STM3240G-SK/IAR IAR™ starter kit for STM32F4 series 32-bit microcontrollers Data brief Features ■ The IAR Embedded WorkBench® for ARM (EWARM) software package with: – KickStart™ C/C++ compiler for output of code up to 32 Kbytes – VisualSTATE® code generator, 20-state version – C-SPY® high-level language debugger – Editor, linker and librarian tools ■ Embedded J-Link in-circuit debugger/ programmer with USB interface to host PC and 20-pin JTAG application interface ■ Full-featured KickStart development board with target microcontroller Figure 1. Evaluation board Figure 2. Starter kit Description The IAR KickStart Kit™ is a complete, costeffective solution for starting application development and evaluating the STMicroelectronics STM32F4-series ARM corebased microcontrollers. This IAR KickStart Kit contains all the necessary hardware and software and allows you to design, start to develop, integrate and test your applications, right out of the box: ■ Evaluation board with STM32F407ZG MCU ■ IAR Embedded Workbench for ARM 32K limited edition ■ IAR visualSTATE 20-state evaluation edition ■ Embedded IAR J-Link Lite debug probe for STMicroelectronics Cortex-M devices ■ Example applications made for the STM32F407ZG board ■ RTOS board support from IAR Systems RTOS partners IAR KickStart kits are available for a full range of ST ARM core-based microcontrollers. November 2011 Doc ID 022487 Rev 1 For further information contact your local STMicroelectronics sales office. 1/3 www.st.com 3 Ordering information STM3240G-SK/IAR STM32F407ZG evaluation board features ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● STM32F407ZG MCU Four indicator LEDs Joystick Audio (headphone jack) Separate camera connector User and WakeUp buttons Small color LCD 20-pin 0.1'' JTAG/SWD connector Small 20-pin 0.05” trace tool connector Two USB connectors (full speed only) – OTG (On-The-Go) – Host Two USART - DB9 connectors CAN - DB9 connector Ethernet UEXT (Universal expansion connector) SD/MMC card slot Multiple power supply options: – J-Link – USB OTG – CAN – External supply – Trace connector Power supply LED Reset button and circuit Temperature sensor 3-axis accelerometer Prototyping area Tamper button External RAM memory headers Ordering information IAR KickStart kits can be ordered from IAR or from your nearest ST distributor or sales office (ST order code: STM3240G-SK/IAR). For more information and complete documentation, please refer to the IAR web site or the STMicroelectronics microcontroller support site on www.st.com. Revision history Table 1. 2/3 Document revision history Date Revision 24-Nov-2011 1 Changes Initial release. Doc ID 022487 Rev 1 STM3240G-SK/IAR Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 022487 Rev 1 3/3