V-Basic Standard V15 Series Electromechanical Basic Switch DESCRIPTION Honeywell’s V-Basic Standard V15 series is an The V15 Series switch offers a wide range of standard electromechanical switch designed for enhanced reliability at a offerings, including a choice of actuators, electrical ratings, great value. This switch is often ideal for “low-cost-of-failure” – operating forces, and circuitry, and holds global approvals where the cost to replace the switch or to service any failure (ENEC, CQC, UL, cUL). related to the switch is minimal. The V15 is designed for applications requiring ≥ 100 g of operating force and electrical ratings ranging from 16A to 22A. FEATURES POTENTIAL APPLICATIONS • Broad range of electrical loads • Appliance • Straight, roller, simulated roller, and special actuators • Gaming • Special terminations available upon request • Vending machines • Precision operation and application versatility • Water heaters • Wide temperature range • Industrial controls • Global approvals (ENEC, CQC, UL, cUL) BENEFITS • Compatible with many applications due to the switches design flexibility, broad range of electrical loads, and actuators • Accepts insulated connections, most quick connect openings • Reliability, repeatability within range of conditions V-Basic Standard V15 Series Specifications Insulation resistance Dielectric strength Contact resistance Operating frequency - electrical Operating frequency – mechanical Operating speed Service life mechanical Service life electrical Storage temperature Storage humidity Micro disconnection (μ) Agency approvals ELECTRICAL CHARACTERISTICS Electrical rating 16 22 ≥ 100 mOhm (500 Vdc) 1000 Vac (50 Hz/60 Hz, 1 min.) 100 milliOhm max. 10 to 30 operations per minute 300 operations per minute max. 0,1mm - 1m/sec. 5 million cycles (operating force < 200 g); 1 million cycles (operating force > 200 g) 6000 or 50000 operations minimum -25 °C to 100 °C [-13 °F to 212 °F] 85 % RH max. < 3 mm contact gap ENEC, CQC, UL, cUL ENEC/CQC ; 16(4) A, 250 Vac (50000 cycles) UL/cUL ; 16½ HP, 125 Vac/250 Vac (6000 cycles) ENEC/CQC: 22(8 )A, 250 Vac (10000 cycles) UL/cUL: 22 A 1HP, 125 Vac/250Vac (6000 cycles) DIMENSIONS MOUNTING HOLE DIMENSIONS Metric mounting for Ø3 mm pins or screws USA mounting for #4 screws 2 www.honeywell.com/sensing Electromechanical Basic Switches CONNECTION DIMENSIONS C-style quick connect - 6,35 mm wide x 0,8 mm thick D-style quick connect - 4,80 mm wide x 0,8 mm thick E- style quick connect - 4,80 mm wide x 0,5 mm thick Honeywell Sensing and Control 3 V-Basic Standard V15 Series STANDARD LEVER OPTIONS Lever code/Description Outline dimensions A01/Straight short lever A02/Standard straight lever A03/Long straight lever A04/Simulated roller lever A05/Short roller lever A06/Roller lever 4 www.honeywell.com/sensing Electromechanical Basic Switches NOMENCLATURE TREE V15 T 16 C Z 200 A 01 XX K Switch type Temperature grade Electrical rating Terminal style Circuit code Operating force at pin plunger, max. Lever position Lever type Special designator Mounting holes T T125 ENEC/CQC: 16(4) A, 250 Vac 16 UL/cUL: 16½ HP 125 Vac/250 Vac C Quick connect H T150 ENEC/CQC: 22(8 )A, 250 Vac 22 UL/cUL: 22 A 1HP 125 Vac/250Vac D Quick connect V15 Series switch 6,30 mm x 0,80 mm [0.250 in x 0.032 in] 4,70 mm x 0,8 mm [0.187 in x 0.032 in] 4,70 mm x 0,5 mm [0.187 in x 0.020 in] E Quick connect Z SPDT 100 100 gf 0.98 N No lever pin plunger No lever pin plunger P SPSTNO 200 200 gf 1.96 N A Far from pin plunger 01 Short straight lever C SPSTNC 300 300 gf 2.94 N B Near pin plunger 02 Std. straight lever 400 400 gf 3.92 N 03 Long straight lever 04 Simulated roller lever A special designator letter is used only when terminal type is "X" or actuator/lever type is "99" to specify that the terminals or the actuator of the switch is special. Review product specification to determine the exact differences. Metric Ø3.1 mm K USA Ø2.9 mm 05 Roller lever 06 Long roller lever 99 Special lever ORDER GUIDE The V-Basics standard V15 series provide customers with the flexibility to request quotes FOB Hong Kong or FOB Freeport. In addition, drop shipments can be arranged to any location in Asia Pacific. • FOB Freeport orders will be entered using ICOM. Lead time 8 weeks. • FOB New House orders will be entered using SAP. Lead time 8 weeks. • FOB Hong Kong or drop shipments a special order request form will need to be submitted please contact your application engineer or product manager for details. Honeywell Sensing and Control 5 SALES AND SERVICE WARNING Honeywell serves its customers through a worldwide network of sales PERSONAL INJURY offices, representatives and distributors. For application assistance, DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: E-mail: [email protected] Internet: www.honeywell.com/sensing Phone and Fax: Asia Pacific WARNING +65 6355-2828 +65 6445-3033 Fax MISUSE OF DOCUMENTATION Europe • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 www.honeywell.com/sensing 004945-2-EN IL50 GLO Printed in USA October 2007 Copyright © 2007 Honeywell International Inc. All rights reserved.