SN74LVCH16373A 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS www.ti.com SCAS568M – MARCH 1996 – REVISED FEBRUARY 2006 FEATURES • • • • • • • • DGG, DGV, OR DL PACKAGE (TOP VIEW) Member of the Texas Instruments Widebus™ Family Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C Ioff Supports Partial-Power-Down Mode Operation Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC) Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors Latch-Up Performance Exceeds 250 mA Per JESD 17 ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) 1OE 1Q1 1Q2 GND 1Q3 1Q4 VCC 1Q5 1Q6 GND 1Q7 1Q8 2Q1 2Q2 GND 2Q3 2Q4 VCC 2Q5 2Q6 GND 2Q7 2Q8 2OE 1 48 2 47 3 46 4 45 5 44 6 43 7 42 8 41 9 40 10 39 11 38 12 37 13 36 14 35 15 34 16 33 17 32 18 31 19 30 20 29 21 28 22 27 23 26 24 25 1LE 1D1 1D2 GND 1D3 1D4 VCC 1D5 1D6 GND 1D7 1D8 2D1 2D2 GND 2D3 2D4 VCC 2D5 2D6 GND 2D7 2D8 2LE DESCRIPTION/ORDERING INFORMATION This 16-bit transparent D-type latch is designed for 1.65-V to 3.6-V VCC operation. ORDERING INFORMATION PACKAGE (1) TA FBGA – GRD FBGA – ZRD (Pb-free) SSOP – DL –40°C to 85°C SN74LVCH16373ADL Tape and reel SN74LVCH16373ADLR Tape and reel TVSOP – DGV Tape and reel VFBGA – ZQL (Pb-free) SN74LVCH16373AZRDR Tube TSSOP – DGG VFBGA – GQL (1) Tape and reel ORDERABLE PART NUMBER SN74LVCH16373AGRDR Tape and reel SN74LVCH16373ADGGR 74LVCH16373ADGGRG4 SN74LVCH16373ADGVR 74LVCH16373ADGVRE4 SN74LVCH16373AGQLR SN74LVCH16373AZQLR TOP-SIDE MARKING LDH373A LVCH16373A LVCH16373A LDH373A LDH373A Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Widebus is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1996–2006, Texas Instruments Incorporated SN74LVCH16373A 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS www.ti.com SCAS568M – MARCH 1996 – REVISED FEBRUARY 2006 DESCRIPTION/ORDERING INFORMATION (CONTINUED) The SN74LVCH16373A is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. It can be used as two 8-bit latches or one 16-bit latch. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the levels set up at the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components. OE does not affect internal operations of the latch. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in a mixed 3.3-V/5-V system environment. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended. TERMINAL ASSIGNMENTS (1) GQL OR ZQL PACKAGE (56-Ball GQL/ZQL Package) (TOP VIEW) 1 2 3 4 5 6 A B C D E F G H J K XXXXXXX (1) 1 2 3 4 5 6 A 1OE NC NC NC NC 1LE B 1Q2 1Q1 GND GND 1D1 1D2 C 1Q4 1Q3 VCC VCC 1D3 1D4 D 1Q6 1Q5 GND GND 1D5 1D6 E 1Q8 1Q7 1D7 1D8 F 2Q1 2Q2 2D2 2D1 G 2Q3 2Q4 GND GND 2D4 2D3 H 2Q5 2Q6 VCC VCC 2F6 2D5 J 2Q7 2Q8 GND GND 2D8 2D7 K 2OE NC NC NC NC 2LE NC – No internal connection GRD OR ZRD PACKAGE (TOP VIEW) 1 2 3 4 5 TERMINAL ASSIGNMENTS (1) (54-Ball GRD/ZRD Package) 6 A 1 2 3 4 5 6 A 1Q1 NC 1OE 1LE NC 1D1 NC NC 1D2 1D3 B 1Q3 1Q2 B C 1Q5 1Q4 VCC VCC 1D4 1D5 C D 1Q7 1Q6 GND GND 1D6 1D7 E 2Q1 1Q8 GND GND 1D8 2D1 D F 2Q3 2Q2 GND GND 2D2 2D3 G 2Q5 2Q4 VCC VCC 2D4 2D5 F H 2Q7 2Q6 NC NC 2D6 2D7 G J 2Q8 NC 2OE 2LE NC 2D8 E H J (1) 2 NC – No internal connection Submit Documentation Feedback SN74LVCH16373A 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS www.ti.com SCAS568M – MARCH 1996 – REVISED FEBRUARY 2006 FUNCTION TABLE INPUTS OE LE D OUTPUT Q L H H H L H L L L L X Q0 H X X Z LOGIC DIAGRAM (POSITIVE LOGIC) 1OE 1LE 1 2OE 48 2LE C1 1D1 47 2 1D 24 25 C1 1Q1 2D1 36 To Seven Other Channels 13 1D 2Q1 To Seven Other Channels Pin numbers shown are for the DGG, DGV, and DL packages. Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT VCC Supply voltage range –0.5 6.5 V VI Input voltage range (2) –0.5 6.5 V VO Voltage range applied to any output in the high-impedance or power-off state (2) –0.5 6.5 V VO Voltage range applied to any output in the high or low state (2) (3) –0.5 VCC + 0.5 V IIK Input clamp current VI < 0 –50 mA IOK Output clamp current VO < 0 –50 mA IO Continuous output current ±50 mA ±100 mA Continuous current through each VCC or GND θJA Package thermal impedance (4) DGG package 70 DGV package 58 DL package 63 GQL/ZQL package 42 GRD/ZRD package Tstg (1) (2) (3) (4) Storage temperature range °C/W 36 –65 150 °C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed. The value of VCC is provided in the recommended operating conditions table. The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback 3 SN74LVCH16373A 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS www.ti.com SCAS568M – MARCH 1996 – REVISED FEBRUARY 2006 Recommended Operating Conditions (1) VCC Supply voltage Operating Data retention only VCC = 1.65 V to 1.95 V VIH High-level input voltage MIN MAX 1.65 3.6 1.5 Low-level input voltage VI VCC = 2.3 V to 2.7 V 1.7 VCC = 2.7 V to 3.6 V 2 VO Output voltage IOH High-level output current 0.35 × VCC 0.7 VCC = 2.7 V to 3.6 V 0.8 0 5.5 High or low state 0 VCC 3-state 0 5.5 VCC = 1.65 –4 VCC = 2.3 V –8 VCC = 2.7 V –12 VCC = 3 V –24 VCC = 1.65 IOL Low-level output current ∆t/∆v Input transition rise or fall rate TA Operating free-air temperature (1) 4 V VCC = 2.3 V to 2.7 V Input voltage V 0.65 × VCC VCC = 1.65 V to 1.95 V VIL UNIT V V V mA 4 VCC = 2.3 V 8 VCC = 2.7 V 12 VCC = 3 V 24 –40 mA 10 ns/V 85 °C All unused control inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback SN74LVCH16373A 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS www.ti.com SCAS568M – MARCH 1996 – REVISED FEBRUARY 2006 Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = –100 µA VOH 1.65 V to 3.6 V 1.65 V 1.2 IOH = –8 mA 2.3 V 1.7 2.7 V 2.2 3V 2.4 IOH = –24 mA 3V 2.2 IOL = 100 µA 1.65 V to 3.6 V 0.2 IOL = 4 mA 1.65 V 0.45 IOL = 8 mA 2.3 V 0.7 IOL = 12 mA 2.7 V 0.4 3V 0.55 IOL = 24 mA II VI = 0 to 5.5 V ±5 V µA (2) 1.65 V VI = 1.07 V VI = 0.7 V (2) 45 2.3 V VI = 1.7 V VI = 0.8 V µA –45 75 3V VI = 2 V –75 3.6 V ±500 Ioff VI or VO = 5.5 V 0 ±10 µA IOZ VO = 0 to 5.5 V 3.6 V ±10 µA VI = 0 to 3.6 ICC ∆ICC (1) (2) (3) (4) UNIT V 3.6 V VI = 0.58 V II(hold) MAX VCC – 0.2 IOH = –4 mA IOH = –12 mA VOL MIN TYP (1) VCC V (3) VI = VCC or GND 3.6 V ≤ VI ≤ 5.5 V (4) One input at VCC – 0.6 V, IO = 0 20 3.6 V Other inputs at VCC or GND 20 2.7 V to 3.6 V 500 µA µA Ci VI = VCC or GND 3.3 V 5 pF Co VO = VCC or GND 3.3 V 6.5 pF All typical values are at VCC = 3.3 V, TA = 25°C. This information