Features ● ● ● ● ● ● ● ● ● ICE Technology* Description 115°C Maximum Case Temperature -40°C MinimumTemp. Built-in FCC/EN55022 Class B Filter 4:1 Wide Input Voltage Range Six Sided Shielded Enclosure Ribbed or Baseplate Case Styles Min. Efficiency 87% 3kVDC Isolation Low Quiescent Current The RPP30-W series 4:1 input range DC/DC converters are ideal for high end industrial applications and COTS Military applications where a very wide operating temperature range of -40°C to +115°C is required. Although the case size is compact, the converter contains a built-in filter EN55022 Class B / FCC Level B without the need for any external components. The RPP30-W is available in two case styles: the ribbed case and the baseplate case for high vibration, bulkhead-mounting or for passive cooling applications. They are UL-60950-1 certified. POWERLINE+ DC/DC-Converter with 3 year Warranty 30 Watt 4:1 Single & Dual Output Selection Guide 24V and 48V 4:1 Input Types Input Range VDC Output Voltage VDC Output Current mA Input(1) Current mA Efficiency(2) (Min.) RPP30-243.3SW 9-36 3.3 8400 57/1326 87% RPP30-2405SW 9-36 5 6000 62/1397 89% RPP30-2412SW 9-36 12 2500 27/1420 87% RPP30-2415SW 9-36 15 2000 31/1436 87% RPP30-2424SW 9-36 24 1250 31/1436 87% RPP30-483.3SW 18-75 3.3 9000 46/704 87% RPP30-4805SW 18-75 5 6000 38/710 89% RPP30-4812SW 18-75 12 2500 15/727 87% RPP30-4815SW 18-75 15 2000 19/718 87% RPP30-4824SW 18-75 24 1250 19/718 87% RPP30-2412DW 9-36 ±12 ±1250 32/1453 87% RPP30-2415DW 9-36 ±15 ±1000 30/1436 87% RPP30-2424DW 9-36 ±24 ±625 30/1436 87% RPP30-4812DW 18-75 ±12 ±1250 18/727 87% RPP30-4815DW 18-75 ±15 ±1000 20/718 87% RPP30-4824DW 18-75 ±24 ±625 20/718 87% Part Number RoHS 2011/65/EU 6/6 UL-60950-1 Certified E224736 RPP30-W * ICE Technology ICE (Innovation in Converter Excellence) uses state-of-the-art techniques to minimise internal power dissipation and to increase the internal temperature limits to extend the ambient operating temperature range to the maximum. Refer to Application Notes ** add suffix for case options SUFFIX INFORMATION none = Standard Ribbed Case -B = Baseplate Case For other CTRL logic (-1), case style (-F) or low temperature options (-L, -M, -T) please contact RECOM for availability. www.recom-international.com REV: 0/2014 PP-19 RPP30-S_DW Series POWERLINE+ DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range Under Voltage Lockout 24V nominal input 48V nominal input 24V input DC-DC ON (min.) DC-DC OFF (max.) 48V input DC-DC ON (min.) DC-DC OFF (max.) Input Filter Common Mode EMC Filter Input Surge Voltage (100 ms max.) 24V Input 48V Input Input Reflected Ripple nominal Vin and full load Start Up Time Remote ON/OFF (3) nominal Vin and constant resistor load Logic High Logic Low Nominal input Remote OFF input current 50VDC 100VDC Output Power 300mAp-p 20ms typ., 50ms max. Open or 3.0V < Vr < 5.5V Short or 0V < Vr < 1.2V 2mA typ. 30W max. Output Voltage Accuracy Nominal Vin ±1.5% Voltage Adjustability Single Output only Minimum Load RPP30-W 9-36VDC 18-75VDC 8.5VDC 8VDC 17.5VDC 17VDC ±5% 0% Line Regulation low line, high line at full load ±0.3% Load Regulation 10% to 100% full load ±0.5% Cross Regulation (10% <> 100% Load) Ripple and Noise (20MHz bandwith limited) (measured with 1µF MLCC capacitor across outputs) Dual Outputs only 3.3V, 5V All others Temperature Coefficient ±0.04%/°C max. Transient Response 25% load step change Over Load Protection % of full load at nominal Vin Short Circuit Protection 800µs 120% typ. Power Limit, automatic recovery Output Over Voltage Protection (refer to block diagram in Application Notes) Converter shutdown if Vout > Vout nominal +20% Isolation Voltage Rated at 2250VDC/1 minute, Flash tested at 3000VDC/1 second Isolation Resistance 10MΩ min. Isolation Capacitance (refer to block diagram in Application Notes) 3000pF max. Operating Frequency Operating Temperature Range 3% typ./ 5% max. 80mVp-p typ. 27mV-60mVp-p max 300kHz ± 30kHz Ambient, Free Convection -40°C to see Calculation (Note 7) Maximum Case Temperature +115°C Storage Temperature Range -55°C to +125°C Over Temperature Protection (refer to block diagram in Application Notes) Thermal Impedance (Natural convection) Ribbed Case: Vertical Ribbed Case: Horizontal internal thermistor 7.3°C/Watt 10°C/Watt Relative Humidity 5% to 95% RH (6) Aluminium Case Material Potting Material Weight Silicone (UL94-V0) Ribbed Case Baseplate Case 39g 43g continued on next page PP-20 REV: 0/2014 www.recom-power.com RPP30-S_DW Series POWERLINE+ DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Packing Quantity Ribbed Case Baseplate Case Safety Standards 4 pcs per Tube Single packed certified UL-60950-1, 1st Edition Thermal Cycling complies with MIL-STD-810F