Ordering number : ENA1359A LV5230LG Bi-CMOS IC 7ch×17ch LED Driver Overview The LV5230LG is a dot-matrix LED driver IC for cell phones. Features • 7×17 dot-matrix LED driver (5×15 dot-matrix supported) • Each dot can be set for display over the serial bus. Functions • LED driver Column (anode) driving P-channel driver × 17 channels Row (cathode ) driving N-channel driver × 7 channels LED current per dot : 25mA maximum Two flames of 7×17 (5×15) patterns can be set. 7 grayscale level adjustment on a dot basis (PWM duty factor switching) Reverse display Horizontal scroll (1 frame/2 frames) Continuous/single scroll selectable Vertical scroll (1 frame/2 frames) Continuous/single scroll selectable Automatic flashing can be specified per each dot Interupt output at the end of scroll Ring tone synchronization function • LED driving open drain output × 2 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. O0610 SY/10709 MS PC 20081114-S00001 No.A1359-1/27 LV5230LG Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Symbol Conditions Ratings Unit VCC max1 SVCC, VDD 5.5 VCC max2 LEDVDD V 6 V Allowable power dissipation Pd max Mounted on a board * 1.2 W Operating temperature Topr -30 to +85 °C Storage temperature Tstg -40 to +125 °C ∗ Designated board : 40mm×50mm×0.8mm, glass epoxy 4-layter board (2S2P) Operating Conditions at Ta = 25°C Parameter Supply voltage 1 Symbol Conditions VBAT SVCC Supply voltage 2 VDD Supply voltage 3 VLEDVDD Ratings Unit 3 to 4.5 V VDD 1.65 to 3 V LEDVDD 2.7 to 5.5 V * Power application sequence : 1. VBAT 2. VDD VBAT > VDD, No restriction on VLEDVDD. * Same level of voltage LEDVCC must be applied to the 4 pins as VLEDVDD voltage. Electrical Characteristics, Analog Block Ta = 25°C, VBAT = 3.7V, VDD = 2.6V, LEDVDD = 3.7V, unless otherwise specified Parameter Symbol Ratings Conditions min typ Unit max Consumption current (SVCC+VDD+LEDVDD) RESET : L 0 5 μA Consumption current 1 ICC1 Consumption current 2 ICC2 RESET : H, serial default 0.3 5 μA Consumption current 3A ICC3A When STBY mode is released, RT external 1.9 3 mA Consumption current 3B ICC3B When STBY mode is released, RT external 1 2 mA Ω resistance value is 27kΩ resistance value is 160kΩ LEDSW On resistance 1 Ron1 ROW1 to 7 : IL = 425mA 1 2 On resistance 2 Ron2 LEDO1, LED02 : IL = 20mA 2 4 Ω LED current 1 ILED1 COL1 to COL17 : VO = LEDVDD-0.5V 20 22.5 25 mA LED current 2 ILED2 2.8 3.8 4.8 mA RT external resistance value : 27kΩ COL1 to COL17 : VO = LEDVDD-0.5V RT external resistance value : 160kΩ Leakage current 1 IL1 ROW1 to ROW : VO = 5V 1 μA Leakage current 2 IL2 COL1 to COL17 : VO = 0V, LEDVDD = 5V 1 μA Leakage current 3 IL3 LEDO1, LED02 : VO = 5V 1 μA OSC Oscillator frequency F1 When RT external resistance is 27kΩ, 900 1000 1100 kHz 900 1000 1100 kHz 20 22.5 25 mA CT external capacitance is 120pF Oscillator frequency F1 When RT external resistance is 160kΩ, CT external capacitance is 10pF RT Maximum. LED drive current setting LI1 RT external resistance : 27kΩ LED maximum drive current = 607.5/RT resistance Continued on next page. No.A1359-2/27 LV5230LG Continued from preceding page. Parameter Symbol Ratings Conditions min Unit typ max Control Circuit Block H level 1 VINH1 VDD×0.8 Input H level, SDA, SCL L level 1 VINL1 Input L level, SDA, SCL H level 2 VINH2 Input H level, RESET, SCTL 1.5 L level 2 VINL2 Input L level, RESET, SCTL 0 H input current 3 