was not available at the time of publication. This is the bus-hold maximum dynamic current required to switch the input from one state to another. This applies in the disabled state only. Timing Requirements over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1) VCC = 1.8 V ± 0.15 V VCC = 2.5 V ± 0.2 V MIN MIN MAX MAX VCC = 2.7 V MIN MAX VCC = 3.3 V ± 0.3 V MIN UNIT MAX Pulse duration, LE high (1) (1) 3.3 3.3 ns tsu Setup time, data before LE↓ (1) (1) 1.7 1.7 ns th Hold time, data after LE↓ (1) (1) 1.2 1.2 ns tw (1) This information was not available at the time of publication. Submit Documentation Feedback 5 SN74LVCH16373A 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS www.ti.com SCAS568M – MARCH 1996 – REVISED FEBRUARY 2006 Switching Characteristics over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1) PARAMETER tpd ten tdis (1) FROM (INPUT) D LE OE OE VCC = 1.8 V ± 0.15 V VCC = 2.5 V ± 0.2 V MIN MAX MIN MAX (1) (1) (1) (1) (1) (1) Q (1) (1) Q (1) (1) TO (OUTPUT) Q VCC = 2.7 V MIN VCC = 3.3 V ± 0.3 V UNIT MAX MIN MAX (1) 4.9 1.6 4.2 (1) 5.3 2.1 4.6 (1) (1) 5.7 1.3 4.7 ns (1) (1) 6.3 2.5 5.9 ns ns This information was not available at the time of publication. Operating Characteristics TA = 25°C TEST CONDITIONS PARAMETER Cpd (1) 6 Power dissipation capacitance per latch Outputs enabled Outputs disabled f = 10 MHz This information was not available at the time of publication. Submit Documentation Feedback VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V TYP TYP TYP (1) (1) 39 (1) (1) 6 UNIT pF SN74LVCH16373A 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS www.ti.com SCAS568M – MARCH 1996 – REVISED FEBRUARY 2006 PARAMETER MEASUREMENT INFORMATION VLOAD S1 RL From Output Under Test Open GND CL (see Note A) RL TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open VLOAD GND LOAD CIRCUIT INPUT VCC 1.8 V ± 0.15 V 2.5 V ± 0.2 V 2.7 V 3.3 V ± 0.3 V VI tr/tf VCC VCC 2.7 V 2.7 V ≤2 ns ≤2 ns ≤2.5 ns ≤2.5 ns VM VLOAD CL RL V∆ VCC/2 VCC/2 1.5 V 1.5 V VCC VCC 6V 6V 30 pF 30 pF 50 pF 50 pF 1 kΩ 500 Ω 500 Ω 500 Ω 0.15 V 0.15 V 0.3 V 0.3 V VI Timing Input VM 0V tw tsu th VI VM Input VM VI VM Data Input VM 0V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VI VM Input VM 0V tPHL tPLH VOH VM Output VM VOL tPHL VM VM 0V tPZL tPLZ VLOAD/2 VM tPZH VOH Output Output Waveform 1 S1 at VLOAD (see Note B) tPLH VM VI Output Control VM VOL Output Waveform 2 S1 at GND (see Note B) VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS VOL + V∆ VOL tPHZ VM VOH − V∆ VOH ≈0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω. D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuit and Voltage Waveforms Submit Documentation Feedback 7 PACKAGE OPTION ADDENDUM www.ti.com 6-Aug-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty 74LVCH16373ADGGRG4 ACTIVE TSSOP DGG 48 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 74LVCH16373ADGVRE4 ACTIVE TVSOP DGV 48 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 74LVCH16373ADGVRG4 ACTIVE TVSOP DGV 48 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 74LVCH16373ADLRG4 ACTIVE SSOP DL 48 