FL-101 FlashLINK JTAG Programmer Data brief Features ■ Allows PC or Notebook parallel port to program UPSD and PSD devices using PSDsoft Express software development tool. ■ Supports IEEE 1149.1 JTAG signals (TCK, TMS, TDI, TDO). ■ Supports additional signals (TERR and TSTAT) to reduce programming time. ■ Single FlashLINK cable assembly supports both 3.3 V and 5 V target devices with no manual configuration. Target device may operate from 2.7 V to 5.5 V. ■ Flying Lead cable included to adapt to any target connector using 0.025" square posts. ■ Loop Test cable included to validate PC parallel port operation. Table 1. Device summary Reference Order code FlashLINK JTAG Programmer FL-101 October 2011 Description The FL-101 is a FlashLINK JTAG programming cable for PSD and UPSD microcontroller families. Driven by a PC through a parallel port, it allows In-System Programming (ISP) of PSD and UPSD devices located on an application board. Doc ID 022303 Rev 1 For further information contact your local STMicroelectronics sales office. 1/3 www.st.com 3 Ordering information FL-101 Ordering information The FL-101 can be ordered from your nearest ST distributor or sales office (ST order code: FL-101). For more information and complete documentation, please refer to the STMicroelectronics microcontroller support site on www.st.com. Revision history Table 2. 2/3 Document revision history Date Revision 03-Oct-2011 1 Changes Initial release. Doc ID 022303 Rev 1 FL-101 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 022303 Rev 1 3/3