IHIN3 Inflow-outflow current, when VBAT voltage is L input current 3 ILIN3 V VDD×0.2 0 V V 0.3 V -1 0 1 μA -1 0 1 μA 15 47 75 μA -1 0 1 μA applied to RESET pin. Inflow-outflow current, when 0V is applied to RESET pin. H input current 4 IHIN4 Inflow-outflow current, when VBAT voltage is applied to SCTL pin. L input current 4 ILIN4 Inflow-outflow current, when 0V is applied to SCTL pin. H output level 1 VH1 INTO pin, H level, IO = 1mA VDD-0.3 VDD V L output level 1 VL1 INTO pin, L level, IO = 1mA 0 0.3 V Package Dimensions unit : mm (typ) 3359 Pd max – Ta 0.45 0.55 5.0 0.55 1 2 3 4 0.65 5.0 5 6 7 0.45 Allowable power dissipation, Pd max – W 1.4 G F E D C B A 0.65 0.8 0.0 NOM 0.35 Specified board : 50 × 40 × 0.8mm3 4-layer glass epoxy (2S2P) board 1.2 1.0 0.8 0.6 0.48 0.4 0.2 0 – 30 – 20 0 20 40 60 80 100 Ambient temperature, Ta – °C SANYO : FLGA49J(5.0X5.0) Pin Assignment 1 G F E NC COL16 CT D LEDVDD COL17 SVCC SDA 3 COL15 COL14 COL13 SCL 4 LEDVDD COL12 COL11 RESET 5 COL10 COL9 COL4 COL2 6 LEDVDD COL8 COL5 COL3 NC COL7 G F B SGND LEDGND ROW2 1 2 7 C ROW1 ROW3 D TEST 1 RT 2 VDD LEDGND ROW4 2 3 INTO ROW5 LEDGND 3 4 ROW6 LEDGND 4 5 LEDO2 LEDO1 ROW7 6 GPI COL6 LEDVDD COL1 LEDGND 5 E Top view A C B NC 7 A No.A1359-3/27 COL17 COL16 COL15 COL14 COL13 COL12 COL11 COL10 COL9 COL8 COL7 COL6 COL5 COL4 COL3 COL2 COL1 LEDGND4 OSC LEDGND3 LEDGND2 LEDGND1 ROW1 ROW2 ROW3 ROW4 ROW5 ROW6 ROW7 VDD SCL SDA INTO GPI (SCTL) LEDO2 LEDO1 TEST LEDGND5 RESET RT CT SVCC SGND NC NC NC LV5230LG Block Diagram VBAT IREF I/F level shift I2C bus control PWM COUNTER shift register LEDVDD No.A1359-4/27 LV5230LG COL13 COL14 COL15 COL13 COL14 COL15 COL17 COL12 COL12 COL16 COL11 COL11 COL10 COL9 COL8 COL7 COL6 COL5 COL4 COL3 COL2 COL1 Dot Matrix LED 7 × 17 ROW1 ROW2 ROW3 ROW4 ROW5 ROW6 ROW7 2ms ROW1 ROW2 ROW3 ROW4 ROW5 ROW6 ROW7 Dynamic Display COL10 COL9 COL8 COL7 COL6 COL5 COL4 COL3 COL2 COL1 Dot Matrix LED 5 × 15 ROW1 ROW2 ROW3 ROW4 ROW5 2ms ROW1 ROW2 ROW3 ROW4 ROW5 Dynamic Display No.A1359-5/27 LV5230LG Pin Functions Pin No. A1 Pin name TEST Pin Description Equivalent Circuit Test signal input pin. Be sure to connect the pin to GND. SVCC A1 pin A2 RT Reference current setting resistor connection pin. SVCC By connecting the external resistor between this pin and GND, the reference current is generated. The pin voltage is about 0.61V. Change of this current value enables change of the oscillation frequency and A2 pin LED driver current value (COL1 to COL17 only). A3 ROW4 N-channel driver output pins 1 to 7 for row (cathode) drive. A6 ROW7 Must be connected to GND when not to be used. B1 ROW2 B2 ROW3 B4 ROW5 B5 ROW6 C2 ROW1 A4 LEDGND3 ROW SW GND. A5 LEDGND4 ROW SW GND. A7 NC No connection. B3 LEDGND2 ROW SW GND. B6 LEDO1 Open drain output pins for LED drive. C6 LEDO2 Must be connected to GND when not to be used. A3, A6, B1, B2, B4, B5, C2 pin G1 G7 B7 LEDGND5 GND pin dedicated for LEDO1 and LEDO2. C1 LEDGND1 ROW SW GND. C3 VDD Power supply for serial I/F. C4 INTO Interrupt signal output pin. B6, C6 pin VDD SVCC C4 pin Continued on next page. No.A1359-6/27 LV5230LG Continued from preceding page. Pin No. C5 Pin name GPI Pin Description Ringing tone synchronization signal input pin. Must be connected to GND when not to be used. Equivalent Circuit SVBAT C5 pin C7 COL1 P-channel driver output pins 1 to 17 for column (anode) drive. D5 COL2 Must be connected to GND when not to be