0805 CHIP INDUCTORS Chip Inductors for Critical Applications ST336RAB ■ Ferrite core surface mount inductors ■ Lower DCR and higher current ratings than other 0805 Series. ■ Available in inductance values from 0.078 to 27 µH, all at 2% and 5% tolerance. Inductance2 Percent SRF min4 DCR max5 Imax Q min3 (MHz) (Ohms)(A) Part number1 (µH)tolerance ST336RAB78N_LZ 0.078 @ 7.9 MHz ST336RAB111_LZ 0.110 @ 7.9 MHz ST336RAB471_LZ 0.470 @ 7.9 MHz ST336RAB681_LZ 0.680 @ 7.9 MHz ST336RAB102_LZ 1.0 @ 7.9 MHz ST336RAB122_LZ 1.2 @ 7.9 MHz ST336RAB152_LZ 1.5 @ 7.9 MHz ST336RAB182_LZ 1.8 @ 7.9 MHz ST336RAB222_LZ 2.2 @ 7.9 MHz ST336RAB272_LZ 2.7 @ 7.9 MHz ST336RAB332_LZ 3.3 @ 7.9 MHz ST336RAB392_LZ 3.9 @ 7.9 MHz ST336RAB472_LZ 4.7 @ 7.9 MHz ST336RAB682_LZ 6.8 @ 7.9 MHz ST336RAB822_LZ 8.2 @ 2.5 MHz ST336RAB103_LZ 10.0 @ 2.5 MHz ST336RAB153_LZ 15.0 @ 2.5 MHz ST336RAB223_LZ 22.0 @ 2.5 MHz ST336RAB273_LZ 27.0 @ 2.5 MHz 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 1.When ordering, specify tolerance, termination and testing codes: ST336RAB273GLZ Tolerance: G=2% J = 5% Termination:L=RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Testing:Z =COTS H=Screening per Coilcraft CP‑SA‑10001 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ HP 4286A impedance analyzer or equivalent with Coilcraft-provided correlation pieces. 3. Q measured on an Agilent/HP 4291A with an Agilent/HP 16197 test fixture or equivalents. 4. SRF measured using an Agilent/HP 8753ES network analyzer or equivalent with a Coilcraft SMD-D test fixture. 5. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a Coilcraft CCF858 test fixture. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. ® 1440 1200 500 400 340 280 275 246 106 105 83 52 50 35 27 21 17 13 11 0.042 0.05 0.31 0.46 0.69 1.20 1.03 1.15 1.28 1.48 1.57 1.70 1.87 2.25 2.55 3.45 5.03 6.18 11.04 2.0 2.0 0.720 0.590 0.500 0.400 0.490 0.410 0.365 0.350 0.330 0.300 0.280 0.260 0.250 0.200 0.180 0.150 0.120 Core material Ceramic/Ferrite Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Ambient temperature –40°C to +85°C with Irms current, +85°C to +100°C with derated current Storage temperature Component: –55°C to +100°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +100 to +255 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Packaging 2000 per 7″ reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 19 @ 7.9 MHz 19 @ 7.9 MHz 19 @ 7.9 MHz 20 @ 7.9 MHz 20 @ 7.9 MHz 15 @ 7.9 MHz 20 @ 7.9 MHz 20 @ 7.9 MHz 20 @ 7.9 MHz 20 @ 7.9 MHz 20 @ 7.9 MHz 20 @ 7.9 MHz 20 @ 7.9 MHz 20 @ 7.9 MHz 18 @ 2.5 MHz 18 @ 2.5 MHz 18 @ 2.5 MHz 18 @ 2.5 MHz 15 @ 2.5 MHz Document ST288-1 Revised 06/01/11 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com 0805 CHIP INDUCTORS ST336RAB Series (0805) Typical L vs Frequency Typical Q vs Frequency Irms Derating B overall Pick and place material F 120 110 G A 100 F I D E terminal 80 70 I J 90 Terminal wraparound: approx 0.010/0,25 both ends Suggested Recommended Land Pattern 60 50 ABCD maxmaxmax ref E F G H IJ 0.0900.0750.0630.0200.0500.0200.0400.0700.0400.030inches 2,291,911,600,511,270,511,021,781,020,76 mm 40 30 25°C Percent of rated Irms H C 20 Note: Dimensions are before optional solder application. For maximum overall dimensions including solder, add 0.0025 in / 0,064 mm to B and 0.006 in / 0,15 mm to A and C. 10 0 -40 -20 0 20 40 60 80 100 120 Ambient temperature (°C) ® Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 Document ST288-2 Revised 06/01/11 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com