STM8L101-EVAL STM8L101-EVAL evaluation board Data brief Features ■ 5 V power jack supply ■ Audio play ■ Micro SD Card™ ■ 64 Kbit I2C EEPROM ■ One channel of RS-232 communication ■ Bi-color LED ■ Economic analog voltage measurement based on comparator ■ SWIM debug support ■ 122 x 32 dot-matrix serial interface LCD module ■ Joystick with 4-direction control and selector ■ Reset and User button ■ 3 LEDs ■ Extension connector for daughterboard ■ One 10 K potentiometer Description The STM8L101-EVAL is composed of two boards, a motherboard and a daughterboard. The STM8L1/L2 motherboard is called MB709. It includes all peripherals which are connected to the MCU on the daughterboard and connects to the daughterboard via two 36-pin connectors. The STM8L1 daughterboard is called MB710 and has an STM8L101 MCU. The full range of hardware features on the STM8L101-EVAL helps you to evaluate all peripherals (micro SD Card, USART, EEPROM, LCD, for example) and develop your own applications. The motherboard and daughterboard are a complete development platform for the STM8L101 microcontroller with comparator, I2C, SPI, USART and SWIM debugging support. August 2010 Doc ID 17773 Rev 1 For further information contact your local STMicroelectronics sales office. 1/4 www.st.com 4 STM8L101-EVAL Figure 1. Functional block diagram I2C EEPROM ADC I2C PWM SWIM connector Audio circuit SWIM BEEP Bi-color LED Joystick USART GPIO’s LED’s STM8L1/L2-MB SPI RS232 transceiver Level translator RS232 connector MicroSD card LCD Push button Compa rator BNC connector Economic Measurement 5V power jack ADC Potentiometer 1.8 to 3.3V regulator STice connector 3.3V regulator GPIO’s Extension connector STM8L1/L2-MB (MB709) STM8L101 STM8L1-DB MCU STM8L1-DB (MB710) 2/4 Doc ID 17773 Rev 1 ai18610 Ordering information 1 STM8L101-EVAL Ordering information Table 1. Device summary Order code Reference STM8L101-EVAL 2 STM8L101-EVAL evaluation board Revision history Table 2. Document revision history Date Revision 02-Aug-2010 1 Changes Initial release. Doc ID 17773 Rev 1 3/4 STM8L101-EVAL Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 4/4 Doc ID 17773 Rev 1