Features ICE Technology* Description ● ● ● ● ● ● ● ● ● ● ● ● Tx Temperature Range without Derating 120°C Maximum Case Temperature -45°C Minimum Temp. EN 50155 Compliant EN 50121-3-2 Compliant CE Marked 24, 48 and 110VDC Input Ranges Six Sided Shielded Enclosure Flat, Ribbed or Baseplate Case Styles Efficiency to >89% Isolated and Fully Protected Outputs Low Quiescent Current The RPR50 series DC/DC converters are designed for railway rolling stock applications. Besides covering all the input voltages from 24VDC up to 110VDC, the converters have a very wide operating temperature range of -45°C to +85°C. Although the case size is very compact, the converter contains a built-in Class A EMI filter, so few external components are required. The RPR50 is available in three case styles: a low profile flat top case, a ribbed case with a built-in heatsink and the baseplate case for high vibration or bulkhead-mounting applications. They are EN 50155 and EN 50121-3-2 compliant. POWERLINE+ Railway-Converter with 3 year Warranty 50 Watt Single & Dual Output Selection Guide 24V, 48V and 110V Input Types Part Number Nominal Input VDC Nom. Input Range VDC Lockout Voltage VDC Output Voltage VDC Output Current mA RPR50-243.3S** 24 12-36V 8.5V 3.3 15000 RPR50-2405S** 24 12-36V 8.5V 5 10000 RPR50-2412S** 24 12-36V 8.5V 12 4100 RPR50-2415S** 24 12-36V 8.5V 15 3300 RPR50-2424S** 24 12-36V 8.5V 24 2100 RPR50-483.3S** 48 25-75 17.5 3.3 15000 RPR50-4805S** 48 25-75 17.5 5 10000 RPR50-4812S** 48 25-75 17.5 12 4100 RPR50-4815S** 48 25-75 17.5 15 3300 RPR50-4824S** 48 25-75 17.5 24 2100 RPR50-1103.3S** 110 40-160 36 3.3 15000 RPR50-11005S** 110 40-160 36 5 10000 RPR50-11012S** 110 40-160 36 12 4100 RPR50-11015S** 110 40-160 36 15 3300 RPR50-11024S** 110 40-160 36 24 2100 RPR50-2412D** 24 12-36V 8.5V ±12 ±2100 RPR50-2415D** 24 12-36V 8.5V ±15 ±1650 RPR50-2424D** 24 12-36V 8.5V ±24 ±1050 RPR50-4812D** 48 25-75 17.5 ±12 ±2100 RPR50-4815D** 48 25-75 17.5 ±15 ±1650 RPR50-4824D** 48 25-75 17.5 ±24 ±1050 RPR50-11012D** 110 40-160 36 ±12 ±2100 RPR50-11015D** 110 40-160 36 ±15 ±1650 RPR50-11024D** 110 40-160 36 ±24 ±1050 ** add suffix “-F“ for low profile Flat case or “-B“ for Baseplate case and no suffix is the Ribbed case. add “1“ before suffix for neg. CTRL logic e.g. -1, -1B, -1F, etc. RoHS 2002/95/EC 6/6 EN-50155 Certified EN-60950 Certified RPR50 * ICE Technology ICE (Innovation in Converter Excellence) uses state-ofthe-art techniques to minimise internal power dissipation and to increase the internal temperature limits to extend the ambient operating temperature range to the maximum. Refer to Application Notes www.recom-international.com REV: 2/2012 RPR-31 RPR50-S_D Series POWERLINE+ DC/DC-Converter Railway Input Voltage Requirements Nominal Input Voltage 24V 48V 72V 96V 110V EN50155 Input Range Min. Input (0.1s) 16.8~30V 14.4V 33.6~60V 28.8V 50.4~90V 43.2V 67.2~120V 57.6V 77~137.5V 66V NF F 01-510 Max Input Input Range Min. Input (1s) (0.1s) 33.6V 18~34V 12V 67.2V 100.8V 50~90V 36V 134.4V 154V 77~137V 55V RPR50 Max Input Input Range Min. Input (1s) (0.1s) 40V 12~36V 9V 25~75V 18V 115V 40~160V 36V 40~160V 36V 176V 40~160V 36V Max Input (1s) 40V 80V 176V 176V 