COILCRAFT LPS5030

Document 581-1
Shielded Power Inductors – LPS5030
• Very low DCR; excellent current handling
• 4.9 × 4.9 mm footprint; less than 3 mm tall
Designer’s Kit C420 contains 3 each of all values
Core material Ferrite
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 226 – 244 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide,
0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth
Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Isat (A)5 Irms (A)6
DCR SRF
Inductance2 max3 typ4 10% 20% 30% 20°C40°C
Part number1 ±20% (µH) (Ohms)(MHz) drop drop drop rise rise
LPS5030-901ML_ 0.90 0.040
2503.84.04.12.10
2.80
LPS5030-122ML_ 1.2 0.043
2103.53.63.72.00
2.65
LPS5030-172ML_ 1.7 0.051
1903.03.23.31.90
2.50
LPS5030-222ML_ 2.2 0.057
1682.93.13.21.60
2.15
LPS5030-332ML_ 3.3 0.066
1252.32.52.61.40
1.80
LPS5030-472ML_ 4.7 0.083841.92.02.01.30
1.75
LPS5030-562ML_ 5.6 0.089701.81.81.91.25
1.65
LPS5030-682ML_ 6.8 0.099561.61.71.71.20
1.60
LPS5030-822ML_ 8.2 0.125451.61.71.71.10
1.55
LPS5030-103ML_ 10.0 0.127301.41.41.41.00
1.50
LPS5030-123ML_ 12.0 0.155241.31.41.40.95
1.40
LPS5030-153ML_ 15.0 0.160 32 0.800.900.900.921.40
LPS5030-183ML_ 18.0 0.170 27 0.800.820.870.901.30
LPS5030-223ML_ 22.0 0.190 24 0.700.750.780.881.25
LPS5030-333ML_ 33.0 0.260 19 0.600.630.640.851.20
LPS5030-473ML_ 47.0 0.330 16 0.500.530.550.751.00
LPS5030-683ML_ 68.0 0.440 12 0.400.430.440.650.900
LPS5030-823ML_ 82.0 0.470 11 0.380.400.400.600.830
LPS5030-104ML_ 100
0.600 10 0.270.310.320.550.750
LPS5030-124ML_ 120
0.800 9 0.260.290.300.450.660
LPS5030-154ML_ 150
0.860 7.50.220.250.263
0.420.570
LPS5030-224ML_ 220
1.35
6.0 0.21 0.2350.2450.36 0.500
LPS5030-334ML_ 330
1.80
5.0 0.1550.1550.2000.32 0.420
LPS5030-474ML_ 470
2.80
4.0 0.1170.1340.1460.28 0.370
LPS5030-564ML_ 560
3.20
3.6 0.1100.1300.1400.23 0.320
LPS5030-684ML_ 680
3.80
3.0 0.1000.1200.1260.20 0.290
LPS5030-105ML_ 1000
5.10
2.5 0.1000.1100.1100.18 0.250
LPS5030-155ML_ 1500
7.60
2.0 0.0680.0800.0890.15 0.210
LPS5030-185ML_ 1800
10.0
1.8 0.0690.0810.0860.13 0.170
LPS5030-225ML_ 2200
11.0
1.6 0.0630.0740.0800.10 0.150
LPS5030-335ML_ 3300
19.5
1.3 0.0560.0630.0670.0900.125
LPS5030-475ML_ 4700
26.0
1.1 0.0490.0560.0590.0800.110
1. Please specify termination and packaging codes:
LPS5030-105MLC
Termination:L=RoHS compliant silver-palladiumplatinum-glass frit.
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tinlead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481
embossed plastic tape (750 parts
per full reel).
B=Less than full reel. In tape, but not
machine ready.
To have a leader and trailer added
($25 charge), use code letter C
instead.
D
=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (2500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4192A impedance analyzer or equivalent.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at which the inductance drops the specified
amount from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 581-1 Revised 01/23/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 581-2
Shielded Power Inductors – LPS5030 Series
Typical L vs Frequency
Typical L vs Current
10000
10000
3300 µH
3300 µH
1000 µH
330 µH
100 µH
100
33 µH
10 µH
10
1000 µH
1000
Inductance (µH)
Inductance (µH)
1000
330 µH
100 µH
100
33 µH
10 µH
10
3.3 µH
3.3 µH
1
0.01
1
0.1
10
Frequency (MHz)
Typical Current Derating
1
0.01
0.1
1
10
0.189 ±0.003*
4,80 ±0,076
120
110
0.189 ±0.003*
4,80 ±0,076
100
XXX X
90
80
70
Dash
number
60
Winding
direction
Internal
code
50
0.114 ±0.004 **
2,9 ±0,1
40
30
20
10
0
25°C
Percent of rated current
Current (A)
Isat
Irms
-40
-20
0
20
Recommended
Land Pattern
0.060
1,50
40
60
80
100
0.134
3,40
120 140
Ambient temperature (°C)
0.039 typ
1,00
0.217
5,51
0.0665
1,689
0.134
3,40
0.134
3,40
0.060
0.039 typ
1,00
1,52
are of the case not
* Dimensions
including the termination. For maximum
overall dimensions including the
termination, add 0.005 in / 0,13 mm.
0.134
3,40
0.217
5,51
optional tin-lead and tin-silver-copper
**For
terminations, dimensions are for the
mounted part. Dimensions before mounting
can be an additional 0.005 inch (0,13 mm).
Dimensions are in
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 581-2 Revised 01/23/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.