used. D6 COL3 E3 COL13 E4 COL11 E5 COL4 E6 COL5 E7 COL6 F1 COL16 F2 COL17 F3 COL14 F4 COL12 F5 COL9 F6 COL8 F7 COL7 G3 COL15 G5 COL10 D7 LEDVDD Dot matrix LED drive voltage supply pins. D1 SGND Analog circuit GND pin. D2 SDA Serial data signal input pin. LEDVDD C7, D5, D6, E3, E4, E5, E6, E7, F1, F2, F3, F4, F5, F6, F7, G3, G5 pin G2 G4 G6 VDD D2 pin D3 SCL Serial clock signal input pin. VDD D3 pin Continued on next page. No.A1359-7/27 LV5230LG Continued from preceding page. Pin No. D4 Pin name RESET Pin Description Equivalent Circuit Reset signal input pin. Reset state when low. SVCC D4 pin E1 CT Oscillator frequency setting capacitor connection pin. The oscillation frequency can be adjusted by changing the value of SVCC capacitor at CT pin. E1 pin E2 SVCC Analog circuit power supply. No.A1359-8/27 LV5230LG Serial Bus Communication Specifications I2C serial transfer timing conditions twH SCL th1 twL th2 tbuf SDA th1 ts2 ts1 ts3 Resend start condition Start condition ton Stop condition tof Input waveform condition Standard mode Parameter symbol Conditions min typ SCL clock frequency Data set up time ts1 SCL setup time relative to the fall of SDA 4.7 ts2 SDA setup time relative to the rise of SCL 250 ns ts3 SCL setup time relative to the rise of SDA 4.0 μs th1 SCL data hold time relative to the fall of SDA 4.0 μs th2 SDA hold time relative to the fall of SCL twL Pulse width Input waveform conditions Bus free time 100 unit fscl Data hold time 0 max SCL clock frequency kHz μs 0 μs SCL pulse width for the L period 4.7 μs twH SCL pulse width for the H period 4.0 ton SCL and SDA (input) rise time 1000 tof SCL and SDA (input) fall time 300 tbuf Time between STOP and START conditions μs ns ns μs 4.7 High-speed mode Parameter Symbol Conditions min typ SCL clock frequency Data setup time ts1 SCL setup time relative to the fall of SDA 0.6 ts2 SDA setup time relative to the rise of SCL 100 ns ts3 SCL setup time relative to the rise of SDA 0.6 μs th1 SCL data hold time relative to the fall of SDA 0.6 μs th2 SDA hold time relative to the fall of SCL twL Pulse width Input waveform conditions Bus free time 400 unit fscl Data hold time 0 max SCL clock frequency kHz μs 0 μs SCL pulse width for the L period 1.3 μs twH SCL pulse width for the H period 0.6 ton SCL and SDA (input) rise time 300 tof SCL and SDA (input) fall time 300 tbuf Time between STOP and START conditions 1.3 μs ns ns μs No.A1359-9/27 LV5230LG I2C bus transmission method Start and stop conditions In the I2C bus, SDA must basically be kept in the constant state while SCL is “H” as shown below during data transfer. SCL SDA ts2 th2 When data transfer is not made, both SCL and SDA are in the “H” state. When SCL = SDA = “H”, change of SDA from “H” to “L” enables the start conditions to start access. When SCL is “H”, change of SDA from “L” to “H” enables the stop conditions to stop access. Start condition Stop condition th1 ts3 SCL SDA No.A1359-10/27 LV5230LG Data transfer and acknowledgement response After establishment of start conditions, data transfer is made by one byte (8 bits). Data transfer enables continuous transfer of any number of bytes. Each time the 8-bit data is transferred, the ACK signal is sent from the receive side to the send side. The ACK signal is issued when SDA on the send side is released and SDA on the receive side is set “L” immediately after fall of the clock