.0 2.10.0720.0780.0800.0650.090 1. Please specify termination and packaging codes: LPS5015-335MRC Termination:R=RoHS compliant matte tin over nickel over silver. Special order, added cost: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37). Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape 1000 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 585-1 Revised 08/01/13 © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 585-2 Shielded Power Inductors – LPS5015 Series Typical L vs Frequency Typical L vs Current 10000 10000 3300 µH 3300 µH 1000 µH 330 µH 100 µH 100 33 µH 10 µH 10 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 330 µH 100 µH 100 33 µH 10 µH 10 3.3 µH 3.3 µH 1 0.01 1 0.1 10 Frequency (MHz) Typical Current Derating 1 0.01 XXX X 90 80 70 Dash number 60 50 40 10 0 25°C Percent of rated current 100 20 Isat Irms -40 -20 0 20 Current (A) 10 0.189 ±0.003* 4,80 ±0,076 Winding direction 0.0551 ±0.004 * 1,4 ±0,1 Recommended Land Pattern Internal code 0.060 1,50 40 1 0.189 ±0.003* 4,80 ±0,076 120 110 30 0.1 60 80 100 120 140 0.134 3,40 0.039 typ 1,00 Ambient temperature (°C) 0.197 5,00 0.0665 1,689 NOTE NEW PART ORIENTATION Parts are rotated 90° in the packaging tape compared to previous versions of this product. NEW OLD 123 123 123 123 123 0.134 3,40 0.060 0.039 typ 1,00 Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth 0.134 3,40 1,52 are of the case not including * Dimensions the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. For optional tin-lead and tin-silver-copper terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch / 0,13 mm). 0.134 3,40 0.197 5,00 Dimensions are in inches mm 123 US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 585-2 Revised 08/01/13 © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.