Vibration 10-55Hz, 12G, 30 Min. along X, Y and Z Conducted Emissions Radiated Emissions ESD Radiated Immunity Fast Transient (4) Surge (4) Conducted Immunity EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 MTBF calculated according to BELLCORE TR-NWT-000332 (5) Class B Class B Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria B Perf. Criteria A 2195 x 103 hours Notes : Pdissipation = Pin-Pout = Pout Ƞ RPP30-W 1. Typical values at nominal input voltage and no load/full load. 2. Min values at nominal input voltage and full load. 3. The ON/OFF pin voltage is referenced to negative input. The pin is pulled high internally. ON/OFF control is standard with positive logic: e.g. RPP30-2405SW, RPP30-4805DW-B. Positive logic: 0= OFF, 1 = ON. The converter will be ON if the CTRL is left open. 4. Requires an external 100µF low ESR capacitor to meet EN61000-4-4 and EN61000-4-5 5. Case l: 50% Stress, Temperature at 50°C (Ground Benign). 6. To ensure a good all-round electrical contact, the baseplate is pressed firmly into place within the aluminium housing.The hydraulic press can leave tooling marks and deformations to both the housing and baseplate. The case is anodised aluminium, so there will be natural variations in the case colour and the aluminium is not scratch resistant. Any resultant marks, scratches and colour varations are cosmetic only and do not affect the operation or performance of the converters. 7. Example: Tcase = Case Temperature Rthcase-ambient = 7.3°C/W (vertical) Tambient = Environment Temperature Rthcase-ambient = 11°C/W (horizontal) Pdissipation = Internal losses Tcase - Tambient Pin = Input Power Rthcase-ambient = Pdissipation Pout = Output Power Pout Ƞ = Efficiency under given Operating Conditions Pdissipation = Pin-Pout = Ƞ - Pout Rthcase-ambient = Thermal Impedance - Pout Practical Example: Take the RPP30-2405SW with 90% load. What is the maximum ambient operating temperature? Use converter vertical in application. Effmin = 89% @ Vnom Pout = 30W Poutapp = 30 x 0.9 = 27W Pdissipation = Ƞ Pout Ƞ - Pout = ~89% (from Eff vs Load Graph) Rth = 115°C - Tambient Tcasemax - Tambient --> 7.3°C/W = 3.34W Pdissipation Tambient = 90.64°C 27 - 27 = 3.34W Pdissipation = 0.89 www.recom-international.com REV: 0/2014 PP-21 RPP30-S_DW Series POWERLINE+ DC/DC-Converter Typical Characteristics -Vout External Output Trimming -Vout Trim Up 10kW Trimpot Trim 10kW Trimpot Trim Trim Down 10kW Trimpot +Vout +Vout RPP30-4805SW Efficiency VS Load Vnom RPP30-W Efficiency (%) 100 90 80 70 60 50 40 30 20 10 0 0 20 40 60 80 100 Output Load (%) Recommended PCB Layout Ribbed Case Dual Output Single Output C2 C1 Fuse PP-22 C1 C2 Top View C3 Fuse REV: 0/2014 Top View www.recom-power.com RPP30-S_DW Series POWERLINE+ DC/DC-Converter Recommended PCB Layout Baseplate Case- suggested PCB layout Dual Output Single Output C2 No tracks in this area (42 x 30mm) C1 C3 C3 Fuse Top View Input Fuse is recommended. Recommended fuse rating = double maximum input current, time delay type. Input Capacitor, C1, is required to meet EN61000 Surge and Fast Transient, otherwise it is not required for normal operation. Output Capacitors C2/C3 are recommended, but not required for normal operation. Typical capacitor values are 1µF MLCC To ensure optimum thermal performance, use large areas of copper on the PCB to assist with heat dissipation and mount the converter vertically. Package Style and Pinning (mm) Ribbed Case (Standard - no Suffix) RPP30-W 30.5 50.80 11.70 dia. 1.0 5.1 +/- 0.9 Standoff = 1.3 45.70 3.3 5.10 1 Bottom View 2 10.20 3 10.20 4 10.20 6 7.6 www.recom-international.com Pin Connections 5 5.0 REV: 0/2014 Pin # 1 2 3 4 5 6 Single +Vin -Vin +Vout -Vout Trim CTRL Dual +Vin -Vin +Vout Com -Vout CTRL Pin Pitch Tolerance ±0.35 mm PP-23 RPP30-S_DW Series POWERLINE+ DC/DC-Converter Package Style and Pinning (mm) Baseplate Case (-B Suffix) 45.7 3.0 1.0 dia. 1.0 2.8 1.7 4.0 8.7 11.4 50.8 17.8 6x 3.55 (use M3 screws) 3.3 Pin Connections 2.54 5.10 25.4 17.8 1 Bottom View 2 10.20 3 30.9 10.20 32.6 4 6 Pin # 1 2 3 4 5 6 5 10.20 36.0 38.0* Single +Vin -Vin +Vout -Vout Trim CTRL Dual +Vin -Vin +Vout Com -Vout CTRL 40.6 RPP30-W Pin Pitch Tolerance ±0.35 mm *Recommended Fixing Centres Baseplate Case Fixing - Mounting onto Heatsink/Bulkhead PCB Baseplate Case Fixing - Anti Vibration Mounting onto PCB Use 10mm Spacers PCB The product information and specifications are subject to change without prior notice. All products are designed for non-safety critical commercial and industrial applications. The Buyer agrees to implement safeguards that anticipate the consequences of any failures that might cause harm, loss of life and/or damage property. PP-24 REV: 0/2014 www.recom-power.com