pulse at the SCL eighth bit of data transfer to “L”. When the next 1-byte transfer is left in the receive state after transmission of the ACK signal from the receive side, the receive side releases SDA at fall of the SCL ninth clock. In the I2C bus, there is no CE signal. Instead, 7-bit slave address is assigned to each device and the first byte of transfer is assigned to the command (R/W) representing the 7-bit slave address and subsequent transfer direction. The 7-bit address is transferred sequentially from MSB and if the eighth bit is “L”, the second byte is WRITE mode and if “H”, the second byte is READ mode. In the READ mode, the ACK signal issued immediately before sending the stop condition must be 1. In LV5230, the slave address is specified as (1110111). Write mode Start M S B Slave address L S B W A C K M S B Register address L S B A C K M S B Data L S B A C K Stop A C K Stop SCL SDA 1 1 1 0 1 1 1 0 0 0 Slave address L S B W 1 1 0 0 0 1 0 0 0 0 1 0 0 0 1 Read mode Start M S B A C K M S B Data L S B A C K M S B Data L S B SCL SDA 1 1 1 0 1 1 STATUS 0 STATUS 1 No.A1359-11/27 LV5230LG Serial modes setting address : 00h CTRL1 00h CTRL1 D7 D6 D5 D4 D3 D2 D1 D0 Register name STBY - MXMODE MSWEN - DFCLR FADECLR SCRLCLR R/W W W W W W W Default 0 0 0 0 0 0 D0 : SCRLCLR Scroll interrupt signal clear 0 : Scroll interrupt signal stays active. 1 : Scroll interrupt signal cleared. * Automatically updated to 0 after being set to 1. D1 : FADECLR Fade interrupt signal clear 0 : Fade interrupt signal stays active. 1 : Fade interrupt signal cleared. * Automatically updated to 0 after being set to 1. D2 : DFCLR Pallete fade interrupt signal clear 0 : Pallete fade interrupt signal stays active. 1 : Pallete fade interrupt signal cleared. * Automatically updated to 0 after being set to 1. D4 : MSWEN Ringing tone synchronization enable 0 : Ringing tone synchronization enabled. * GPI = L : All LEDs turned off, GPI = H : Normal operation 1 : Ringing tone synchronization disabled. D5 : MXMODE LED matrix mode switchingr 0 : 7 × 17 LED matrix 1 : 5 × 15 LED matrix D7: STBY Standby mode 0 : Standby 1 : Operation No.A1359-12/27 LV5230LG address : 01h CTRL2 01h CTRL2 D7 D6 D5 D4 D3 D2 D1 D0 Register name LEDOFF - LED2 LED1 - ROTHEN ROTVEN PAGE R/W W W W W W W Default 0 0 0 0 0 0 D0 : PAGE Display page 0 : Frame 1 displayed 1 : Frame 2 displayed D1 : ROTVEN Vertical rotation 0 : Normal display 1 : Vertically rotated display D2 : ROTHEN Horizontal rotation 0 : Normal display 1 : Horizontally rotated display D4 : LED1 LED1 enable 0 : LED1 turned off 1 : LED1 turned on D5 : LED2 LED2 enable 0 : LED2 turned off 1 : LED2 turned on D7 : LEDOFF Screen display ON/OFF 0 : Normal operation 1 : All matrix LEDs turned off No.A1359-13/27 LV5230LG address : 02h DOTMODE 02h DOTMODE D7 D6 D5 D4 D3 D2 D1 D0 Register name DOTEN DOTMODE - - DOTSP [3] DOTSP [2] DOTSP [1] DOTSP [0] R/W W W W W W W Default 0 0 0 0 0 0 D3-D0 : DOTSP Flashing/brightness inversion speed D3 D2 D1 D0 0 0 0 0 ON : 0.05s OFF : 0.05s 0 0 0 1 ON : 0.10s OFF : 0.10s 0 0 1 0 ON : 0.15s OFF : 0.15s 0 0 1 1 ON : 0.20s OFF : 0.20s 0 1 0 0 ON : 0.25s OFF : 0.25s 0 1 0 1 ON : 0.30s OFF : 0.30s 0 1 1 0 ON : 0.35s OFF : 0.35s 0 1 1 1 ON : 0.40s OFF : 0.40s 1 0 0 0 ON : 0.45s OFF : 0.45s 1 0 0 1 ON : 0.50s OFF : 0.50s 1 0 1 0 ON : 0.55s OFF : 0.55s 1 0 1 1 ON : 0.60s OFF : 0.60s 1 1 0 0 ON : 0.65s OFF : 0.65s 