SF11G - SF18G CREAT BY ART 1.0AMP. Glass Passivated Super Fast Rectifiers DO-41 Features High efficiency, low VF High current capability High reliability High surge current capability Low power loss For use in low voltage, high frequency inverter, Free wheeling, and polarity protection application Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Pure tin plated, lead free, solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode High temperature soldering guaranteed: 260℃/10 seconds/.375",(9.5mm) lead lengths at 5 lbs., (2.3kg) tension Mounting position: Any Weight: 0.35 grams Ordering Information (example) Part No. Package Packing INNER TAPE Packing code Packing code (Green) SF11G DO-41 3K / AMMO box 52mm A0 A0G Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Maximum Recurrent Peak Reverse Voltage VRRM SF 11G 50 Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 500 600 V Maximum Average Forward Rectified Current IF(AV) 1 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM 30 A Type Number Symbol Maximum Instantaneous Forward Voltage (Note 1) @1A VF Maximum DC Reverse Current at Rated @ TA=25 ℃ DC Blocking Voltage @ TA=125 ℃ IR Maximum Reverse Recovery Time (Note 2) Trr Typical Junction Capacitance (Note 3) Cj Typical Thermal Resistance Operating Temperature Range Storage Temperature Range SF 12G 100 SF 13G 150 SF 14G 200 SF 15G 300 SF 16G 400 SF 17G 500 SF 18G 600 0.95 1.3 Units V 1.7 V 5.0 uA 100 uA 35 nS 20 10 80 pF RθJA RθJL 20 TJ - 65 to + 150 O C TSTG - 65 to + 150 O C O Note 1: Pulse Test with PW=300 usec, 1% Duty Cycle Note 2: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 3: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Version:D12 C/W RATINGS AND CHARACTERISTIC CURVES (SF11G THRU SF18G) FIG.2- TYPICAL REVERSE CHARACTERISTICS 1000 1.5 INSTANTANEOUS REVERSE CURRENT (uA) RESISTIVE OR INDUCTIVE LOAD 1.0 0.5 0.0 0 25 50 75 100 125 150 175 PEAK FORWARD SURGE CURRENT (A) AMBIENT TEMPERATURE (oC) FIG. 3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT TA=125℃ 10 TA=75℃ 1 TA=25℃ 0.1 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 35 30 25 8.3ms Single Half Sine Wave JEDEC Method 20 FIG. 5- TYPICAL FORWARD CHARACTERISTICS 100 15 10 5 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 4- TYPICAL JUNCTION CAPACITANCE 70 JUNCTION CAPACITANCE (pF) 100 0 60 50 40 TA=25℃ INSTANTANEOUS FORWARD CURRENT (A) AVERAGE FORWARD CURRENT (A) FIG.1- MAXIMUM AVERAGE FORWARD CURRENT DERATING 10 SF11G-SF14G 1 SF15G-SF16G 0.1 TA=25℃ Pulse Width=300us SF17G-SF18G 1% Duty Cycle 0.01 0.4 30 SF11G-SF14G 0.6 0.8 1 1.2 1.4 1.6 FORWARD VOLTAGE (V) 20 10 SF15G-SF18G 0 0.1 1 10 100 1000 REVERSE VOLTAGE (V) Version:D12 1.8 Ordering information Part No. SF1xG Package Packing INNER TAPE Packing code Packing code (Green) DO-41 3K / AMMO box 52mm A0 A0G DO-41 3K / AMMO box 26mm A1 A1G DO-41 5K / 13" Reel 52mm R0 R0G DO-41 5K / 13" Reel 52mm R1 R1G DO-41 1K / Bulk packing B0 B0G Note: "x" is Device Code from "1" thru "8". AXIAL LEAD TAPING SPECIFICATIONS Outline DO-41 DO-41 A ±0.5 5 5 B ±1.5 26 52.4 Z MAX 1.2 1.2 T ±0.4 6 6 E ∣L1-L2∣ MAX MAX 0.8 1 0.8 1 D 330 330 Suggested Mounting Hole Rule Symbol A B C D Unit(mm) 5.1 0.8 3.0 1.2 D1 ±0.3 85.7 85.7 D0 ±0.4 16.6 16.6 Unit (mm) W ±1.0 76 76 Dimensions DIM. Marking Diagram P/N = Specific Device Code G = Green Compound YWW = Date Code Unit(mm) Unit(inch) Min Max Min Max A 2.00 2.70 0.079 0.106 B 0.71 0.86 0.028 0.034 C 25.40 - 1.000 - D 4.20 5.20 0.165 0.205 E 25.40 - 1.000 -