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVCH16373ADGGR ACTIVE TSSOP DGG 48 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVCH16373ADGVR ACTIVE TVSOP DGV 48 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVCH16373ADL ACTIVE SSOP DL 48 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVCH16373ADLG4 ACTIVE SSOP DL 48 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVCH16373ADLR ACTIVE SSOP DL 48 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVCH16373AGQLR NRND BGA MI CROSTA R JUNI OR GQL 56 1000 SNPB Level-1-240C-UNLIM SN74LVCH16373AZQLR ACTIVE BGA MI CROSTA R JUNI OR ZQL 56 1000 Green (RoHS & no Sb/Br) SNAGCU Level-1-260C-UNLIM TBD Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 6-Aug-2007 incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 22-Sep-2007 TAPE AND REEL BOX INFORMATION Device Package Pins Site Reel Diameter (mm) Reel Width (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74LVCH16373ADGGR DGG 48 SITE 41 330 24 8.6 15.8 1.8 12 24 Q1 SN74LVCH16373ADGVR DGV 48 SITE 41 330 24 6.8 10.1 1.6 12 24 Q1 SN74LVCH16373ADLR DL 48 SITE 41 330 32 11.35 16.2 3.1 16 32 Q1 SN74LVCH16373AGQLR GQL 56 SITE 32 330 16 4.8 7.3 1.45 8 16 Q1 SN74LVCH16373AZQLR ZQL 56 SITE 32 330 16 4.8 7.3 1.45 8 16 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 22-Sep-2007 Device Package Pins Site Length (mm) Width (mm) Height (mm) SN74LVCH16373ADGGR DGG 48 SITE 41 346.0 346.0 0.0 SN74LVCH16373ADGVR DGV 48 SITE 41 346.0 346.0 0.0 SN74LVCH16373ADLR DL 48 SITE 41 346.0 346.0 0.0 SN74LVCH16373AGQLR GQL 56 SITE 32 346.0 346.0 0.0 SN74LVCH16373AZQLR ZQL 56 SITE 32 346.0 346.0 0.0 Pack Materials-Page 2 MECHANICAL DATA MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0°–8° 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side. Falls within JEDEC: 24/48 Pins – MO-153 14/16/20/56 Pins – MO-194 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MECHANICAL DATA MSSO001C – JANUARY 1995 – REVISED DECEMBER 2001 DL (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 48 PINS SHOWN 0.025 (0,635) 0.0135 (0,343) 0.008 (0,203) 48 0.005 (0,13) M 25 0.010 (0,25) 0.005 (0,13) 0.299 (7,59) 0.291 (7,39) 0.420 (10,67) 0.395 (10,03) Gage Plane 0.010 (0,25) 1 0°–ā8° 24 0.040 (1,02) A 0.020 (0,51) Seating Plane 0.110 (2,79) MAX 0.004 (0,10) 0.008 (0,20) MIN PINS ** 28 48 56 A MAX 0.380 (9,65) 0.630 (16,00) 0.730 (18,54) A MIN 0.370 (9,40) 0.620 (15,75) 0.720 (18,29) DIM 4040048 / E 12/01 NOTES: A. B. C. D. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0.006 (0,15). Falls within JEDEC MO-118 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MECHANICAL DATA MTSS003D – JANUARY 1995 – REVISED JANUARY 1998 DGG (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 48 PINS SHOWN 0,27 0,17 0,50 48 0,08 M 25 6,20 6,00 8,30 7,90 0,15 NOM Gage Plane 1 0,25 24 0°– 8° A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 48 56 64 A MAX 12,60 14,10 17,10 A MIN 12,40 13,90 16,90 DIM 4040078 / F 12/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Telephony www.ti.com/telephony Low Power Wireless www.ti.com/lpw Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2007, Texas Instruments Incorporated