1 1 0 1 ON : 0.70s OFF : 0.70s 1 1 1 0 ON : 0.75s OFF : 0.75s 1 1 1 1 ON : 0.80s OFF : 0.80s D6 : DOTMODE Flashing/brightness inversion display switching 0 : Flashing 1 : Brightness inversion D7 : DOTEN Flashing/brightness inversion display enable 0 : Disable 1 : Enable No.A1359-14/27 LV5230LG address : 03h AUTOPAGE 03h AUTOPAGE D7 D6 D5 D4 D3 D2 D1 D0 Register name PGEN - - - PGSP [3] PGSP [2] PGSP [1] PGSP [0] R/W W W W W W Default 0 0 0 0 0 D3 top D0 : PGSP Page switching speed D3 D2 D1 D0 0 0 0 0 Page1 : 0.05s Page2 : 0.05s 0 0 0 1 Page1 : 0.10s Page2 : 0.10s 0 0 1 0 Page1 : 0.15s Page2 : 0.15s 0 0 1 1 Page1 : 0.20s Page2 : 0.20s 0 1 0 0 Page1 : 0.25s Page2 : 0.25s 0 1 0 1 Page1 : 0.30s Page2 : 0.30s 0 1 1 0 Page1 : 0.35s Page2 : 0.35s 0 1 1 1 Page1 : 0.40s Page2 : 0.40s 1 0 0 0 Page1 : 0.45s Page2 : 0.45s 1 0 0 1 Page1 : 0.50s Page2 : 0.50s 1 0 1 0 Page1 : 0.55s Page2 : 0.55s 1 0 1 1 Page1 : 0.60s Page2 : 0.60s 1 1 0 0 Page1 : 0.65s Page2 : 0.65s 1 1 0 1 Page1 : 0.70s Page2 : 0.70s 1 1 1 0 Page1 : 0.75s Page2 : 0.75s 1 1 1 1 Page1 : 0.80s Page2 : 0.80s D7 : PGEN Automatic page switching enable 0 : Disable 1 : Enable No.A1359-15/27 LV5230LG address : 04h SCCON1 04h SCCON1 D7 D6 D5 D4 D3 D2 D1 D0 Register name SCEN SCDIR [1] SCDIR [0] SCMODE SCSP [3] SCSP [2] SCSP [1] SCSP [0] R/W W W W W W W W W Default 0 0 0 0 0 0 0 0 D3 to D0 : SCSP Scroll speed per dot D3 D2 D1 D0 0 0 0 0 50ms 0 0 0 1 100ms 0 0 1 0 150ms 0 0 1 1 200ms 0 1 0 0 250ms 0 1 0 1 300ms 0 1 1 0 350ms 0 1 1 1 400ms 1 0 0 0 450ms 1 0 0 1 500ms 1 0 1 0 550ms 1 0 1 1 600ms 1 1 0 0 650ms 1 1 0 1 700ms 1 1 1 0 750ms 1 1 1 1 800ms D4 : SCMODE Page mode when scrolling 0 : Scrolls and displays the current page repeatedly. 1 : Scrolls and displays the current and other pages alternately. D6 to D5 : SCDIR Scroll direction D6 D5 0 0 Right 0 1 Left 1 0 Up 1 1 Down D7 : SCEN Scroll enable 0 : Disable 1 : Enable No.A1359-16/27 LV5230LG address : 05h SCCON2 05h SCCON2 D7 D6 D5 D4 D3 D2 D1 D0 Register name SCGO - SCCNT [5] SCCNT [4] SCCNT [3] SCCNT [2] SCCNT [1] SCCNT [0] R/W W W W W W W W Default 0 0 0 0 0 0 0 D0 to D5 : SCCNT Scroll increment 17 × 7 mode When SCCON1.SCDIR = 0 or 1 : 1 to 34 When SCCON1.SCDIR = 2 or 3 : 1 to 14 15 × 5 mode When SCCON1.SCDIR = 0 or 1 : 1 to 30 When SCCON1.SCDIR = 2 or 3 : 1 to 10 * Scrolls one page when SCCNT = 0. D7 : SCGO Scroll start 0 : Standby 1 : Scroll start * The scrolled state is maintained until SCCON1 and SCEN are set low. No.A1359-17/27 LV5230LG address : 06h FADECON 06h FADECON D7 D6 D5 D4 D3 D2 D1 D0 Register name FADEEN FADEGO FADEIO FADEMOD FDSP [3] FDSP [2] FDSP [1] FDSP [0] R/W W W W W W W W W Default 0 0 0 0 0 0 0 0 D3 to D0 : FDSP Fade speed per 1 grayscale level (It takes (following set value × 64) seconds to complete fading) D3 D2 D1 D0 0 0 0 0 2ms 0 0 0 1 4ms 0 0 1 0 6ms 0 0 1 1 8ms 0 1 0 0 10ms 0 1 0 1 12ms 0 1 1 0 14ms 0 1 1 1 16ms 1 0 0 0 18ms 1 0 0 1 20ms 1 0 1 0 22ms 1 0 1 1 24ms 1 1 0 0 26ms 1 1 0 1 28ms 1 1 1 0 30ms 1 1 1 1 32ms D4 : FADEMOD Single/continuous switching 0 : Single fade-in/fade-out operation 1 : Fade-in/fade-out operation repeated D5 : FADEIO Fade-in/fade-out switching 0 : Fade in 1 : Fade out D6 : FADEGO Fade-in/fade-out start 0 : Standby 1 : Fade-in/fade-out operation start D7 : FADEEN Fade-in/fade-out enable 0 : Disable 1 : Enable * The interrupt flag is set high after a fade operation has completed. Manual