QorIQ Multicore Processor Development P1020/P1011 Reference Design Board Overview The QorIQ P1020 reference design board (RDB) can help shorten your time to market for networking, wired and wireless access, industrial and medical applications. The costeffective, highly integrated board is based on the QorIQ P1020 processor and leading-edge external components to help you quickly design and implement your target application. The P1020RDB leverages the P1020 processor and supports both the dual-core P1020 and single-core P1011 configurations. The P1020 processor family is based on the e500 core, built on Power Architecture® technology, which has a core frequency range of 533–800 MHz, and supports a 32 KB instruction and L1 data cache as well as a shared 256 KB frontside cache. The P1020 also supports three Gigabit Ethernet controllers with IEEE® 1588 v2 support, USB 2.0, up to two PCI Express® 1.0a controllers, up to two SGMII SerDes interfaces, 32-bit DDR2/3 with ECC, SPI controller supporting booting from SPI serial flash memory, SD/MMC card controller supporting booting from flash cards and an integrated security engine. The P1020, built in 45 nm process technology, provides high integration that simplifies board design and offers a costeffective solution. The P1020RDB platform features 1 GB unbuffered DDR3 SDRAM, 16 MB NOR flash and 32 MB NAND flash, where the platforms can boot from either NOR or NAND flash memory. It supports six Gigabit-capable ports via an SGMII PHY, an RGMII PHY and an on-board switch with four ports, as well as two ports of USB On-the-Go (OTG), four FXS ports and one FXO port via relay. The P1020RDB also supports a PCI Express add-in connector and a MiniPCI Express P1020RDB Board Features System Integration • Dual I2C slot, as well as an SD/MMC card slot. These Memory components, integrated with the P1020, • 1 GB DDR3 • SD/MMC card slot • 16 MB (128 MB device) NOR flash memory • Dual USB application design. In addition, the P1020RDB • 32 MB NAND flash memory • Mini AB connectors on I/O panel (default) provides a simplified migration path for existing • 16 MB SPI ROM • UARTs PCI Express interconnects • One DB9 connector • One standard PCI Express connector (x1) • Dual SLIC for FXS/FXO interfaces • One mini PCI Express connector (x1) Mini-ITX Form Factor provide an application-specific platform that can help you get a jump start on your next PowerQUICC processor customers wishing to migrate to QorIQ multicore processors. Customers can migrate to the single-core P1011 as a stepping stone on their way to multicore processing. • 170 mm x 170 mm Since the P1020 is pin-compatible with Ethernet the P2020, the P1020RDB can also Six 10/100/1000 ports: be used as a development vehicle for the P2020. Along with hardware support, the P1020RDB comes with a board support package (BSP) that includes both U-boot and Linux® 2.6 operating system support. The platform is also • 6-layer PCB routing (4-layer signals, to eTSEC1 • One SGMII PHY connected to eTSEC2 Lead-Free (ROHS), CE and FCC Certification • One RGMII PHY connected to eTSEC3 Software Tools • Linux 2.6.x Kernel available with third-party software applications. IEEE® 1588 v2 To see demonstrations or to acquire details • Clock input from DAC/VCXO circuitry of Freescale’s third-party applications for this • Accessible via test header platform, please contact your local Freescale sales office. 2-layer power and ground) • Four ports from L2 switch connected • Cross compile and native GNU tool chain P1020RDB Block Diagram P1020RDB Block Diagram Clocking Security Acceleration (optional) XOR Mini USB Mini USB Power POR Configuration e500 Core 32 KB 32 KB L1 I-Cache L1 D-Cache 2x USB 2.0 8-bit MCU DDR2/DDR3 SDRAM Controller e500 Core 256 KB L2 Cache Reset PLD 32 KB 32 KB L1 I-Cache L1 D-Cache Enhanced Local Bus Controller (eLBC) Coherency Module x32 DDR3 Discrete NAND Flash NOR Flash System Bus DB9 RS-232 Serial RJ45 RGMII PHY RJ45 RJ45 RGMII RGMII RJ45 RJ45 DUART eTSEC SPI 3 x Gigabit Ethernet eTSEC 5-port Switch eSDHC On-Chip Network PCI Express® PCI Express 4-ch. DMA 4-lane SerDes EEPROM SD/MMC JTAG/COP I2C IEEE® 1588 Real-Time EEPROM Clock HDR Not Connected RJ45 Dual SLIC PCI Express MiniPCI Express PCI Express For more information, visit freescale.com/QorIQ Freescale, the Freescale logo, PowerQUICC and QorIQ are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org. © Freescale Semiconductor, Inc. 2012. Document Number: P1020RDBFS REV 1 RJ11 TDM SGMII PHY DAC VCXO RJ11 RJ11 RJ11 RJ11