RS1 and RS2 Rocker Switch Modules W NE Button Housing and Rocker Connections Main features of K12 Function RS1 RS2 Operating life Operating temperature Storage temperature Protection class Graphics on the labels The rocker switch modules as standard version are also sold in small quantities. For further technical details and specific applications, please contact ITT Cannon Switch Products. RS2 Rocker Switch Module (shown) [.724] [1.61] [1.43] [.118] [.622] [.0197] Dimensional Drawings · Dimensions in mm [inch] [.0591] Rubber sealing Adapter Frame Screw [1.60] [1.02] [1.26] [1.18] Shown without sealing [.492] [1.17] Button Bezel Mounting block [1.38] [.591] The rocker switch modules consist of O RS1: 2 K12 switches RS2: 4 K12 switches O Rocker O PC board The button of the rocker switch can be designed according to customer’s requirements. The available button KRSA can be delivered separately or mounted. In the drawing, you’ll find a standard PC board with respective dimensions. According to the design IP 67 according to DIN/ISO 529 is possible (dust tight and protected against the effects of immersion in water). Also, the graphics on the labels of the rocker switch modules can be designed according to customer’s requirement. Standard graphics with arrows are available: see above photo. Material [.278] RS2 With the RS2 a double switch function is available in each of the two directions. Proven applications of the RS2 include car windows, machine control units and locomotives. RS1 with two K12 switches RS2 with four K12 switches RS1: 43 3 40 3 27 mm RS2: 43 3 41 3 30 mm PBT PC/ASA-Blend Connectors soldered, screwed or plugged in Tactile feedback, positive snap-point (further details of the K12 key switch see K12 section) 1 make contact per direction (two functions maximum) 2 make contacts per direction (four functions maximum) ^ 106 operations – 25°C to + 85°C – 40°C to + 85°C With sealing: IP 67 acc. to DIN/IEC 529. Dust tight and protected against the effects of immersion in water in the button area. Upon request Dimensions (length, width, height) [.0394] RS1 This module has 2 functions consisting of two directional movements. Technical data 2 types [.866] The two rocker switch modules RS1 and RS2 are designed to be installed into equipment, panels, multi-function grips or other switching units. 26] [[ .1 [1.03] [1.46] [1.69] Ordering code Example: 1 1 RS1 Designation: RS1, RS2 (button mounted) E-7