clearing is required. * All LEDs are turned off if FADEEN is set to 1 when FADEO is set to 0. If GO is set to 1 in that state, fade-in operation starts and LEDs are turned on. No.A1359-18/27 LV5230LG address : 07h ROWSW 07h ROWSW D7 D6 D5 D4 D3 D2 D1 D0 Register name ROWSWEN ROWSW7 ROWSW6 ROWSW5 ROWSW4 ROWSW3 ROWSW2 ROWSW1 R/W W W W W W W W W Default 0 0 0 0 0 0 0 0 D0 : ROWSW1 Row 1 display ON/OFF 0 : ON 1 : OFF D1 : ROWSW2 Row 2 display ON/OFF 0 : ON 1 : OFF D2 : ROWSW3 Row 3 display ON/OFF 0 : ON 1 : OFF D3 : ROWSW4 Row 4 display ON/OFF 0 : ON 1 : OFF D4 : ROWSW5 Row 5 display ON/OFF 0 : ON 1 : OFF D5 : ROWSW6 Row 6 display ON/OFF 0 : ON 1 : OFF D6 : ROWSW7 Row 7 display ON/OFF 0 : ON 1 : OFF D7 : ROWSWEN Each row ON/OFF enable 0 : Disable 1 : Enable No.A1359-19/27 LV5230LG address : 08h COLSW1 08h COLSW1 D7 D6 D5 D4 D3 D2 D1 D0 Register name COLSWEN - - - - - - COLSW17 R/W W W Default 0 0 D0 : COLSW17 Row 17 display ON/OFF 0 : ON 1 : OFF D7 : COLSWEN Column ON/OFF enable 0 : Disable 1 : Enable address : 09h COLSW2 09h COLSW2 D7 D6 D5 D4 D3 D2 D1 D0 Register name COLSW16 COLSW15 COLSW14 COLSW13 COLSW12 COLSW11 COLSW10 COLSW9 R/W W W W W W W W W Default 0 0 0 0 0 0 0 0 D0 : COLSW9 Column 9 display ON/OFF 0 : ON 1 : OFF D1 : COLSW10 Column 10 display ON/OFF 0 : ON 1 : OFF D2 : COLSW11 Column 11 display ON/OFF 0 : ON 1 : OFF D3 : COLSW12 Column 12 display ON/OFF 0 : ON 1 : OFF D4 : COLSW13 Column 13 display ON/OFF 0 : ON 1 : OFF D5 : COLSW14 Column 14 display ON/OFF 0 : ON 1 : OFF D6 : COLSW15 Column 15 display ON/OFF 0 : ON 1 : OFF D7 : COLSW16 Column 16 display ON/OFF 0 : ON 1 : OFF No.A1359-20/27 LV5230LG address : 0Ah COLSW3 0Ah COLSW3 D7 D6 D5 D4 D3 D2 D1 D0 Register name COLSW8 COLSW7 COLSW6 COLSW5 COLSW4 COLSW3 COLSW2 COLSW1 R/W W W W W W W W W Default 0 0 0 0 0 0 0 0 D0 : COLSW1 Column 1 display ON/OFF 0 : ON 1 : OFF D1 : COLSW2 Column 2 display ON/OFF 0 : ON 1 : OFF D2 : COLSW3 Column 3 display ON/OFF 0 : ON 1 : OFF D3 : COLSW4 Column 4 display ON/OFF 0 : ON 1 : OFF D4 : COLSW5 Column 5 display ON/OFF 0 : ON 1 : OFF D5 : COLSW6 Column 6 display ON/OFF 0 : ON 1 : OFF D6 : COLSW7 Column 7 display ON/OFF 0 : ON 1 : OFF D7 : COLSW8 Column 8 display ON/OFF 0 : ON 1 : OFF No.A1359-21/27 LV5230LG address : 0Bh DFCON1 0Bh DFCON1 D7 D6 D5 D4 D3 D2 D1 D0 Register name DFEN DFGO - - DFDIR DFNUM [2] DFNUM [1] DFNUM [0] R/W W W W W W W Default 0 0 0 0 0 0 D2 to D0 : DFNUM Number of palette to be faded to 0 : Invalid 1 to 7 : Correspond to PWMDUTY1 to PWMDUTY7. D3 : DFDIR Fading direction 0 : Fade in 1 : Fade out D6 : DFGO Fade start 0 : Standby 1 : Start D7 : DFEN Fade enable 0 : Disable 1 : Enable * The interrupt flag is set high after a fade operation has completed. Manual clearing is required. address : 0Ch DFCON2 0Ch DFCON2 D7 D6 D5 D4 D3 D2 D1 D0 Register name - - - - DFSP [3] DFSP [2] DFSP [1] DFSP [0] R/W W W W W Default 0 0 0 0 D3 to D0 : DFSP Fading speed per grayscale D3 D2 D1 D0 0 0 0 0 2ms 0 0 0 1 4ms 0 0 1 0 6ms 0 0 1 1 8ms 0 1 0 0 10ms 0 1 0 1 12ms 0 1 1 0 14ms 0 1 1 1 16ms 1 0 0 0 18ms 1 0 0 1 20ms 1 0 1 0 22ms 1 0 1 1 24ms 1 1 0 0 26ms 1 1 0 1 28ms 1 1 1 0 30ms 1 1 1 1 32ms No.A1359-22/27 LV5230LG address : 0Dh MAXDUTY 0Dh MAXDUTY D7 D6 D5 D4 D3 D2 D1 D0 Register name - - MXDTY [5] MXDTY [4] MXDTY [3] MXDTY [2] MXDTY [1] MXDTY [0] R/W W W W W W W Default 0 0 0 0 0 0 D5 to D0 : MXDTY Maximum DUTY value n : 0 to 63 