176V Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range (continuous) complies with EN50155 and NFF 01-510 (Un=24V) 12-36VDC complies with EN50155 and NFF 01-510 (Un=48V) complies with EN50155 and NFF 01-510 (Un=72V, 96V &110V) Low Transient operating voltage (100ms) complies with EN50155 and NFF 01-510 Un x 0.5 High Transient operating voltage (1 second) complies with EN50155 and NFF 01-510 Un x 1.6 Allowed Input Ripple complies with EN50155 15% Input Reflected Ripple nominal Vin and full load 20mAp-p Supply Interruption (Perf. Criteria B) according to EN50155, 5.1.1.2 according to EN50155, 5.1.3 Class S2 Class C2 Start Up Time nominal Vin and constant resistive load (1) 2ms typ., 5ms max. Remote OFF input current Logic High Logic Low Nominal input Output Voltage Accuracy 50% Load and nominal Vin ±1.5% Voltage Adjustability Single Output only ±10% Remote ON/OFF RPR50 25-75VDC 40-160VDC Open or 3.0V < Vr < 5.5V Short or 0V < Vr < 1.2V 2mA typ. Minimum Load 0% Line Regulation low line, high line at full load ±0.3% Load Regulation 10% to 100% full load ±0.5% Cross Regulation (10% <> 100% Load) Dual Outputs only Ripple and Noise (20MHz bandwith limited) (measured with 1µF capacitor across outputs) 3% typ. / 5% max. Temperature Coefficient 1% Vout typ. / 3% max. ±0.04%/°C max. Transient Response 25% load step change Over Load Protection % of full load at nominal Vin 800µs 120% typ. Short Circuit Protection Current limit, automatic recovery Output Over Voltage Protection Single Output Dual Output Converter shutdown if Vout > Vout nominal + 20% Converter shutdown if Vout > Vout nominal + 10% Isolation Voltage According to EN50155 12.2.9.2 Tested at 1500VAC/1 minute Isolation Resistance According to EN50155 12.2.9.1 10MW min. Isolation Capacitance 1500pF max. Operating Frequency 260kHz ± 40kHz Operating Temperature Range (Tx) (Ambient Air, Free Convection) complies with EN50155: 4.1.2 and EN50125-1 with derating -45°C to +85°C -45°C to +100°C Maximum Case Temperature +120°C Over Temperature Protection internal thermistor Storage Temperature Range -55°C to +125°C Relative Humidity 5% to 95% RH Case Material (2) Aluminium continued on next page RPR-32 REV: 2/2012 www.recom-electronic.com RPR50-S_D Series POWERLINE+ DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Potting Material Weight Silicone (UL94-V0) 34g 39g 43g Flat Case Ribbed Case Baseplate Case Packing Quantity Flat, Ribbed Case Baseplate Case Safety Standards Thermal Performance CE Marked Cold Dry Heat, Operating Damp Heat,Cyclic complies to EN50155: 12.2.3/4/5 Vibration, Shock & Bump (complies with EN61373, Category 1 Class B) Vibration Shock 4 pcs per Tube Single packed certified to EN-60950-1, 1st Edition -40°C /16 Hours -40°C/+85°C/ 5 Cycles +25°C/+55°C, 95%RH / 2 x 24 Hours 5-150Hz, X:0.7m/s², Y:0.45m/s², Z:1m/s², 30 mins 5g/30ms/18 shocks Input Filter Built-in Pi Filter Conducted Emissions Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity EN50121-3-2 EN50121-3-2 EN50121-3-2 EN50121-3-2 EN50121-3-2 EN50121-3-2 EN50121-3-2 Class A Class A Perf. Criteria B Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria A MTBF calculated according to BELLCORE TR-NWT-000332 Case l: 