STMICROELECTRONICS STIH273

STiH273
HD cable/terrestrial STB processor with integrated demodulators
and low power standby controller
Data brief
Features
Description
■
ST40 applications CPU with 256 KB L2 cache
■
16-bit LMI supporting DDR2/DDR3
■
Decoding of H264, MPEG2, VC-1 and AVS HD
video streams
■
3DTV decoding and display compatible with
HDMI 1.4a
The STiH273 uses the latest process technology
to provide a cost-effective, feature rich, highly
integrated SoC for set-top boxes (STBs). It is
targeted at the advanced decoding STB market
across cable and terrestrial networks, and is
suitable for operator markets (with advanced
security) and retail markets worldwide.
■
Extensive connectivity (2 × USB 2.0 ports;
Ethernet MII/RMII/TMII port; SD/MMC card
port; eSATA port; PCI-e)
■
Secure boot from SLC NAND Flash or Serial
NOR Flash; eMMC booting option
■
Low-power process and architecture
■
Integrated low power standby controller
■
High-quality video resizing and de-interlacing
■
Integrated Ethernet PHY
■
Targets two layer PCBs for cost-effective
zapper STB applications
■
Integrates dual mode DVB-T/DVB-C
demodulation and FEC
JTAG
CPU/FPU
The STiH273 provides a solution for operators
and manufacturers to specify a range of costeffective, high performance STBs, including basic
zappers, interactive STBs, and DVR STBs with
content delivery possible using broadcast or
broadband networks or both (hybrid STBs).
The STiH273 integrates a high performance dual
mode, cable/terrestrial receiver, supporting
DVB-C or DVB-T reception, channel
demodulation, and forward error correction (FEC).
The DVB-C receiver is compliant with ITU-T J.83
Annex A/C, and the DVB-T receiver is compliant
with ETSI EN-300744 v1.5.1, Nordig Unified
(v2.2.1) and DTG 7.2.
Resets
Clocks
Modes
Analog out
PCM I/O
S/PDIF out
STB peripherals I/O
external interrupts
Clock Gen
System
services
Audio I/O
Peripherals
System
interfaces
SLC NAND Flash
Serial Flash
Dual FDMA
CI-Plus cards
L2 cache
Audio decoder
DDR3 LMI
DDR2/DDR3
STBus
Transport
Security
Video decoder
Display
Video I/O
Dual USB
Low power
standby
controller
eSATA/PCI-e
Connectivity
DVB-C
DVB-T
demodulator
Transport streams
Parallel/serial in/out
July 2012
Transport
stream
Ethernet
SD-MMC/SDIO
IF in
Analog video
HDMI
Doc ID 022872 Rev 2
For further information contact your local STMicroelectronics sales office.
1/4
www.st.com
4
Introduction
1
STiH273
Introduction
The STiH273 offers current users of ST’s growing family of advanced decoding ICs
enhancements in performance and features, enabling operators to offer consumers new
multimedia-rich services and viewing experiences, including new 3DTV features. Faster
DDR3 memory is also supported, and the applications CPU benefits from an L2 cache. The
STiH273 keeps pace with the latest advanced security requirements of the main CA
vendors, and an integrated standby controller enables the STiH273 to target stringent low
power regulations.
2/4
Features
Benefits
Integrated dual mode DVB-C/DVB-T
demodulation/FEC.
Highly integrated STB solution, reducing
component count and manufacturing BOM.
ST40 applications CPU, with 32KI and 32KD L1
caches and 256K L2 cache.
High performance processing for applications and
middleware.
Integrated low power standby controller within its
own power island.
Secure hibernation to, and fast resume from, very
low power passive standby mode, targeting STB
standby power < 0.5 W.
Latest generation of ST's Delta video decoder
coupled with a High Quality Video Display
Pipeline (HQVDP).
Decoding of advanced high definition standards
(MPEG2, H264, VC-1, AVS) plus the performance
and flexibility for web-based content decoding such
as Flash®, DivX™, MJPEG and Real®, without
impacting applications CPU performance.
Dual USB 2.0 hosts, eSATA, Ethernet MAC with
MII/RMII/TMII interfaces, PCI-e, SD-MMC/SDIO
interface.
Extensive high speed connectivity for the widest
range of STB peripherals, such as Flash drives,
external HDDs, Ethernet, home network controllers
(such as MoCA®, Wi-Fi), DOCSIS® modem and
memory cards.
NOCS3.0, NSK2.0 and DVB-CSA3 ready.
Fully compliant with the latest advanced security
requirements of CA vendors.
Ball compatible with other STiH2xx family
variants.
Single platform versatility across all networks
(satellite, cable, terrestrial, IP).
Doc ID 022872 Rev 2
STiH273
2
Revision history
Revision history
Table 1.
Document revision history
Date
Revision
Changes
28-Feb-2012
1
Initial release.
17-Jul-2012
2
– Updated the version of Nordig Unified to v2.2.1
– Updated the version of DTG to 7.2.
– Removed references to NOCS1.0/1.1/1.2 and Digitenne.
Doc ID 022872 Rev 2
3/4
STiH273
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
Doc ID 022872 Rev 2