Maximum DUTY value (n/64) × 100[%] * 100[%] when n = 63. address : 10h PWMDUTY1 10h PWMDUTY1 D7 D6 D5 D4 D3 D2 D1 D0 Register name - - DUTY1 [5] DUTY1 [4] DUTY1 [3] DUTY1 [2] DUTY1 [1] DUTY1 [0] R/W W W W W W W Default 0 0 0 0 0 0 D5 to D0 : DUTY1 DUTY value for brightness 1 setting n : 0 to 63 DUTY value ((n + 1)/64) × 100 [%] * 0 [%] when n = 0. address : 11h PWMDUTY2 11h PWMDUTY2 D7 D6 D5 D4 D3 D2 D1 D0 Register name - - DUTY2 [5] DUTY2 [4] DUTY2 [3] DUTY2 [2] DUTY2 [1] DUTY2 [0] R/W W W W W W W Default 0 0 0 0 0 0 D5 to D0 : DUTY2 DUTY value for brightness 2 setting n : 0 to 63 DUTY value ((n + 1)/64) × 100 [%] * 0 [%] when n = 0. address : 12h PWMDUTY3 12h PWMDUTY3 D7 D6 D5 D4 D3 D2 D1 D0 Register name - - DUTY3 [5] DUTY3 [4] DUTY3 [3] DUTY3 [2] DUTY3 [1] DUTY3 [0] R/W W W W W W W Default 0 0 0 0 0 0 D5 to D0 : DUTY3 DUTY value for brightness 3 setting n : 0 to 63 DUTY value ((n + 1)/64) × 100 [%] * 0 [%] when n = 0. address : 13h PWMDUTY4 13h PWMDUTY4 D7 D6 D5 D4 D3 D2 D1 D0 Register name - - DUTY4 [5] DUTY4 [4] DUTY4 [3] DUTY4 [2] DUTY4 [1] DUTY4 [0] R/W W W W W W W Default 0 0 0 0 0 0 D5 to D0 : DUTY4 DUTY value for brightness 4 setting n : 0 to 63 DUTY value ((n + 1)/64) × 100 [%] * 0 [%] when n = 0. No.A1359-23/27 LV5230LG address : 14h PWMDUTY5 14h PWMDUTY5 D7 D6 D5 D4 D3 D2 D1 D0 Register name - - DUTY5 [5] DUTY5 [4] DUTY5 [3] DUTY5 [2] DUTY5 [1] DUTY5 [0] R/W W W W W W W Default 0 0 0 0 0 0 D5 to D0 : DUTY5 DUTY factor value for brightness 5 setting n : 0 to 63 DUTY value ((n + 1)/64) × 100 [%] * 0 [%] when n = 0. address : 15h PWMDUTY6 15h PWMDUTY6 D7 D6 D5 D4 D3 D2 D1 D0 Register name - - DUTY6 [5] DUTY6 [4] DUTY6 [3] DUTY6 [2] DUTY6 [1] DUTY6 [0] R/W W W W W W W Default 0 0 0 0 0 0 D5 to D0 : DUTY6 DUTY factor value for brightness 6 setting n : 0 to 63 DUTY value ((n + 1)/64) × 100 [%] * 0 [%] when n = 0. address : 16h PWMDUTY7 16h PWMDUTY7 D7 D6 D5 D4 D3 D2 D1 D0 Register name - - DUTY7 [5] DUTY7 [4] DUTY7 [3] DUTY7 [2] DUTY7 [1] DUTY7 [0] R/W W W W W W W Default 0 0 0 0 0 0 D5 to D0 : DUTY7 DUTY factor value for brightness 7 setting n : 0 to 63 DUTY value ((n + 1)/64) × 100 [%] * 0 [%] when n = 0. No.A1359-24/27 LV5230LG address : 20h to 9Dh FRAMEDATA 20h to 9Dh FRAMEDATA D7 D6 D5 D4 D3 D2 D1 D0 Register name BRn LMn [2] LMn [1] LMn [0] BRm LMm [2] LMm [1] LMm [0] R/W W W W W W W W W Default 0 0 0 0 0 0 0 0 D2 to D0 : LM11m Frame 1 : vertical 1st : horizontal (n + 1) th LED brightness D2 D1 0 0 D0 0 Off 0 0 1 On at brightness set by PWMDUTY1 register 0 1 0 On at brightness set by PWMDUTY2 register 0 1 1 On at brightness set by PWMDUTY3 register 1 0 0 On at brightness set by PWMDUTY4 register 1 0 1 On at brightness set by PWMDUTY5 register 1 1 0 On at brightness set by PWMDUTY6 register 1 1 1 On at brightness set by PWMDUTY7 register D3 : BR11m Frame 1 : vertical 1: horizontal (n + 1) th LED flashing/brightness inversion enable 0 : Flashing/brightness inversion disabled 1 : Flashing/brightness inversion enabled D6 to D4 : LM11n Frame 1 : vertical 1 : horizontal (n) th LED brightness D2 D1 0 0 D0 0 Off 0 0 1 On at brightness set by PWMDUTY1 register 0 1 0 On at brightness set by PWMDUTY2 register 0 1 1 On at brightness set by PWMDUTY3 register 1 0 0 On at brightness set by PWMDUTY4 register 1 0 1 On at brightness set by PWMDUTY5 register 1 1 0 On at brightness set by PWMDUTY6 register 1 1 1 On at brightness set by