50% Stress, Temperature at 50°C (Ground Benign) 2195 x 103 hours Recommended PCB Layout Ribbed and Flat Case Dual Output Single Output RPR50 Baseplate Case- suggested PCB layout Single Output Dual Output Input Fuse is recommended, but optional. Recommended fuse rating = double maximum input current, time delay type. To ensure optimum thermal performance, use large areas of copper on the PCB to assist with heat dissipation and mount the converter vertically. www.recom-international.com REV: 2/2012 RPR-33 RPR50-S_D Series POWERLINE+ DC/DC-Converter Typical Application Circuit EN50155 / NF F 01-510 Input Filter C8 D1 L1 Vin+ UR1 C1 DUT C2 Load VinC9 RPR50 Table Module Standard UR1 D1 C1 L1 C2 C8,C9 24V EN55011 Class A 100V/3A 685pF/50V 550µH±20% 680uF/250V 472pF/3kV 48V EN55011 Class A 100V/3A 225pF/100V 550µH±20% 680uF/250V 472pF/3kV 110V EN55011 Class A MOV 14D361K MOV 14D361K MOV 14D361K 100V/3A 474pF/250V 1200µH±20% 680uF/250V 472pF/3kV Notes : 1. The ON/OFF pin voltage is referenced to negative input. The pin is pulled high internally. ON/OFF control is standard with positive logic: e.g. RPR20-2405S, RPR20-4805D-B. Add “1” before the suffix for negative logic: e.g. RPR20-2405S-1, RPR20-11005D-1B. Positive logic: 0= OFF, 1 = ON. The converter will be ON if the CTRL is left open. Negative logic: 1 = OFF, 0 = ON. The converter will be OFF if the CTRL is left open.. 2. To ensure a good all-round electrical contact, the baseplate is pressed firmly into place within the aluminium housing.The hydraulic press can leave tooling marks and deformations to both the housing and baseplate. The case is anodised aluminium, so there will be natural variations in the case colour and the aluminium is not scratch resistant. Any resultant marks, scratches and colour varations are cosmetic only and do not affect the operation or performance of the converters. 3. The converter is supplied with a protective adhesive tape to keep the top surface clean. The tape is heat resistant and the converter can be soldered into place without removing the tape. The tape should be removed just before final installation. RPR-34 REV: 2/2012 www.recom-electronic.com RPR50-S_D Series POWERLINE+ DC/DC-Converter Package Style and Pinning (mm) Standard Case (No suffix) Pin Connections Pin # 1 2 3 4 5 6 Single +Vin -Vin +Vout -Vout Trim CTRL Dual +Vin -Vin +Vout Com -Vout CTRL Pin Pitch Tolerance ±0.35 mm RPR50 Flat Case (-F suffix) Pin Connections Pin # 1 2 3 4 5 6 Single +Vin -Vin +Vout -Vout Trim CTRL Dual +Vin -Vin +Vout Com -Vout CTRL Pin Pitch Tolerance ±0.35 mm www.recom-international.com REV: 2/2012 RPR-35 RPR50-S_D Series POWERLINE+ DC/DC-Converter Package Style and Pinning (mm) Baseplate Case (-B Suffix) 45.7 3.0 1.0 dia. 1.0 2.8 1.7 4.0 8.7 11.4 50.8 17.8 6x 3.55 (use M3 screws) 2.54 5.10 25.4 17.8 3.3 Pin Connections 1 Bottom View 2 10.20 3 4 6 5 30.9 10.20 32.6 10.20 36.0 Pin # 1 2 3 4 5 6 Single +Vin -Vin +Vout -Vout Trim CTRL Dual +Vin -Vin +Vout Com -Vout CTRL 40.6 RPR50 Pin Pitch Tolerance ±0.35 mm Baseplate Case Fixing - Mounting onto Heatsink/Bulkhead PCB Baseplate Case Fixing - Anti Vibration Mounting onto PCB Use 10mm Spacers PCB RPR-36 REV: 2/2012 www.recom-electronic.com