Document 887-1 RE U T A R E P M E T HIGH Shielded Power Inductors – XAL60xx • High current; very low DCR; soft saturation • AEC-200 Grade 1 qualified (–40°C to +125°C ambient) Designer’s Kit C442 contains 3 each of all values. Core material Composite Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other terminations available at additional cost. Ambient temperature –40°C to +125°C with Irms current, +125°C to +165°C with derated current. Storage temperature Component: –40°C to +165°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging XAL6030 400/7″reel; 1500/13″ reel Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 3.12 mm pocket depth XAL6060 250/7″ reel; 750/13″ reel Plastic tape: 16 mm wide, 0.3 mm thick, 8 mm pocket spacing, 6.23 mm pocket depth PCB washing Only pure water or alcohol recommended DCR (mOhms)3 Irms (A)6 Inductance2 SRF typ4 Isat5 Part number1 ±20% (µH) typ max (MHz) (A) 20°C rise 40°C rise XAL6030-181ME_ 0.18 1.591.75 141 39.0 24 32 XAL6030-331ME_ 0.33 2.302.53 89 30.0 20 25 XAL6030-561ME_ 0.56 3.013.31 61 29.0 17 22 XAL6030-102ME_ 1.0 5.626.18 50 23.0 13 18 XAL6030-122ME_ 1.2 6.827.50 43 22.0 12 16 XAL6030-182ME_ 1.8 9.5710.52 34 18.2 10 14 XAL6030-222ME_ 2.2 12.7013.97 30 15.9 7.0 10 XAL6030-332ME_ 3.3 19.9220.81 26 12.2 6.0 8.0 XAL6060-472ME_ 4.7 13.1014.40 21 10.5 8.0 11 XAL6060-562ME_ 5.6 14.4615.90 20 9.9 7.5 10 XAL6060-682ME_ 6.8 18.9020.80 18 9.2 7.0 9.0 XAL6060-822ME_ 8.2 24.00 26.40 16 8.4 6.0 8.0 XAL6060-103ME_ 10 27.0029.82 14 7.6 5.0 7.0 XAL6060-153ME_ 15 39.7743.75 11 5.8 4.5 6.0 XAL6060-223ME_ 22 55.1260.63 9 5.6 3.6 5.0 Irms Testing Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. 1. When ordering, please specify termination and packaging codes: XAL6060-223MEC Termination:E=RoHS compliant tin-silver over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape. B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at which the inductance drops 30% (typ) from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 887-1 Revised 11/20/12 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information. Document 887-2 URE T A R E P M E T HIGH Shielded Power Inductors – XAL60xx 0.20 Inductance (µH) 0.30 0.25 0.18 µH 0.15 0.10 0.05 0 0 5 10 15 20 Current (A) 25 30 35 40 Inductance (µH) 0.6 0.5 0.4 0.33 µH 0.3 0.2 0.1 0 0 5 10 15 20 Current (A) 25 30 35 40 Inductance (µH) 0.8 0.6 0.56 µH 0.4 0.2 0 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 Current (A) 25 30 35 40 Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) L vs Current 1.0 µH 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Current (A) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 1.2 µH 0 2 4 6 10 12 14 16 18 20 22 24 26 28 30 8 Current (A) 2.4 2.0 1.6 1.2 1.8 µH 0.8 0.4 0 0 2 4 6 10 12 14 16 18 20 22 24 26 28 30 8 Current (A) 3.0 2.5 2.0 2.2 µH 1.5 1.0 0.5 0 0 2 4 6 8 10 12 14 16 18 20 12 14 16 18 20 Current (A) 5 4 3 3.3 µH 2 1 0 0 2 4 US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] 6 8 10 Current (A) Document 887-2 Revised 11/20/12 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information. Document 887-3 URE T A R E P M E T HIGH Shielded Power Inductors – XAL60xx 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 6 7 Current (A) 8 9 10 11 12 5.6 µH 0 1 2 3 4 5 6 7 Current (A) 8 9 10 11 12 10 8 6 6.8 µH 4 2 0 Inductance (µH) Inductance (µH) 4.7 µH Inductance (µH) 8 7 6 5 4 3 2 1 0 Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) L vs Current 1 2 3 4 5 6 7 Current (A) 8 9 10 11 12 16 12 10 µH 8 4 0 0 1 2 3 4 5 6 7 Current (A) 8 9 10 20 16 12 15 µH 8 4 0 0 1 2 3 4 Current (A) 5 6 7 8 5 6 7 8 30 25 20 22 µH 15 10 5 0 0 1 2 3 4 Current (A) 12 10 8 8.2 µH 6 4 2 0 0 1 2 3 4 5 6 Current (A) 7 8 9 10 US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 887-3 Revised 11/20/12 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information. Document 887-4 URE T A R E P M E T HIGH Shielded Power Inductors – XAL60xx Typical L vs Frequency 0.250 ±0.008 6,36 ±0,2 100 22 µH 15 µH Inductance (µH) 5.6 µH 4.7 µH 3.3 µH 2.2 µH 1.8 µH 1.2 µH 1.0 µH 10 1 XXX 10 µH 0.258 ±0.008 6,56 ±0,2 Dash number See height table 0.56 µH A ±0.008 in ±0,20 mm (in / mm) 0.213 / 5.42 0.213 / 5.42 0.213 / 5.42 0.206 / 5.24 0.206 / 5.24 0.204 / 5.18 0.201 / 5.12 0.200 / 5.08 0.204 / 5.18 0.204 / 5.18 0.204 / 5.18 0.201 / 5.12 0.201 / 5.12 0.200 / 5.08 0.200 / 5.08 Dash number -181 -331 -561 -102 -122 -182 -222 -332 -472 -562 -682 -822 -103 -153 -223 0.33 µH 0.1 0.1 10 1 0.159 4,04 0.049 ±0.002 1,25 ±0,05 0.18 µH B (in / mm) 0.224 / 5.69 0.224 / 5.69 0.224 / 5.69 0.213 / 5.42 0.213 / 5.42 0.210 / 5.33 0.206 / 5.24 0.204 / 5.18 0.210 / 5.33 0.210 / 5.33 0.210 / 5.33 0.206 / 5.24 0.206 / 5.24 0.204 / 5.18 0.204 / 5.18 100 Frequency (MHz) A (see table) B (see table) Irms Derating 120 0.110 ±0.01 2,79 ±0,25 110 0.056 1,43 Recommended Land Pattern 90 80 XAL6030 XAL6060 70 Maximum height 0.122 / 3,1 0.240 / 6,1 60 Weight 0.60 – 0.70 g 1.2 – 1.3 g Dimensions are in inches mm 50 40 25°C Percent of rated Irms 100 30 20 10 0 -40 -20 0 20 40 60 80 100 120 140 160 180 Ambient temperature (°C) US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 887-4 Revised 11/20/12 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information.