PWMDUTY7 register D7 : BR11n Frame 1 : vertical 1 : horizontal (n) th LED flashing/brightness inversion enable 0 : Flashing/brightness inversion disabled 1 : Flashing/brightness inversion enabled * These are used for each LED data. One register is loaded with two LEDs data. See the table on the following page for the storage address of each dot. No.A1359-25/27 LV5230LG Frame Data Register Tables xxH : higher-order 4 bits of register xx xxL : lower-order 4 bits of register xx 17 × 7 mode Frame 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1 20H 20L 21H 21L 22H 22L 23H 23L 24H 24L 25H 25L 26H 26L 27H 27L 28H 2 29H 29L 2AH 2AL 2BH 2BL 2CH 2CL 2DH 2DL 2EH 2EL 2FH 2FL 30H 30L 31H 3AH 3 32H 32L 33H 33L 34H 34L 35H 35L 36H 36L 37H 37L 38H 38L 39H 39L 4 3BH 3BL 3CH 3CL 3DH 3DL 3EH 3EL 3FH 3FL 40H 40L 41H 41L 42H 42L 43H 5 44H 44L 45H 45L 46H 46L 47H 47L 48H 48L 49H 49L 4AH 4AL 4BH 4BL 4CH 6 4DH 4DL 4EH 4EL 4FH 4FL 50H 50L 51H 51L 52H 52L 53H 53L 54H 54L 55H 7 56H 56L 57H 57L 58H 58L 59H 59L 5AH 5AL 5BH 5BL 5CH 5CL 5DH 5DL 5EH Frame 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1 5FH 5FL 60H 60L 61H 61L 62H 62L 63H 63L 64H 64L 65H 65L 66H 66L 67H 2 68H 68L 69H 69L 6AH 6AL 6BH 6BL 6CH 6CL 6DH 6DL 6EH 6EL 6FH 6FL 70H 3 71H 71L 72H 72L 73H 73L 74H 74L 75H 75L 76H 76L 77H 77L 78H 78L 79H 4 7AH 7AL 7BH 7BL 7CH 7CL 7DH 7DL 7EH 7EL 7FH 7FL 80H 80L 81H 81L 82H 5 83H 83L 84H 84L 85H 85L 86H 86L 87H 87L 88H 88L 89H 89L 8AH 8AL 8BH 6 8CH 8CL 8DH 8DL 8EH 8EL 8FH 8FL 90H 90L 91H 91L 92H 92L 93H 93L 94H 7 95H 95L 96H 96L 97H 97L 98H 98L 99H 99L 9AH 9AL 9BH 9BL 9CH 9CL 9DH 15 × 5 mode Frame 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 20H 20L 21H 21L 22H 22L 23H 23L 24H 24L 25H 25L 26H 26L 27H 2 29H 29L 2AH 2AL 2BH 2BL 2CH 2CL 2DH 2DL 2EH 2EL 2FH 2FL 30H 3 32H 32L 33H 33L 34H 34L 35H 35L 36H 36L 37H 37L 38H 38L 39H 4 3BH 3BL 3CH 3CL 3DH 3DL 3EH 3EL 3FH 3FL 40H 40L 41H 41L 42H 5 44H 44L 45H 45L 46H 46L 47H 47L 48H 48L 49H 49L 4AH 4AL 4BH Frame 2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 4DH 4DL 4EH 4EL 4FH 4FL 50H 50L 51H 51L 52H 52L 53H 53L 54H 5DH 2 56H 56L 57H 57L 58H 58L 59H 59L 5AH 5AL 5BH 5BL 5CH 5CL 3 5FH 5FL 60H 60L 61H 61L 62H 62L 63H 63L 64H 64L 65H 65L 66H 4 68H 68L 69H 69L 6AH 6AL 6BH 6BL 6CH 6CL 6DH 6DL 6EH 6EL 6FH 5 71H 71L 72H 72L 73H 73L 74H 74L 75H 75L 76H 76L 77H 77L 78H No.A1359-26/27 LV5230LG address : FFh STATUS FFh STATUS D7 D6 D5 D4 D3 D2 D1 D0 Register name - - - - - DFIF FEDIF SCRIF R R R X X X X X R/W Default D0 : SCRIF End of scroll interrupt occurrence flag 0 : No end of scroll interrupt has occurred. 1 : An end of scroll interrupt has occurred. * The flag needs to be cleared manually (CTRL1.SCRLCLR). D1 : FEDIF End of fade interrupt occurrence flag 0 : No end of fade interrupt has occurred. 1 : An end of fade interrupt has occurred. * The flag needs to be cleared manually (CTRL1.FADECLR). D2 : DFIF End of palette fade interrupt occurrence flag 0 : No end of palette fade interrupt has occurred. 1 : An end of palette fade interrupt has occurred. * The flag needs to be cleared manually (CTRL1.DFCLR). The OR of SCRIF, FEDIF and DFIF appear at the interrupt pin. * The addresses used here are all dummy and not used in actual communications. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of October, 2010. Specifications and information herein are subject to change without notice. PS No.A1359-27/27