HOA6480 Series Barcode Sensor Infrared Products DESCRIPTION The HOA6480 Series is a reflective barcode sensor that incorporates a VCSEL (Vertical Cavity Surface-emitting Laser) emitter and phototransistor detector in a custommolded plastic package. The VCSEL technology allows the sensor to operate with a very low drive current. The phototransistor drives an operational amplifier with an open-collector output, providing users with flexibility in their interface designs. • • • • • • FEATURES Class IIIB VCSEL Digital output Depth of field: 4,5 mm ±0,5 mm [0.180 in ±0.20 in] Focal length: 4,5 mm [0.180 in] Resolution: 0,254 mm [0.010 in] Choice of pin, wire or custom termination DANGER INVISIBLE LASER RADIATION AVOID DIRECT EXPOSURE TO BEAM PEAK POWER 5 mW WAVELENGTH 820-860 nm CLASS IIIb LASER PRODUCT The HOA6480 Series provides a digital output that allows it to be interfaced with most decoding equipment. The 4,5 mm [0.180 in] focal length allows measurement with no contact and the 0,254 mm [0.010 in] resolution works well in most barcode applications. The HOA6480 typical scan speed is 254,0 mm [10.0 in] per second. A choice of pin, wire or custom termination allows flexible interconnections and the reflective sensor configuration promotes easy mounting. POTENTIAL APPLICATIONS • Barcode verification in dispensing and processing equipment • Line or edge detection • Encoding • Data collection from manufacturing lines, robotic operations, production instrumentation/control units, automated sorting and screening equipment and analytical systems such as medical analysis. (Note that carbon black ink is required for this device to sense lines.) HOA6480 Series Barcode Sensor TESTING PROCESS Each HOA6480 Barcode Sensor is precisely tested using automated testing equipment and a custom fixture. The wheel rotates at 1 RPS (~254,0 mm [10.0 in] per second). Power, ground and output connections are applied to the sensor loaded into the test fixture. During the testing process, the test fixture holds each sensor at a distance of approximately 4,5 mm [0.180 in] from a rotating wheel with a diameter of 89,0 mm [3.5 in] and a height of 15,2 mm [0.600 in]. Custom software in the test system evaluates the duty cycle collected by the sensor and sets the desired duty cycle between 40 % and 60 %. The software then reads a sample barcode and verifies that an accurate and complete barcode signal has been collected. One half of the wheel consists of a 50 % duty cycle barcode of alternating black and white stripes of the same size (0,38 mm [0.015 in] wide and 16,2 mm [0.600 in] tall). The other half of the wheel has a sample barcode of a known value. REFLECTIVITY The sensor output will be below 1.1 V when presented with a 50 % reflective surface at 6,35 mm [0.250 in] (Kodak Grey Scale #3, CAT 152 7662). ELECTRICAL CHARACTERISTICS (25 ºC [77 ºF] unless otherwise noted) Parameter Min Typ. Max Unit Supply current – – 15 mA Voltage high 4.5 – – Vdc Voltage low – – 1.0 Vdc Voltage low (d=6,35 mm [0.250 in]) – – 1.1 Vdc Output short circuit (sourcing) Vo = 0 V 2 16 – mA Output short circuit (sinking) Vo = 5 V 20 60 – mA ABSOLUTE MAXIMUM RATINGS Operating temperature range Condition all black surface white surface 50 % reflective surface – – -40 ºC to 85 ºC [-40 ºF to 185 ºF] ELECTRICAL CONNECTIONS Vcc 5 Vdc Ground – Output open collector SCHEMATIC 7 NO CONNECTION 4 Vcc +5 V 1 GND 3 VCSEL 2 www.honeywell.com/sensing DET OUTPUT Infrared Products MOUNTING DIMENSIONS (For reference only mm/[in].) 10,16 [0.40] R 1,27 [0.05] 3,81 5,08 [0.15] [0.20] 13,46 [0.53] 13,46 [0.53] 7 NC 4 3 1 Vcc Vo GND 27,18 [1.07] 24,89 [0.98] 6,35 [0.25] 13,21 [0.52] 13,97 [0.55] 2,54 [0.10] 9,14 [0.36] 5,08 [0.20] 10,16 [0.40] R 1,52 [0.06] 8,89 [0.35] 13,97 [0.55] 27,94 [1.10] Honeywell Sensing and Control 3 ORDER GUIDE Catalog Listing Description HOA6480-001 HOA6480-002 Barcode sensor with pins Barcode sensor with 609,6 mm [24.0 in ] wires WARNING WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. SALES AND SERVICE Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: E-mail: [email protected] Internet: www.honeywell.com/sensing Phone and Fax: Asia Pacific +65 6355-2828 +65 6445-3033 Fax Europe +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax Automation and Control Solutions Sensing and Control Honeywell 11 West Spring Street Freeport, Illinois 61032 www.honeywell.com/sensing 006472-1-EN IL50 GLO Printed in USA June 2005 © 2005 Honeywell International Inc.